I have an a problem with the touchpad which basically stops gestures from working such as scrolling.
It only happens though when i view youtube videos in fullscreen or any flash video, the problems sorts it self out after a few minutes but it is very annoying.
Just got a brand new laptop, Dell Inspiron 11 3137, and updated to windows 8.1. The touchpad does not work properly now; gestures/scrolling/pointer not working. I've spent over 16 hours getting windows 8.1 installed and then troubleshooting this issue. I've contacted Dell; updated the driver from Dell, even tried installing the latest driver from Synaptic. I even tried setting the Synaptic app to run under the windows 8 version.
Touchpads have been around a long time. It's the last thing I expect not to work properly.
At this point I am ready to send the laptop back and call it quits on windows.
Win 8.1
Aspire E5-521-219J
8gb
ssd drive
I have noticed that after my laptop sleeps, and is woken back up 80% of the time I loose trackpad features, and I need to restart to regain. Reinstalled drivers from support site, did not work.
Windows update changed my keyboard and pointing devices to standard ps/2.
View 3 Replies View RelatedI've been having problems with this device since the day I bought it. The second day I owned it a bad pixel jumped onto the screen. After pushing it for some time physically on the surface of the screen it dissapears for another day or two.
But my biggest problem is taht sometimes touchpad simply stops responding to any gestures or mouse cursor keeps shaking on my screen. The only ting I can do is turn off the whole touchpad and wait for it to repair itself.
Also it happens that for no apparent reason my notebook behaves like as if I had been pressing CRTL button all the time, while I dont do it at all. Pressing S key alone makes it run into save options. Left clicking on the page makes it open in a new bookmark.
I first noticed the issue with sensitivity. The mouse was really sensitive. I then noticed that the gestures don't work either. I cannot scroll using the mouse. So I went into great depths and tried to figure out the problem (but no solution).
So I performed these steps:
-Changed the pointer speed to the fastest (I didn't like the slow pointer speed). The pointer was still pretty slow.
-Decided to change the TouchPad specific drivers. I go to the ELAN tab under mouse settings. I look and see that the "Options" button is greyed out. I also noticed that it said "Standard PS/2 Mouse"I decide to find the software to change the settings and located it in C:Program FilesElantech. I open ETDAniConf.exe and decide to do a test. I uncheck the right click and left click, and some other scroll settings. No avail.
-Then I decide to uninstall and install the drivers. Did that. Nothing changed. Changing the tapping, button, scrolling options does nothing. The mouse settings still shows it as "Standard PS/2 Mouse" even though the tab says ELAN.
-I decide to take a big step and just reinstall Windows 8 altogether using Acer Recovery. Reinstalled it, still facing the same issue. Still recognized as "Standard PS/2" mouse.
-I try another way to attempt to fix the issue. I try to find the most up to date similar driver. I located on that was much newer (2013 version rather than 08.2012). Installed it, restarted computer. Still no avail. Still recognized as "Standard PS/2 Mouse".I decided to go the last route before posting the issue here. I downloaded a copy of Windows 8 Pro from Microsoft website and transferred the ISO into the bootable flash drive. I split the hard drive into a clean partition (60GB) and installed fresh Windows 8 Pro on it, without all the Acer Drivers. Of couse I was missing the network drivers so I had to go on my Desktop to download the drivers online.
- I decide to first go and download the TouchPad drivers. Downloaded them, copied on a Flash Drive, ran them on the Acer laptop. Restarted computer. Still facing the issue.
I got the laptop for a good discount from my work (as a bonus of working there). It was a one time discount. As you noticed, I mentioned that it was recognizing it as "Standard PS/2 Mouse". That is the huge clue that tells me that the drivers are really buggy. The issue here is that the TouchPad drivers are not recognized like it is a TouchPad, but as a Mouse. A mouse that can only do right click, left click.
I rarely use the laptop's touch pad and use a wireless USB mouse. I forgot my mouse and the touch pad wouldn't work when I started up laptop. Borrowed someone's wired USB mouse and it worked, so I ran to Walmart and picked up a $7 wired mouse.
Control Panel > Programs and Features > Elan > Unistall > Reboot = Touch pad now working.
But apparently the Elan didn't reinstall as I don't see it anymore in the Programs and Features list. I thought about downloading and installing the Elan drivers, but I don't want to "fix" something that isn't broken right now.
/edited to say *wireless* USB mouse
After some driver updates (Bios and touchpad) scrolling on touchpad stopped working. I also did a reinstall of the drivers.
View 3 Replies View RelatedI recently got my laptop reformatted due to a BSOD startup loop and when I got it back (the store I bought it from "fixed" it for free), I started it up and noticed that my gestures were missing.
They're kinda hard to live without once you've had them, and it is most unfortunate that I have lost these gestures. So, how do I get them back?
Some Notes: I have an Acer E5-471
My "Mice and other pointing devices" show that I have a PS/2 compatible mouse (I thought they were supposed to have like an ELAN or Synaptics something before the word)....
I tried troubleshooting and it showed me that the 3D Video Controller has no driver and the PCI device doesn't have a driver (I figured I'd include them in case they were the cause of the loss of gestures)....
Touch pad scrolling not working in windows 7 in my lap hp g6-1325ee
View 9 Replies View RelatedI have bought g500 and configured the mouse settings following a post for the same problem in the forum.
It was working for the first time, but after i used external mouse , then it is not working anymore. It is not handy to always take mouse with me.
(This is the screenshot for touchpad configuration on my laptop)
Link to image
If anyone out there runs into an issue with the touchpad on a Sony Vaio where it suddenly stops working it may be due to static electricity. I bought a brand new VGN-NS240E (Jan 08 @ Best Buy) and while setting it up I ran into this issue and have seen many other reports on the WEB of the Sony touchpads suddenly dying. Try these steps for an easy fix:
1 - power down the unit.
2 - unplug the power adapter.
3 - remove the battery.
4 - hold down the power switch for about a minute or two.
5 - re-insert the battery.
6 - reconnect the power adapeter.
7 - power the unit on and see if the touchpad lives!
These quick and simple steps worked for me 2x. Noted on the second time it happened that I shocked the machine after walking across the carpet, that's why I said above I think its related to a static charge - bad design on this model of touch pad I suppose. I have Dell laptops and Acers never seen it before until this Sony.
I recently bought a Vostro V13 (base model) with Celeron 743 + 2gb ram = Ubuntu 9.10.
I decided to switch to Windows 7 64bit. Everything runs fine, except for the touchpad. I doesn't have any multi touch capability what so ever.
I tried a few things:
Update driver automatically
Update driver directly from Synaptics
Install driver from Alps
Nothing worked. Now, I just realized that the Synaptics setting option doesn't even has the "virtual scrolling menu".
After updating the touchpad drivers to 16.3.7.0 A03, there has been an issue with two-finger scrolling.
When I lift my fingers off the touchpad, it jumps to the bottom of the page. This is very frustrating as I have to scroll back up to find my place. This happens with Chrome, Word, IE, Firefox, everything.
The same issue is also plaguing this user: [URL] .....
I have a problem with my TouchPad , the scrolling of right side has been stopped working ... I've installed all drivers that belong to touchpad , but it doesn't work as well as before , mean it doesn't work even ( the right side ) , i just can use my tow fingers for scrolling, but the right side was so much better ..
View 2 Replies View Relatedthe scrolling part of touch pad of my aspire d270 not working
View 1 Replies View RelatedDell Inspiron n4050 touchpad stops working when I plugs in the ac adopter
View 1 Replies View RelatedHas anyone experienced a problem with Acer notebooks where when the user presses any key on the keyboard, the touchpad gets disabled? The 8940G we are reviewing has this problem and I have never seen this happen before. When the touchpad stops functioning the little Synaptics status thing on the taskbar still shows the sensitivity blob when you finger presses the touchpad. This tells me it is still working but something else is interfering.
I have looked around the Synaptics menu for anything relating to this feature and found nothing. I disabled the "hide cursor when typing" feature in Windows already and that didnt fix it.
Z520 touchpad won't work when the laptop comes back from hibernation, any idea since I have to restart each time.
View 3 Replies View RelatedI am using dell inspirion n5010 i3. And i am getting problem with its touchpad . Problem is that while using the laptop, touchpad suddenly stops working but right click option continues to work but at the same time usb mouse continues to work and after pressing ctrl+alt+del and doing logout it starts working.
View 1 Replies View RelatedThe touchpad of my Inspiron N4050 stops working properly everytime i plug my external HD that is AC powered or the HDMI cable. It doesn't matter if the AC of the laptop is connected or not, the touchpad becomes impossible to use. I tried using it in other places thinking of an energy problem at my place, but it still occurs. Other laptops work normaly with the external harddrive and the HDMI.
View 5 Replies View RelatedI bought DELL Studio 1555 last month.
I immediately noticed after working sometimes the touchpad area,specially the right hand top corner becomes alarmingly hot and I feel burning sensation on my finger tips.
It is the area where WLAN.WPAN,WI-LAN are present.There is also an Intel chipset,perhaps IO controller.
I immediately called DELL technical support and they sent me the DELL engineer.After monitoring the system for sometimes he decided to replace the motherboard,heat sink,fan assembly and thermal pad.
After replacement I am finding the scenario haven't changed and this time along with touchpad the mid area of keyboard is also getting warm.
There is no "dell touchpad" tab in my mouse settings which I could use to enable/disable the touchpad in various ways. I installed the driver below which was given to me on this forum, I'm running windows 7 ultimate 64 bit.
[URL] .....
I have a Dell Studio 1555 laptop. The touch pad is very annoying. How do I disable this device?
View 5 Replies View RelatedTwo finger scrolling now works on the synaptics touchpad of my dv7
I had previously attempted to use modded drivers and other apps (none of which worked), but surprisingly, synaptics seems to have enabled it all by themselves in the latest driver, which is part of scrybe.
More about scrybe: [url]
Guide:
1. Download the ScrybeSetup.exe file from here (you can enter a junk email): [url]
2. Install the software (Make sure it installs both scrybe and the new driver)
2.1 Restart
3. Go to Control Panel>Mouse>Device Settings (Tab)>Highlight Synaptics Touchpad Vx.x> then click settings
4. Once you have the Touchpad settings windows open, you can change all kinds of settings:
Multifinger Gestures>Two Finger Scrolling (Click the gears next to the name)
Multifinger Gestures>Rotating (Click the gears next to the name)......
I just bought new laptop Studio 1555 and eject key never works, now if i need to eject the CD i have to goto my computer right click on CD drive and eject,
i try to connect dell support but no luck, why this eject key not working ? is that a hardware issue or something to do with window 7 ?
it looks like Synaptics has added gesture support for their touchpads with just a software update. [url] The website says the software is backwards compatible with computers purchased in the last year or so. I just got my HDX18t a week ago and can't seem to get it to work.
View 10 Replies View RelatedLatitude E7240 has Touchpad Alps. All works fine except settings "Flick" (Gestures -> Multi Finger Gestures).
This setting works, but after some time (random period) stops working. To fix this I need restart Apoint.exe or go to settings, deselect Flick and select it again.
My laptop's BIOS has latest version A11 and all drivers installed from web site Dell.
Also, I tried to install Windows 8 and Windows 8.1 with touchpad drivers only, but this did not solve problem.
I've had my Studio 1555 for awhile now, and all is has been pretty fine. However, I just noticed that my eject button for the disc drive has stopped working. I rarely use it, but I have used it before.
I upgraded my bios today from A06 to A08 and went to install my new bluetooth mouse, and the eject button just does not respond at all. I can eject the disc from my computer > right clicking the drive and selecting "eject" so it's definitely the button.
I'm not sure if this is related to the bios upgrade or something else.. Computer spec's are in my signature and I'm running Windows 7 Professional, clean install.
Dell Studio not turning on? I've had this happen several times.
On previous times, I would take the battery out for a day or 2, put back in and it would turn on. Unfortunately, this time, no-can-do!