Acer crashes and stripes appear on screen (picture)
i try all. Dismantle notebook and display and check all the cables tucked, reinstal windows (thus eliminating the possibility that this may notebook hardware control)
stripe appear to be in the wound or the movement of the table with display
I got mine XPS m1330 in april.. Didn't like Vista because I felt that I didn't have control over my computer with all that superadmin etc and it being slow.. So I installed XP a couple days ago.. But now I've been used to Vista and didn't like XP, so I switched back to Vista.. Much faster this time around without all of that preinstalled software for now...
Now I have two issues..
First issue is the fan works constantly and sometimes is stops for one second and runs for one second and does that all the time, it is driving me crazy.. By the way, the laptop is not warm at all..
The second issue is that I had to switch SATA HDD in bios to ATA from ACHI(?) and disable something in BIOS which I don't remember the name now before I could change to ATA. Now if I try to enable that "thing" and switch to ACHI from ATA, Vista doesn't boot..
Is it a problem that it is running in ATA or it doen't matter?
Yesterday I flashed my 1737 to the A07 BIOS because DELL says it gets the machine ready for Windows 7.
Flash went perfect, machine works fine. Heres the problem.
the CPU runs very hot now, web surfing checking emails in the 40C to 47C range
when before with the A06 BIOS I only cracked 37C 39C was with lots of video and Gaming.
So I will be emailing DELL to see whats going on, I am very upset about this. Oh and the Fan wont stop running now. and I am at 37C on Core 0 and 33 on Core 1, which is Cool. But the fan does not stop.
I have a HP d103tx notebook that I bought some months ago and was working fine until this one day I installed the Intel® USB 3.0 eXtensible Host Controller Driver from the HP website.After installing that only USB 3.0 port work and not USB 2.0 ports. I tried uninstalling it but no love.. Tried reinstalling it but still no love.. Tried changing the settings to default through BIOS but still..
View 7 Replies View RelatedI use an HP ENVY M6 notebook running Windows 8.1, 64 bit. I was seeing a lot of unwanted popups telling me I needed Java or other add ons which I don't. The computer is less than a month old. I went to that day's downloads and deleted everything I found from that day. Since then, I have no sound. I probably deleted something but I thought I was pretty careful. Can I download a sound card?
View 9 Replies View RelatedI bought HP 2000 Notebook PC -2d49WM with AMD new 10/2013. took out of box a few days ago, updated to Windows 8.1. Have wireless home network and internet working. Cannot play DVD's.
View 1 Replies View RelatedI have a HP 2000 Notebook Running Windows 8. As of last night it was working fine. Since this morning it will not turn back on. I have tried the hard reset with a removed battery. Nothing happened. No lights, no fan, no movement nor sound.
View 3 Replies View RelatedBluetooth doesn't work on my notebook. I have an Envy 15-j030eb which includes Bluetooth. I'm running Windows 8.1 Pro. Notebook product number is E4N79EA
In the device manager, I don't see Bluetooth, but there is one unknown device for which there is no driver installed, I assume this is the Bluetooth.
The HP Support Assistant couldn't locate the driver, so I tried to install the MediaTec/Ralink driver (as my WiFi adapter is from MediaTec/Ralink, I assumed the Bluetooth is from the same manufacturer). This is the driver I tried to install: [URL] ....
I tried to install the driver, the installer runs but ends without any confirmation that it was completed.
My 6920G:
T7500 2.2G
9500M GS[Dox Optimised 185.20: Performance]
3GB DDR2
Quote:
YOU CAN IGNORE THIS PART
I tried many ways to find out why i feel stutte while i play a game.
like changing graphics drivers, undervolting, overclocking, downclocking, and so on, nothing works for me at all.
Anyway, I finally find out its the problem with Intel SpeedStep, and i was looking for a way to disable it, but i found nothing.
Then I tried change settings from software, one day i finally find out a way to stop the downclocking while gaming, and i wanna share it to your guyz because we love this laptop.
You will just need to install the RightMark CPU Clock Utility v2.35 or above version to do this instruction.
before you start your game, you need to make sure that your CPU is running on maximum speed by using Acer ePower Management, also make sure the RM CPU Clock is minimized to system tray..................................
our Dell 9300 has these stripes since 6 month. I guess it is the Ram on the X300
but i although have read this could be an issue of the LCD.
Who has experiences and can tell me?
Hope you can recognize it on the pics.
Btw, i mean the vertical thin coloured stripes on the right side of screen. Others are reflexions from cam.
has anyone come across a problem with their full stop/forward arrow button, mine seems not to work, i am assuming it is a fault on the keyboard, can this be easilly rectified without returning to base as i need the beast every day.
View 6 Replies View RelatedI have an Acer 5100, and my Keyboard, and Mouse stop working.
View 4 Replies View RelatedThe operating system is loaded, and the computer (XPS M1330, Service Tag 7GQ814J) monitor glows white. Then appear on the screen gray vertical stripes. Until this fault computer worked with green vertical stripes on the screen.
View 3 Replies View Relatedi have a Dell XPS M1530 laptop its 3 years old it used to show white screen on start up which soon converts into grey and sometimes colored stripes and than it eventually stops on a white screen with a thick black vertical stripe in the center and finally changes to black sometimes i car hear the start up tone of windows and even i can presumably browse the files and open them too again i can hear the sound but could not be able to see anything.
View 3 Replies View RelatedAcer: Full model: E1-522-65208G1TMnkkI just bought this 'fully' loaded notebook with 8 GB RAM, 1 TB Disk and an AMD 6 in Switzerland. However, using it is no pleasure as it just blows air from and makes CONSTANT fan noise. The device, bottom does not get hot though.What do I do - Bios update? Windows 8.1 ?
View 5 Replies View RelatedBasically I start the laptop up, then the very first screen that appears is a black screen which then proceeds to show these coloured stripes before changing to a white screen which then shows more stripes.
The laptop doesnt progress to the startup or anything and I cant access safemode or anything.
Recently after my computer screen crashed: my screen froze and all over the screen green stripes were visible. After a forced shutdown and restart, my computer screen started up with the screen flickering red-green-blue-white-black all over again.
To see if it had anything to do with my LCD I connected my laptop to an external screen. (I'm currently writing this on my TV-screen with input from my laptop, but all over the screen there are vertical green bars, 5 of them) If I set my resolution lower, the screen bars seem to spread out over the screen as if my screen was woven together with green cloth. I have tried another input with a different cable(DVI) but the same problem occurs.
Atfirst I thought it could be a virus, as I wasn’t really doing anything heavy for my CPU. Since my computer wasn’t really able to start up, I thought I couldas well just install Windows 8. I deleted everything in the process. After this I’ve installed every driver necessary (Windows 8 does this automatically for the base drivers I think). Both my graphics card run the latest Nvidia Driver,downloaded from their site. Only one stopped working(image) Also my PCI device says it has no drivers. Only there are no drivers downloadable from Dell that are compatible with Windows 8.
Main question: What causes the problem described? Is something repairable or do I have to buy new things?
The last 2 days I have wasted my time trying to fix my laptop. I have tried many things en read many advices all over the internet, but unfortunately every post is a little outdated and not similar to mine.
So recently after my computer screen crashed: my screen froze and all over the screen green stripes were visible. After a forced shutdown and restart, my computer screen started up with the screen flickering red-green-blue-white-black all over again. To see if it had anything to do with my LCD
I connected my laptop to an external screen. (I'm currently writing this on my TV-screen with input from my laptop, but all over the screen there are vertical green bars, 5 of them. If I set my resolution lower, the screen bars seem to spread out over the screen as if my screen was weaven together with green cloth. I have tried another input with a different cable(DVI), but the same problem occurs.
I have attached the images in which the error message is shown. For my graphics card I have installed the latest Nvidia drivers available. It might also be a problem that my graphic cards aren't used for the output of my display.
The drivers for the PCI device on Dell are outdated and not compatible with windows 8, which I run my computer with now.
I just bought an ACER E5-771G-54N6 and after 2 days my touchpad just stop working (Win 8.1 , 64-bit). This is obviously a software (driver) issue, and after researching and finding out that a Windows reisntall is the only solution, I find that hard to believe that this can't be fixed through a patch. These type of problems shouldn't be occurring on brand new laptops.
View 3 Replies View RelatedWhen I try to turn it on I'll just get a black screen. The fan will start but will stop eventually. When I try to hard reset it it won't turn off the fan will just start again. I have to plug out the AC so I can be able to power it again. And also last thing I remember is that the clock is not always on sync whenever I start it.
View 9 Replies View RelatedRear camera is putting a stripe in pictures.
Works fine for video, preview of still photos perfect.Take the picture and as the photos "swooshes" to the left, you see that the saved image has a stripe about a third of the way up. For some reason, the saved image is copying the bottom 5% or so of the image, and "pasting" that slightly offset into the bottom third of the photo.
Taking a PrtSc copies a perfct image into the clipboard, (includes camera icons).
Changing image aspect, disablig Camera Plus does nothing.
At least three other people posted on a Microsoft page about this, seems to have arrived with 8.1 upgrade.
Tried uninstalling and reinstalling both drivers, no joy?
On may 2014 i bought a lenovo thinkpad t440p from amazon. Recently the screen make some white stripes if you press lightly on the borders or if you move the screen.
I dont know how to proceed to check it ( the computer is still on warranty from lenovo )... Also the computer showed me a warning message on harddisk SMART short self test when i run the hardware test.
I am trying to find a solution to repair a Vista (Home?) installation on an Aspire 5920. The laptop blue screens with a Stop error code 00000F4 when booted in either Normal and Safe Mode. This problem started after installing a program although it may also have a malware/virus problem. The inbuilt Startup Repair and System Restore both fail.
I have the Acer Recovery disks but the Acer eRecovery website suggests that all personal data will be lost if they are used. Is it possible to repair the OS installation from the recovery disks instead of reinstalling it?
I have an Inspiron 7010 which is 2 years old. In control panel devices it tells me to troubleshoot the laptop and cannot rectify problem with Broadcom virtual wireless adaptor. Secondly running the diagnostics say the Read test is not running. These are the only problems but are not affecting the efficiency of the PC. Should I ignore it?
View 1 Replies View RelatedI successfully upgrade an old laptop so that it will run well and not be too costly to upgrade either? So slow at present....
Laptop is:
acer travelmate 4502WLMi running xpsp3
Was thinking that probably the only upgrades worth considering were ram and hdd.
If this is the case what size mem and spec will work?
If the hdd is worth upgrading do I go for internal or external? and what size ?
This is a new laptop. Finally got Gparted running
I need to have my hand held for a bit.
I want to enlarge the C drive and divide the D drive up as follows:
C drive 70 to 97 GB
D 69.5 to 30 GB
Plus E, F, and G of 4 GB each.
Do I delete the current D drive first and then enlarge C?
This uis Gparted LiveCD V0.4.4-1.ISO downloaded from SourceForge
I was wondering if it was possible. Are most of the drivers available for xp? If so, can you direct me to some links?
View 15 Replies View RelatedI put on cpu-z ( I got the crappy ram like some of the others) but what I thought was odd that it said FSB was 800 and multiplier was 8 and indicated my CPU was running at 1.6Ghz. Is this an error on CPU-z?
View 4 Replies View RelatedI have a bit older Acer Extensa 4620Z - quite a while back (probalby 9 months) i had problems with it and it stopped working, couldnt find operating system or hard drive. I finnally decided to buy a new hard drive for it once i found out it was that the hard drive had died. I got my new seagate harddrive and installed it - I also order recovery disks from Acer so I could get my system back up and running.
This is where my problem is. I can see the harddrive from bios and at first when i tried running the recovery disks it kept saying there was no appropriate partition. I made a bootable copy of a program so I could create partitions on the harddrive. I did this and then tried running the recovery disks. This time it went further and started the recovery process but everytime it gets to D1E4T303.044 in the process (at 47%) - it stops... and sits there a second and then either jumps to 100% and starts over or an error pops up (error: 0xD000001D).
I can not figure out where to go from here - isn't there some way I can use the recovery disks to get my system up and running on the new hard drive?
I've been trying to get Vista Ultimate to run on my laptop for a while now, and every time I install using a clean installation, it runs painfully slow. If i have more than one window open its not even worth using. So I always run back to XP and I'll be honest in saying that I'm quite bored with it.
how to make it run better with Aero?
My Laptop's Specs Are
Brand: Acer Extensa 4220
CPU: Intel Celeron CPU 560 - 2.13GHz
RAM: 1GB DDR2
Graphics: Moblie Intel GMA X3100