Now that the new MBPs have arrived, they come with a new feature called inertial scrolling (like flick-scrolling on the iPhone).
Is this feature specifically hardware dependent or could this feature be implemented into the OS via a application like Bettertouchtools?
Are there any apps out there right now that has this feature?
I have a mighty mouse (the one with the scroll nipple), and for some reason I can only scroll upwards properly, scrolling down does not work or scrolls down slow and jerkily.
View 6 Replies View RelatedMy friend has an XPS m1330 that cannot scroll in certain places. For example, on the program list in the Start Menu, it cannot scroll up or down. It shows the "scrolling" symbol next to the mouse cursor. This same problem occurs in certain games.
All drivers have been installed. Is this just a Synaptics issue?
I can't scroll down with my arrow keys on my laptop. Remember some button popped up last week or so and i absentmindedly clicked yes,
and have no idea what it said, so I think i may have inadvertently typed in some kind of anti scroll code or something like that
I have seen some drivers/hacks/etc for the Synaptics trackpads that allow two finger scrolling and some other multi-touch gestures. Does such a thing exist for the E6400? I'm running Windows 7x64.
View 4 Replies View RelatedI am having a problem with my TravelMate 800.
The mouse and keyboard are involved. When attempting to type (in Word or in a web-browser), the cursor will immediately scroll downdown, and will only stop when pressing the "escape" key. When you start typing again, the problem re-occurs, making typing extremely frustrating. The "page down" key also doesn't work.
When restarting, a blank screen will appear with a blinking "-" cursor at the top of the screen, and the notebook will beep nonstop until you press a key. Windows will then slowly load. It is not a virus problem as I've checked using Norton Antivirus, and removed
spyware.
I believe it's most probably a software problem, and have tried to repair my system, but the recovery CDs didn't work. I got fed up and tried to format the notebook.... at first, the system CD loaded, but wouldn't go anywhere and there was a "not ready reading from drive z: abort, retry or fail" option, and none of the options worked. After attempting to reboot the second time, it would come up to a point saying:
PS/2 device found
EGA/VGA connected
Mouse driver installed
has any1 noticed that virtual scrolling stops working after uve just watched a fullscreen flash video from sites like youtube?
View 8 Replies View RelatedYesterday it prompted me to install a whole crap load of uploads onto my computer.
So after the Nvidia and two others (can't remember them) I was prompted up download a new driver that would solve the problem of the scroll randomly not working.
Well they solved the random part but now it's not scrolling at all.
After some driver updates (Bios and touchpad) scrolling on touchpad stopped working. I also did a reinstall of the drivers.
View 3 Replies View RelatedON MY DV6- 1410EJ NOTEBOOK ON WINDOWS 7 64-BIT, THE SCROLLING FUNCTION OF THE TOUCHPADV6.5 HAS STOPPED AND I CANNOT SELECT THE CHECK BOX TO RESTORE IT.
View 9 Replies View RelatedAnyone know how to enable scrolling on the XP3 1330 touchpad? I just got Vista reinstalled on mine and I cannot find where to enable this
View 7 Replies View RelatedDoes anyone know of any option to enable two-finger trackpad scrolling on the M4400's Alps trackpad under Windows 7?
I've seen the "2 finger" software hack for Synaptic trackpads, but that doesn't apparently work on these Alps trackpads .....
For some reason my CPU usage starts jumping up to around 80% whilst scrolling on wepages, pdfs, etc.
View 3 Replies View RelatedJust got a Vaio Z, which I love in many ways -- except for the trackpad. My old Dell E1505 had a trackpad in which it would scroll more or less based on how quickly you moved your finger up/down the right side of it. So, you could use it to get to the top/bottom of very large documents in a single fast swipe.
Meanwhile, the Z's trackpad only seems to move a fixed number of lines with each swipe. This is a HUGE downgrade, as it takes forever to move through a large document.
Is there any way to get variable-line scrolling working on a Z trackpad?
Is there some trick to this? like 1 in 8 times it actually scrolls, it's not even smoothl, it like jumps, not smoothly scrolls the page.
View 10 Replies View RelatedYes I have scroll & zoom enabled.
I don't know what's up, it just turns off all the time. Then I have to go into the mouse settings and just re-click "apply" and it will be there again (even though it's still enabled).
Dell support is completely useless when I try to chat online with them.
I also have another issue where the top of my windows won't reach the top of my screen. There is a 0.5cm gap between all maximized windows and the top of the screen. It's just an empty space that shows through to my wallpaper. Once again dell support completely useless.
As you can see in my pic, I try to highlight the top of the screen but it just disappears.
Here's another with maximized windows.
I recently got my laptop reformatted due to a BSOD startup loop and when I got it back (the store I bought it from "fixed" it for free), I started it up and noticed that my gestures were missing.
They're kinda hard to live without once you've had them, and it is most unfortunate that I have lost these gestures. So, how do I get them back?
Some Notes: I have an Acer E5-471
My "Mice and other pointing devices" show that I have a PS/2 compatible mouse (I thought they were supposed to have like an ELAN or Synaptics something before the word)....
I tried troubleshooting and it showed me that the 3D Video Controller has no driver and the PCI device doesn't have a driver (I figured I'd include them in case they were the cause of the loss of gestures)....
I have an ACER Aspire R7 win8.1 and I have a problem with the touchscreen. The touchscreen is scrolling up and down by iself out of control, without touching it.
I run anti-virus and anti-malware and everything seems normal. I finally disable the touchscreen in system and everything is fine using the mouse.
I've just bought a refurbished SXPS 1340 from a 3rd party retailer (www.ndc.co.uk). So far I'm very happy with it- yeah, it gets a little hot, but that just means my thighs are kept warm.
My question is to do with the touchpad- I've just downloaded the Synaptics drivers from the Dell support website, and have got the whole "pinch zoom" "look at me, I'm an iPhone" thing going on; however, I'm getting nothing from circular scrolling.
I can't find any reference in the stuff I got with it to say whether the 1340 actually supports this feature, or if I'm just making a mess of it.
I have a Vaio SR 190 and i'm trying to use the Google Code for two finger scrolling. I have a synaptics touchpad v7.0 with Driver 10.2.4
I have Chiralmotion and momentum enabled but the google code program keeps saying "Driver support for multiple fingers is already enabled but the driver still doesn't report multiple fingers
I recently had to get a new hard drive for my laptop which is an Inspiron N5010 with Windows 7 and since I have gotten it back my touchpad scrolling no longer works like it did before and I cant find the setting to fix this issue.
View 3 Replies View RelatedI have a user with a 68855TU. Using Windows 7 64 bit.
When running dual screens and connecting to the Terminal server with Dual screen, dragging the mouse cursor to the top of the laptop screen the image on both screens will move a couple of inches.
Solutions tried so far:
-Tried lowering resolution of the screens on the client side. Issue still happened.
-Checked the driver driver. Going through Screen Resolution -> Advanced Settings, under one of the tabs there was a check box for "auto scroll function". Tried with and without this checkmark with no change. Left it off, the way I found it.
-In the RDP software, checked the "Use all my monitors for the remote session" (It was off, but all screens seemed to be getting used). Scrolling still happened. Turned this off. Only only monitor got the connection, and no scrolling.
-Also tried changing the display config down a step in the RDP connection. Given the laptop screen size and no scrolling happened with that setup.
-Tried using only laptop screen. No Scrolling.
-Tried using only the external screen. No scrolling.
-Used the Lenovo software to check for driver updates. None found.
-Downloaded the latest driver from Lenovo. Driver from April this year. Updated the computer. Reboot. Scrolling still happens.
-Tried to install the latest Intel drivers for the video chipset. Get the message that it has not yet been approved for use by manufacturer.
I just bought a lenovo z50-70.. Its using Elan pointing device, the scroll is two finger scroll..however, i need the same one I am used to before in my other laptop.. if you swipe up or down one finger on the right side of the touch pad, it scrolls..
however, i cant see this option in Elan Pointing devices manager..
Touch pad scrolling not working in windows 7 in my lap hp g6-1325ee
View 9 Replies View RelatedI have an HP Pavilion 14-b130sa, running windows 8. Last night I switched my laptop off after using it all day for writing an essay, when I then turned the laptop back on about 3 hours later, I could no longer scroll using the touchpad. My laptop won't let me run or look at the synaptics 7.5 drivers or any of the files, as it just says they cannot be found.
I have tried re-installing the drivers, but this does not seemed to have worked.
I have bought g500 and configured the mouse settings following a post for the same problem in the forum.
It was working for the first time, but after i used external mouse , then it is not working anymore. It is not handy to always take mouse with me.
(This is the screenshot for touchpad configuration on my laptop)
Link to image
How can you do it? I find 'natural' scrolling extremely irritating.
View 9 Replies View RelatedI recently bought an Inspiron 1545 and absolutely cannot stand not being able to 2-finger scroll. The "side pad" function works poorly at best, and is so undependable that I am resorted to using a mouse whenever possible.
How on earth can I get my Inspiron 1545 with an Alps touchpad to have 2 finger scrolling similar to Mac systems? Is it even possible?
I have dell Inspiron N5110. From past few days, it is auto scrolling to bottom of the page. Even if I try to scroll up its taking me down.
This problem exists even outside OS. I mean I have multiple OS installed on the system. After boot when OS selection windows opens, its always selecting last OS present in the list. System always makes some sound when this option is selected.
Regarding the keyboard. I have installed new keyboard last year under warranty.
I have a problem with my TouchPad , the scrolling of right side has been stopped working ... I've installed all drivers that belong to touchpad , but it doesn't work as well as before , mean it doesn't work even ( the right side ) , i just can use my tow fingers for scrolling, but the right side was so much better ..
View 2 Replies View Related