Dell :: All Black Studio 17?
Feb 12, 2009On the Canadian dell site there is a picture of an all black Studio (15 or 17??)
http://www1.ca.dell.com/content/prod...n&s=dhs&~ck=mn
What options to i need to select to get this set up
On the Canadian dell site there is a picture of an all black Studio (15 or 17??)
http://www1.ca.dell.com/content/prod...n&s=dhs&~ck=mn
What options to i need to select to get this set up
I have a Studio 1558 laptop running Windows 7. Recently, when I open an application (ex. Microsoft Word, McAfee, Excel), the screen fades to black, stays black for 2-3 seconds, then pops back up. It has happened at a few other times too, but I don't recall the specific circumstances. The laptop is 2 1/2 years old, unfortunately out of warranty ....
View 3 Replies View RelatedWhich color do you prefer?
White
(OR)
Black
(OR)
Red
I have just added Red for those who were demanding it and I wouldn't mind the Red now as well
I'm pretty sure I'm going to order this week...but I can't decide if I should get the black or the red.
View 7 Replies View RelatedI have a question about the new dell studio 15 in Black chainlink color.
I want to know if the design is also inside the laptop like the the chains near the palm rest, im hoping not! or is that design only on older studio 15's like 1555 or 1557 .....
Looking on Dell outlet and noticed that color scheme. I was wondering how it looks since I was planning on a Jet Black, but the Graphite Grey sounds nice too
View 9 Replies View RelatedWhen I switch on my laptop, I can hear the noise as if it is running however, cannot see anything. I know it isn't the screen and have a feeling it is the motherboard /graphics card (I use a lot of 3D/graphics software). I want it to last me at least another 6-8 months before purchasing a new laptop.
View 3 Replies View RelatedI was so looking forward to buying a Dell Studio 1555 in a Jet Black Colour with Matte Finish.
But only the Black Chainlink is available. I personally think that the Black Chainlink is UGLY. I think im gonna cry...
I’ve got a Del Studio 1753 laptop and I use it with a separate LG flatron w2486L screen. The cable recently came out of the VGA port and when I plugged it back in there is now a black strip at each side of the screen and the image doesn’t go across the full width any more. In display settings I’ve got the monitor set at the highest resolution possible, 1440x900, but this makes no difference (I’m on Windows 7).
View 7 Replies View RelatedI was using my Studio 1537 when it suddenly shut down. I rebooted and the console media lights lit up and it sounded like it was restarting as normal but the screen remained black. I have tried a number of internet: restarting holding F12, restarting holding Fn+F8, removing battery and AC power & holding power key for 30 seconds - 1 minute and then restarting and also holding D while restarting to run screen diagnostics. I can see the coloured screens flash through but none of these ideas have restarted the monitor it remains black.
View 5 Replies View RelatedI got the "ATI display driver has stopped responding and has recovered from an error" several times over the last couple of days where my screen would freeze for a couple of second and then start working again and would display that message. I thought little of it as it did always seem to work afterwards.
Last night however it got extremely frequent happening at least once a minute and i decided to try and restart my computer to see if that would work. Now when I try to turn the computer on the screen stays black and will not do anything. I can hear that the computer trying to work as the fans are going and the power light is on, it's just the screen that isn't working.
[URL] ...
I found these guides on how to fix the error message but at the moment both are no good as I can't even use my computer to fix the problem as the screen won't work.
I am pretty sure the reason my computer is doing this is because of outdated drivers as I recently did a fresh install of windows and only installed the drivers that came on the CD I was given with my computer. I should have downloaded the latest drivers online.
I am running Windows 7 on a Dell Studio 1558 laptop. I am unsure of the graphics card at the moment as I can't access the computer but I know that it is an ATI of some sort.
I have had my Dell studio xps 1640 for around 2 years now, apart from the common overheating problems has been working fine.
Last night i powered down as usual after watching some live stream football, this morning went to start up again and the keyboard lights up & can hear the fan running but getting completely blank, black screen. It seems windows isn't loading up either as if i push the power button again it shuts down instantly.
I have always kept the inside clean and free of dust and really need to know what may need repairing. Could it be a Graphic or video card or Motherboard problem.
I have also tried the usual checks of memory but have not tried to get display via vgi or hdmi in to another monitor.
I got my laptop three or four years ago and today the screen just stopped working. First it faded white, then it came back on but faded black/white and now is not working at all. It stays black through startup and when it reaches the login page it is just a bunch of vertical lines.
View 2 Replies View RelatedMy studio 1555 plays 6 beeps and shows a black screen wen i turn it on.
when it was working i was having a few problems with the video card as i kept getting a blue screen saying about it being faulty but i had ignored it and now the laptop wont work at all.
I have read on the internet and it sounds like the video card is built into the motherboard.
how do i find out which motherboard will fit in to replace and will it have the video card inside.
I have a big problem with my dell studio 1457 latptop... It's starts smoothly, run through BIOS and stops with black screen and UNREGISTERED EXCEPTION HANDLER information. I can not boot from any device [checked cd, usb key, hd, even floppy drive](BIOS seeing HD and DVD drive, in boot menu [f12] I can see usb key and floppy too]It's checking all devices at the start, but looks like loosing ability to connect with any of them after whole BIOS sequence is done. Therefore I can't flash BIOS or will I have to replace B chip?
View 6 Replies View RelatedMy studio 1555 is not starting. When I press it, power button goes white, I can hear the HDD spinning but no beep or error appear. Screen remains black.
When I press the power button again it's turn off.
I've already tryed to take out battery and press power bottom for 30 seconds but nothing happens.
I just got a brand new customized Sony VGN-Z890FKB. The sales representative of the website where I bought it from, states all their models come with the Premium Carbon Fibre lid, however I find it very hard to tell the difference between the two.
Nowhere it is indicated that this one has the carbon fibre lid. On the side of the box it says B (Black) so I got confused.
The lid is black indeed, if I look close enough I see small silverish specs mixed with the black, even on the bottom side of the laptop. The palmrest/keyboard area is a darker black without silverish specs in it.
A friend of mine has a Sony SZ and there you can tell it is a black Carbon Fibre lid (black with a hint of purple in it - when you angle the laptop from one light source to the other + you somewhat see horizontal lines on the lid of the Sony SZ).
Also if you look carefully on the sonystyle site, you see those same horizontal-like lines on the Carbon Fibre Black lid of the Sony Z contrary to the Black plastic lid.
How can one tell whether his Sony laptop has a carbon fibre or black plastic lid?
My VGN-S1XP has today developed two unusual black spots on the screen, one I found this afternoon, and the other has only appeared within the last few hours.
But these are NOT dead pixels, the pixels are functioning correctly, and when viewed from different angles this is obvious.
The marks appear to be behind the pixels, at first when there was just one I wondered if an insect had found it's way in there. The other spot however, is decidedly not insect shaped
difference between premium black carbon and regular black for fiber carbon
View 3 Replies View RelatedI bought the 14z in black chainlink yesterday, and I was reading about how "magnetic" it was towards fingerprints, and also how the colored versions could be "that" much better.
Is it a different material or is it just how much the fingerprints show?
Looking at ordering a Studio 1557 and I'm hoping someone can confirm that the standard 'chainlink black' finish is shiny piano black?
Also do people find it scratches very easily?
I'm looking for a glossy, bright, rich color screen that has really, really deep blacks. There were some comments in the RGBLED settings thread that the blacks don't get very black on this screen. Is that true?
Would a white LED screen have better blacks? I don't care about photo work, I just want the best looking screen for games and movies.
I bought this in 2005 and used it since then. One day I left it on and went away for couple minutes and the screen turned black when I came back.
I thought it was in hibernation but after restarting, the screen is still black. I can connect to my LCD TV via VGA cablle and see it fine.
If I turn off all the lights and shine a flashlight into it, I can see the desktop with all icons on it in super dark background.
I don't smell anything burning. So my question is what's really wrong with it? My guess is either the blacklight or the inverter
How black is your RGBLED screen? If you look at the black screen (say, black desktop background) in a completely dark room, is the screen uniformly black? Mine has some slightly brighter "shadows" (well, it's actually the opposite of a shadow) towards the middle of the screen. Granted, this is a tough test for a laptop LCD, but for that kind of money I would have expected more. My M90 certainly does better in that regard, but I do seem to recall that the screen on that laptop had a similar issue, and did improve over time.
So, is what I am seeing normal, or should I get them to give me a new LCD?
3 different Latitude D810's that we wanted to add some life to. So we purchased 3 SSD drives,
two 64GB IDE/ATA Transcend MLC based units and 1 RiData 16GB SLC IDE/ATAunit. (Yes, the SLC is far faster with writing than the MLC drives).
Using our standard image, everything works fine. Except when removing the power cord from the back of the unit, it goes to a black screen, any hard drive (SSD drive) activity ceases.
When doing the same thing with a traditional hard drive, the screens blip black for a brief moment, but the computer keeps running as expected.
Does anyone have any idea if these "high" prices right now will dip before Black Friday? I did online chat with a rep but they refused to lower any prices this way.
View 3 Replies View RelatedI have a three year old E1705 and after several minutes using it the screen flickers a tad bit then goes black.
I can shut if off but it will not go back to normal until it wants to. Sometimes this is a half hour or sometimes several hours almost as if it is to hot but the CPU temp is normaly 45 C to 50 C.
i bought it from a friend who said the display had stopped working so first off i plugged it into an external moniter and it worked great so thought graphics card is ok must be lcd or inverter bought an inverter still no good figured lcd so i purchased a new one plugged it all up no good last thing i tried an lcd ribbon and its still not doing anything its beating me up now what else could it be
View 9 Replies View RelatedFinally, I've ordered my very own 1555 today
I've spent all my budget on upgrades so I've left the colour in standard black chainlink. Been googling for some photos,
I actually love the glossy black lit with the little chainlink patterns on. But what I don't like, in fact, REALLY don't like, is the fact that they've added the pattern in GREY on the palmrest inside?!
http://www.flickr.com/photos/dellphotos/3461989724/
2 days ago, when starting my computer (Windows logo after POST), my screen suddenly went black. After 20 seconds it changed to my external screen as normal. This made me suspicious as my screen usually goes black only for 2-3 seconds during startup.
After startup I tried changing back to the internal WUXGA screen on the laptop by pressing FN+F8.
What happened then was that from the left side of the laptop, I heard this weird high-frequency scratching sound. The screen went on for a fraction of a second ( I could see the desktop ) but then it instantly went black again.
What can be causing this?
I installed the WUXGA screen myself about half a year ago. Can this be caused by loose cable connection or something like that?