Dell :: Code Error 20000212 (CMOS Failed The Pattern Test) On Studio 1555
Feb 9, 2010
I ran de PSA diagnostics on my Studio 1555 and I got the error 2000 - 0212 (CMOS failed the pattern test). I changed the CMOS setting to default, ran the test again, and I got the same error.
Called Dell tech support, they told me that they are going to replace my board. My original problem is that Win7 is taking more than normal to start (2 - 3 minutes to be ready).
I got an Intel C2D P8700, 4GB RAM DDR2 800MHz, ATI Radeon 4570HD 512mb, 250GB Samsung HD 5400RPM. It should start fast, since the HD has no fragments, the win reg is ok and I have not crappy services or programs at startup. Does any1 know what is this error about?
I'm currently using my laptop for 2 months and today when I shut down my Dell Inspiron 15 a while ago and open it again after an hour I continuously get this error
Your PC ran into Problem and it needs to restart. We're just collecting some error info, and then we'll restart for you. If you'd like to know more you can search online later for this error. 0xc000021a
After it automatically restart it says: RECOVERY .... Your PC couldn't start properly
After multiple tries, the operating system on your pc failed to start, so it needs to be repaired Error code: 0xc0000001
You'll need to use the recovery tools on your installation media. If you don't have an installation media (like a disc or USB devices), contact your system administrator or PC manufacturer.
My T500 was slammed very hard one day, once I reboot, it worked for half hour and gave up. I tested it via BIOS, it gave me error code 0000 read verification failed.
I presumed the HD is dead, inserted a healthy one inside and works fine for a couple of hours and gave up again, tested through BIOS gave me the same error code.
As my Studio 1557 kept giving blue screen, I decided to run diagnostics. When both rams were installed I got 2000.0123 Memory integrity test failed. Then I uninstalled one, i got same error.I tried the one i just uninstalled on same slot, i got same error.And then i tried them both on the other slot, i didn't have any errors.
The thing is, fan has been changed 2 times, and mainboard has been changed before. I've been using this notebook with an acceptable Thermaltake cooler from the day I have bought it. What makes this notebook like that? 7200rpm HDD? i7 processor?
I bought my Studio 1555 laptop about 4 years ago. Recently it has been showing issues of automatic restarts and no booting. Initially the laptop was overheating and fan was running at very high speeds, so I figured it was a cooling issue - so cleaned up the area near the fan and put everything back in carefully. So now that problem is solved, but NO display issue still remains. The laptop power light switches ON, but I don't see any display in the monitor - so I ran the LCD BIST test - and turns out the LCD works just fine. I identified that the items below could be the issues. What I can do to rectify this issue. The system is out of warranty.
1. Connect to an external monitor - but this test would be redundant because we already know that the display is fine with the LCD BIST test.
2. Replace the video card or memory module
3. Replace the motherboard.
I read somewhere that taking out the BIOS battery and putting it back again solved the issue - but I can't understand the reason behind it.
I bought the machine t430 thinkpad three months in the United States.
Currently the program to check the hard drive by LSC, the error message is: Targeted read test Failed
Diagnostics SMART status test Passed Targeted read test Failed Random seek test Passed Funnel seek test Passed SMART short self-test Passed SMART drive self-test Passed
The time machine is still time 8 months warranty. Hitachi Hard Drive 500 GB 7200 rpm / min
Is it due to the speed that new hard drive used for 3 months has been corrupted? In case of warranty, Lenovo does not provide a Windows license again, right?
The parameters of the hard drive Hitachi-HITACHIHTS725050A7E630-TF1500Y9HK360B Result code: WHD01V002-UI7X0H
I have Dell Studio 1558 laptop, when i switch ON it is not booting.. i can hear the sound of fan & the Drive but i cant see anything on the screen, sometimes it will boot up but it will work for only 10 mins then the screen will go off & will never come ON again.
When i ran the Diagnostics by pressing F12 during startup i got an error message
HP battery alert system detected battery capacity to be very low error 601 (internal battery). So I changed the cell to a new CR 2032 battery. Showed the same error. I changed to another new CR2032 battery. The second time I did this I had a new 502 CMOS error along with the 601 error. My clock reverted back to 2009, I lost some of the icons on the lower right, and my wireless internet disappeared.
Now I have two things that need to be fixed.
I turned on, immediately hti ESC, hit system diag. F2, Battery Test: Battery Test Primary FAILED (on the first battery I put in, didn't check on the second)
Control - Device Mgr. - HP - Batteries - Microsoft AC Adapter, Microsoft ACPI Compliant Control Method Battery, and Microsoft Composit Battery all show that they work.
System CMOS/realtime clock says its working.
Microsoft System Mgmt. - BIOS Driver v. 6.1.7601.17514 from 6/21/2006 says it's the latest version.
I've manually updated my clock. I'll figure out the wireless and icons later I guess. Just need to know what to do about the errors.
I have a DELL Studio 1555 with Windows 7 32 bit Professional OS .It's been pretty great.Only problem is that today I clicked on my webcam as I wanted to use it,and it gives me the above error message.I have NO clue what to do. I really wanna use Skype.
I tried to see the webcam driver updates but i cant find any on the website for the Windows 7 32 bit version .I also reinstalled my OS but the problem remained the same.
My studio 1555 is not starting. When I press it, power button goes white, I can hear the HDD spinning but no beep or error appear. Screen remains black.
When I press the power button again it's turn off.
I've already tryed to take out battery and press power bottom for 30 seconds but nothing happens.
I recently got my fingerprint reader replaced, and to do this, they had to give me a whole new palm rest, but I just noticed, the new one doesn't have the topo pattern, which I liked. Is this normal? The touchpad is also different, not the same texture, which I preferred.
I have a hp pavilion g7, operating with windows 7As of this evening, my laptop is failing to start up and freezes on the 'starting up' page display. After doing several of the recommended options, I ran the start up test which has failed.
The display screen reads-Memory test: passedSmart check: passedShort dst: failedFailure id: GU6E00-63479L-MFPX01-60TP03Product id: A7A44UANBAHard disk 1Start up test: failed
just got my Studio's palm rest replaced today since the touchpad freaked out after I accidentally spilled water on it, thank God for complete warranty.
However, the replacement palm rest seems to have the pattern on which came with my old Studio, the graphite pattern. Here are some before and after pics, and some pics showing what happens when the media panel does the all buttons stay lit glitch.
This an example of the later palm rests. However, I had this on my Studio before the palm rest change because I received a replacement which had the newer palm rest. So, this is the before picture .....
The dell support center PC Check showed my hard drive funnel seek test failed. Before I ran the PC check, the laptop flashed and shutdown. I restarted in safe mode and backed up all of my files, shut down the laptop again and restarted.
I am currently rebooting the laptop, and have inserted the Dell Diagnostics and utilities CD and testing my hard drive. the following error code keeps occurring..No additional sense information
Test Results: Fail Error Code: 0F00:1332 Msg: DISK - Block 4507 : Interrupt Request (IRQ) did not set in time
The same message also occurred with the following Block Numbers, with the same error code:
I recently ran a test on my laptop(N4050).It first showed me I had a SMART extended self test failure. Then I had a hardware failure message. I have attached one of the things.May I know what am I supposed to do? My warranty has expired.
I have a dell inspiron 1750, and the past couple of weeks, i have been having intermittent screen problems, it occurs when i shut the computer down and then restart it, sometimes it works, sometimes i get a bit of light off the screen but its just blank (black), i know everything works because when the windows 7 start up screen comes on, i can hear the sound and can enter my password (even though i have a blank/black screen), i did a diagnostic test and the lcd test failed, i got the error code:
Error code 0321 Msg: Error code 2000-0321 Msg: LCD EDID - Unable to access the EDID EEPROM
I just moved he screen, and it goes different colours and pixels go out of place, i think it might be a loose/bad connection on the right hinge where the laptop joins the screen?
My HP Pavilion G6 laptop fails to load Windows. The HP UEFI diagnostics for hard disk failed the Short DST test with failure code GU754F-6PK7GW-MFPWXG-60TQ03. Does this mean I have to replace my hard drive? My laptop's product ID is E3D62EA#ABU and I have Win8.1 64-BIT installed on it.
After putting the power on, nothing happen. It gives some kind of blue background. But it's not the critical error blue screen. It's some kind of windows-bitmap.
Using Esc and F2 I could do a System Test. The Short DST (don't know what that means...) says: FAILED.....
It gives details on the FAILURE ID : 64SP28-5HB7AC-XD003F-60VF03.... What should I do next?
The notebook is a HP, model DV6-3160SD, Running W7 on it. Don't know the bit-version (and can not check it).....
My laptop HP Pavilion dv6-6c35dx fails to load Windows. I ran diagnostics and got a quick (303) error. The HP UEFI diagnostics for hard disk failed the Short DST test with failure code MBX47F 0006QU PXGK01 60QT03. Does this mean I have to replace my hard drive? My laptop's product ID is A6Y53UAR#ABA and I have Win7 -64 installed on it.
My HP elitebook 8540p has been serving me well for years but recently it shows a bluescreen and resets after entering the windows password.
Diagnostics when starting up say:
Memory Test: Failed Failure ID : UOEDUC-56C77E-XD7U3G-40N603 Product ID : WTO38ES#ABH Memory Module 2 Bottom-Slot 1 (right)
This means the memory card underneath the keyboard should be replaced, correct? I am confused by the message saying "Module 2 Bottom-Slot 1 (right)", I see only one card... If so, what is the best way to acquire a new memory card (Primary memory board)?
where my laptop would shutdown randomly and give me a real time clock error. I googled around and found that replacing the cmos battery would fix the problem. I tried it out but still i am getting this problem.
I have a Pavilion dv7 1245dx with Windows Vista 64 Bit bought 2009 at Best Buy. It slid off the arm of the couch onto a carpeted floor while shut down. Next day started ok, got into yahoo, facebook, then kind of froze up. Eventually, would not do anything, manually shut it down, started it back up. Black screen, 'No Bootable Device-Insert Boot Disc And Press Any Key'. It will not accept recovery discs that I made after purchase. Start up test ok, memory test ok, hard disk failed 'Boot Drive Not Found'. Caps lock light is blinking. I saw something in a forum about resetting or reseating the hard drive but no explanantion how to do it.
I haven't noticed any issues with my PC, but the scan reported this today on device Seagate-ST9500420AS-5VJEW3V. what this error means, what device it's referring to, and a recommended course of action?