in February 2013, I bought 2 Inspiron R17-5720 in Amazon. Now, in both laptops, it is impossible to boot the machine.
When I power on, appears the Dell logo and nothing more.
I run the CD Utilities and I got the following message:
Error code 4C00:0320
MSG:SYSTEM:CMOS failed the pattern test.
I ran de PSA diagnostics on my Studio 1555 and I got the error 2000 - 0212 (CMOS failed the pattern test). I changed the CMOS setting to default, ran the test again, and I got the same error.
Called Dell tech support, they told me that they are going to replace my board. My original problem is that Win7 is taking more than normal to start (2 - 3 minutes to be ready).
I got an Intel C2D P8700, 4GB RAM DDR2 800MHz, ATI Radeon 4570HD 512mb, 250GB Samsung HD 5400RPM. It should start fast, since the HD has no fragments, the win reg is ok and I have not crappy services or programs at startup. Does any1 know what is this error about?
I have a Dell N5050 which has the following erros on it:
Targeted Read Test, Error Alert Icon Failed,Critical Alert and SMART Short Self Test,Error Alert Icon Failed,Critical Alert.
What i can do to sort this problem out?
I have a Pavilion dv7 1245dx with Windows Vista 64 Bit bought 2009 at Best Buy. It slid off the arm of the couch onto a carpeted floor while shut down. Next day started ok, got into yahoo, facebook, then kind of froze up. Eventually, would not do anything, manually shut it down, started it back up. Black screen, 'No Bootable Device-Insert Boot Disc And Press Any Key'. It will not accept recovery discs that I made after purchase. Start up test ok, memory test ok, hard disk failed 'Boot Drive Not Found'. Caps lock light is blinking. I saw something in a forum about resetting or reseating the hard drive but no explanantion how to do it.
View 9 Replies View RelatedI own a dell inspiron n5110 laptop.It is 1 year 1 month old and out of warranty.
I Recently had a hardware pc check up as my system was booting slow.unfortunately i got a error as Smart Short Self test Failed error code whd16-ze6.
I bought the machine t430 thinkpad three months in the United States.
Currently the program to check the hard drive by LSC, the error message is: Targeted read test Failed
Diagnostics
SMART status test Passed
Targeted read test Failed
Random seek test Passed
Funnel seek test Passed
SMART short self-test Passed
SMART drive self-test Passed
The time machine is still time 8 months warranty. Hitachi Hard Drive 500 GB 7200 rpm / min
Is it due to the speed that new hard drive used for 3 months has been corrupted? In case of warranty, Lenovo does not provide a Windows license again, right?
The parameters of the hard drive
Hitachi-HITACHIHTS725050A7E630-TF1500Y9HK360B
Result code: WHD01V002-UI7X0H
I have Dell Inspiron 1564
The dell support center PC Check showed my hard drive funnel seek test failed. Before I ran the PC check, the laptop flashed and shutdown. I restarted in safe mode and backed up all of my files, shut down the laptop again and restarted.
I am currently rebooting the laptop, and have inserted the Dell Diagnostics and utilities CD and testing my hard drive. the following error code keeps occurring..No additional sense information
Test Results: Fail
Error Code: 0F00:1332
Msg: DISK - Block 4507 : Interrupt Request (IRQ) did not set in time
The same message also occurred with the following Block Numbers, with the same error code:
45077746, 45077826, 45078082, 45078210, 45078338, 45078466, 45078466, 45078594, 45078722, 45078850, 45078978, 45079106, 45079234, 45079490. 45079618, 45080002, 45080130, 45080258
these are the block numbers so far, the test is still running.
I recently ran a test on my laptop(N4050).It first showed me I had a SMART extended self test failure. Then I had a hardware failure message. I have attached one of the things.May I know what am I supposed to do? My warranty has expired.
View 6 Replies View RelatedI have a dell inspiron 1750, and the past couple of weeks, i have been having intermittent screen problems, it occurs when i shut the computer down and then restart it, sometimes it works, sometimes i get a bit of light off the screen but its just blank (black), i know everything works because when the windows 7 start up screen comes on, i can hear the sound and can enter my password (even though i have a blank/black screen), i did a diagnostic test and the lcd test failed, i got the error code:
Error code 0321
Msg: Error code 2000-0321
Msg: LCD EDID - Unable to access the EDID EEPROM
I just moved he screen, and it goes different colours and pixels go out of place, i think it might be a loose/bad connection on the right hinge where the laptop joins the screen?
I have a Dell 5720 and in the summer, its motherboard and keyboard got replaced due to short circuit problems. Since then, every time I press the Power button, the laptop starts to load correctly but suddenly turns off during the boot process. If I press the Power button on a second time, the laptop loads perfectly.
I have Windows 7 and Ubuntu installed and the booting process reaches the grub where I can select in which one I want to boot. I can even select something from the list, but then the laptop turns off (not because I select something, but I think because I have a few seconds before it shuts down). If I turn it on again, everything is fine. I can select anything from the grub's boot list and it won't turn off. It boots into any desired OS and works like there's no problem
I've just run hardware diagnostics and all tests passed.One of my friend said that it has a driver problem because the motherboard got replaced and this is why it's shuts down the first boot.
Another observation: if I do this 'twice turn-on' boot and use my laptop for a while and I turn it off and I turn it on again in a short time after the turn off, it boot correctly.
My two weeks old dell inspiron 17R doesn't boot into the OS (Windows 8).
By hardware diag. passed the test, found nothing.
Dell inspiron N5110 won't boot, when i performed a self test this error appears:
Error Code 2000-0142
Validation 33125
MSG: Hard Drive 0 - S/N **-*******-*****
Self Test unsuccessful. Status = 79
what does this mean?
can i still use the HDD or do i need to buy a new one?
can i still recover my files?
As my Studio 1557 kept giving blue screen, I decided to run diagnostics. When both rams were installed I got 2000.0123 Memory integrity test failed. Then I uninstalled one, i got same error.I tried the one i just uninstalled on same slot, i got same error.And then i tried them both on the other slot, i didn't have any errors.
The thing is, fan has been changed 2 times, and mainboard has been changed before. I've been using this notebook with an acceptable Thermaltake cooler from the day I have bought it. What makes this notebook like that? 7200rpm HDD? i7 processor?
I have a hp pavilion g7, operating with windows 7As of this evening, my laptop is failing to start up and freezes on the 'starting up' page display. After doing several of the recommended options, I ran the start up test which has failed.
The display screen reads-Memory test: passedSmart check: passedShort dst: failedFailure id: GU6E00-63479L-MFPX01-60TP03Product id: A7A44UANBAHard disk 1Start up test: failed
I have the Dell XPS L501x and am now getting a failed message when the SMART Short Self Test is run. The message says:
"Your drive indicates that a failure may be imminent. Backup all important files and replace drive."
The hard drive is SAMSUNG HM640JJ.
A couple of questiions please:
1. I take if that this is a legitimate error message as opposed to some system glitch.
2. If I buy another SAMSUNG HM640JJ drive how can transfer the data from the old to the new.
my dell inspiron laptop model n5030 will not start. when you turn it on the startup repair window comes up. after the diagnostic runs it says windows cannot repair this automatically. my warranty expired this past august and now my laptop died. how do i restore my laptop when the system restore partition does not work? it just says. boot manager failed to find os loader error code 0x3. and it also says boot configuration data store repair failed. error code = 0x2. then the laptop shuts off. what should i do? i have only had the laptop a year and a half. do i need a new one?
View 4 Replies View RelatedMy HP Pavilion G6 laptop fails to load Windows. The HP UEFI diagnostics for hard disk failed the Short DST test with failure code GU754F-6PK7GW-MFPWXG-60TQ03. Does this mean I have to replace my hard drive? My laptop's product ID is E3D62EA#ABU and I have Win8.1 64-BIT installed on it.
View 3 Replies View RelatedAfter putting the power on, nothing happen. It gives some kind of blue background. But it's not the critical error blue screen. It's some kind of windows-bitmap.
Using Esc and F2 I could do a System Test. The Short DST (don't know what that means...) says: FAILED.....
It gives details on the FAILURE ID : 64SP28-5HB7AC-XD003F-60VF03.... What should I do next?
The notebook is a HP, model DV6-3160SD, Running W7 on it. Don't know the bit-version (and can not check it).....
My laptop HP Pavilion dv6-6c35dx fails to load Windows. I ran diagnostics and got a quick (303) error. The HP UEFI diagnostics for hard disk failed the Short DST test with failure code MBX47F 0006QU PXGK01 60QT03. Does this mean I have to replace my hard drive? My laptop's product ID is A6Y53UAR#ABA and I have Win7 -64 installed on it.
View 9 Replies View RelatedMy HP elitebook 8540p has been serving me well for years but recently it shows a bluescreen and resets after entering the windows password.
Diagnostics when starting up say:
Memory Test: Failed
Failure ID : UOEDUC-56C77E-XD7U3G-40N603
Product ID : WTO38ES#ABH
Memory Module 2 Bottom-Slot 1 (right)
This means the memory card underneath the keyboard should be replaced, correct? I am confused by the message saying "Module 2 Bottom-Slot 1 (right)", I see only one card... If so, what is the best way to acquire a new memory card (Primary memory board)?
My Pavilion g6 gave the following message when I ran a start-up test: Hard Disk Short DST: Failed Failure ID: OLM9XO-6AQ766-MFPXOK-60TWO3
View 2 Replies View RelatedMy laptop HP Pavilion g6 2202tx fails to load Window. .
The HP UEFI diagnostics for hard disk failed the Short DST test with failure code RW2LG1-6S9766-MFPX1F-60WX03.
Does this mean I have to replace my hard drive?
My laptop's product ID is C0P15PA#ACJ and I have Win8.1 -64 installed on it.
unable to find any solid information.
Dell M5010
7 beeps on startup - no pattern
Blank screen
Reset Bios battery - Reseated Hard drive and Memory
I haven't noticed any issues with my PC, but the scan reported this today on device Seagate-ST9500420AS-5VJEW3V. what this error means, what device it's referring to, and a recommended course of action?
View 1 Replies View RelatedI have a HP G60-126NR laptop. One day, it was stone cold when I press power button. I discharged the mothboard. I then installed a new CMOS battery . I am using the power adapter to power unit. When I press the power button , I get nothing toally dead, except to show the power connection light. If I remove the CMOS battery, then discharge the motherboard again, then plug in , and the laptop powers up without touching power button, and goes into setup screen to enter time. After entering time , it boots into Windows without issue. Windows SFC scan shows no error. If I shut down, not sleep, the laptop is dead again unless I discharge motherboard and start from square one. Also, I want to say that while Windows is running, if I close the lid to put to sleep, you can see that the screen is still active despite changing "what happens when I close lid". My diagnostics tells me it needs a new motherboard. PS: I did flash the BIOS off of HP Website thinking it would resolve my issue, but it did not ....
View 3 Replies View RelatedMy Ideapoad P500 is approximately 16 months old (so the warranty period is out, obviously!) A couple of nights after a reboot I got the message "Repairing Hard Disk errors. This could take an hour or longer."... or something very similar. The laptop hung up at that message for more than 18 hours.
I did a hard reboot and now get the message "Checking media" followed by the error "Boot failed." This leads to the message, "Default Boot Device Missing or Boot Failed."No I don't have any recovery media.Yes I have pretty recent backups so that is not a problem.I've got an enclosure that I can use to hook my laptop hard drive up to so I can see if the drive is even readable.
Now here is the 64 thousand dollar question... how do I get the hard drive out of the laptop? I have taken the five screws out of the back. At that point, I think the DVD drive should slide out, but it does not.how to get the hard drive out?
I have a y500 Lenovo gaming laptop with Windows 8, and for the past couple of days, each time my laptop is put in hibernation or powered down, whenever I turn it back on it gives me this message:
"Default Boot Device Missing or boot failed Insert recovery media and hit any key Then select boot manager to choose a new boot device to boot or recovery media."
Then it brings me to a page with 3 boot options, and only the Windows Boot Manager works. I'm doing scans and hardware scans but so far nothing is being found. This laptop is less than 2 months old so I really don't think it's a hardware problem, and I haven't downloaded anything recently that may have messed this up. I would contact Lenovo but I'm unsure if this is an issue with the laptop, or Windows 8.
I have a Acer E1 522-3657 computer, which my son set-up for me but did not make the recovery disc(s). The unit is just outside of the warranty period when the hard drive failed. The hard drive just makes a clicking noise and after the logo screen appears it goes to a blue screen with a box that has the following message with in, "Default Boot Device Missing or Boot Failed. Insert recovery Media and Hit any key.....Then Select 'Boot Manager' to choose a new Boot Device or to Boot Recovery Media.
I have installed a brand-new Western Digital 1T Sata3 harddrive to replace the Toshia 750 GB original Drive. After turning the computer on and at the logo screen I press and hold F2, this takes me to the InsydeH20 Setup Utility Screen. I see under the "Information" menu that the installed harddrive model and serial number appear. I see in the "Boot" menu, Boot Mode: "UEFI" and Secure Boot: "Enabled".
Under the "Exit" menu, Exit Saving Changes is highlighted. When I press F10 a "setup Configuration" box appears asking to save configuration changes and exit now? "Yes" is highlighted to which I hit Enter and are returned to the "Default Boot Device.......page. I then hit ecs twice and are at a black screen with the message No bootable device -- Please Restart system_appearing in the upper left corner of the screen. I then push and hold the power button until the computer shuts off.
I have ordered from acer the "Acer E-recovery Media Disc Set", which is specific to the SNID of my computer. I have not attempted to format the new hard drive in any way. I assume the E-recovery Media Disc Set will handle that operation due to the multiple partitions required.
In view of the above situation, do I need to set up the computer in any way before I start to utilize the E-recovery Media Disc set. I assume the Media will be on CD's. The computer was running Win 8.0 which was updated to Win 8.1 and was running very well, very stable.
Acer V5, spilled coffee on keyboard. no problem at first, then lockup, and on restart get the No Boot Device or Boot Failed. Am using my old laptop now. Can I get a download, save it to thumb drive, and use it to restart/reboot my Acer?
View 2 Replies View RelatedI get the error in the Title after i tried to flash the latest BIOS update for the Z510. I can press ok and then get into the boot manager but i cant choose anything there. Also I cant boot from a Disk with e.g. XP on it.
I also tried the Inside BIOS crisis mode (fn+r) with the BIOS file on my USB drive but it doesn't work and tries to access the file on the USB drive but boots normally instead to the error again. (Couldn't try it with removed battery as I have to remove the whole back to remove the battery on the Z510).