It's been running fine for a long time now as in the Sig, but came home from Dinner last night and some wierd things. Tried to open Irfanview and it said it couldn't find the program.
Same with Easycleaner (a Reg etc cleaner). Also, my Software Firewall (Comodo) popped with 3 flags that basically told me it was not working and a re-installation might fix it.
So I rebooted and now everytime I come into windows (even in Safemode) if I select Start-Program Files (or Control Panel) the menu will lock up. Can still Alt-Tab-Del to see processes running, but thats it.
So I tried a restore point to last week, came to my desktop and nothing loaded. No explorer, menus, short cuts, etc at all. (can still alt-tab-del)
I don't know what it is with this laptop and messengers. But NOTHING wants to work. Heres a list of problems
1) AIM wont open (fixed, I had to change port number) So now AIM works on iChat and Adium
2) MSN wont open on the actual application (Mac Messenger) I want to webcam chat with people, and it just WONT start. It starts on adium since I checked the box to use http or something, but I can't webchat on adium.
When I try to open messenger, it says I am not connected to internet, which I clearly am...
I checked my routers firewall. And I am not too sure how to change things on the macs firewall. I just want to use messengers..
if my inspiron 9300 would support 3 or 4 gb of RAM. I know 32-bit windows limits the amount of RAM that is recognized but I'm asking if the actual motherboard and BIOS would recognized 3 or 4 gb of RAM installed.
I've got an old i9300 that is basically unsellable. Apart from the low spec (see sig), it's got a battery that last 15 minutes on a full charge, broken speakers, no internal dvdrw drive and a cpu that runs unusually hot. I think I'd struggle to get $400 for it in its current condition - probably nearer $300 to $350.
Although it's an old machine it still works fine as a nice multimedia (music/movies) machine and for internet stuff so I thought about ways to convert the laptop into a sort of internet jukebox and this is what I came up with.
1st part: Dismantle the screen and flip it round so that when the laptop is closed the screen is on the outside of the machine. I've taken my i9300 apart lots of times before but I haven't checked to see if this is entirely possible. From the outside it looks like it should fit physically but I'm not sure about the length of the internal video cable. It probably could be extended if necessary though.
2nd part: Install OSX86 on it. This isn't because I especially like macs but it makes sense if I want to use iTunes as my media player (arguably works better on OSX than Windows). It also has a 'pretty' front end and is simple to use for non-technical users. There's evidence on the OSX86 website that it all works perfectly well on the i9300 with no driver issues so this part shouldn't be too difficult.
3rd part: Build some kind of unit that will allow me to mount the modded laptop vertically like an LCD tv or picture frame on the wall. This would also mask the cables that would be protruding from the underneath of the screen (previously the back of the laptop).
4th part: Look into wireless keyboards, mouse and remote controls so that the whole thing can be operated and switched on/off remotely.
And that's basically it. It's not the worlds most inventive mod (has it been suggested on here before? couldn't find it in a search) but it does make a very nice tablet/LCD tv style pc with a nice multimedia front end and remote control functionality.
i have seen and read about cooling dock stations for the i9300 that involve removing the PCMCIA slot insert. i am curious if my notebook would benefit from leaving this slot insert out even without a cooling dock? would the extra ventilation be of any value? i am currently uninterested in buying a cooling dock.
My laptop takes ages and ages to open applications, new browser tabs and websites. Quite often websites I visit give me a "session expired" message. Sometimes an application will give me a message saying "program not responding" but if I stay patient and don't close it, after some time the application opens!
I have a Dell Inspiron 3521 Laptop. I get this message from My Dell:
Dell Notification about Antivirus Conflict: You have more than one antivirus software enabled. This can lead to conflicts that may impact performance.
I have bought and installed BitDefender Antivirus ... the conflict must be from Windows Defender. Maybe I should uninstall Windows Defender ... how do I do this?
I'm curious if anyone knows of a higher capacity fan or fans for the gpu and cpu heatsinks in an I9300/xps2.. I got to wondering if there are same size fans which move more air, maybe they spin faster, higher RPMs.. Also, would cutting slots or a hole in the left side of the cpu/gpu heatsink fan help or harm that side..? Anyone played with this, or experimented? My 7800gtx GPU idles at near 60degrees when fan control is set to auto..
I was wondering whether there was anyway to plug two external monitors into the i9300 so that one was the 2nd display and the other replaced the main display on the i9300. I'd quite like to use my laptop as a desktop pc (have the lid closed and hidden away somewhere) but I suspect that the two outputs are mirror/cloned versions of each other - can anyone clarify? And if this is the case, are there any compatible nvidia cards that I can use that will allow me to use two separate external monitors at the same time?
I bought the 7800go gtx card from another person locally, and he also installed the video card for me. He followed the installation instructions from this website, and left after he installed the video drivers from Tweaksrus and got the resolution back to 1920 x 1200. After he left my place, I used my laptop with the usual applications, and I found the laptop to be much sluggish than before. When I tried to watch a movie in .rmvb format, there were often and obvious stuttering in the video playback. I was very disappointed as even 6800go vanilla (my original card) would play a simple movie smoothly, why would a much stronger card such as the 7800go gtx have any problems? Moreover, I rebooted my laptop multiple times and there were two times at bootup, an error said "no bootable device was found, press F1 to retry or F2 to go into setup". The other times it would boot up into Windows XP as normal. I left the laptop alone after getting so frustrated.
Thursday night: I tried using my laptop again, and the normal applications were still sluggish. I tried to watch some movie again in .rmvb again, and the stuttering video was unbearable. I then thought may be it was the video drivers' problem, and I uninstalled the tweaksrus video drivers the person installed for me. Then I installed the the mobile 7800/7900 drivers from Nvidia's website. It got even worse as the video playback stuttered every 3 seconds in a movie. Then when I tried to play Warcraft 3, the video also stuttered, which was very surprising as even 6800go vanilla would handle it smoothly in the past. I then tried a couple more drivers from Laptopvideo2go, and the sluggish performance was unbearable. I rebooted my machine for about 13 to 15 times and there were again two times showing the "no bootable device" error message at start up.
Some other things I noticed:
On some of the video drivers I installed, it showed the GPU temperature, and it was 70C when it was idle. Is that even normal? Seems too hot as people here said idling temp was around 40C to 50C.
Some questions that I have:
1. What is going on with the error "no bootable device"? I have never seen that before in the past 1 year and 9 months (since I have my i9300). I am sure it is related to this video card upgrade. 2. Do you have similar video stuttering issues when you are using the 7800go gtx card in i9300? 3. Do you think the card may have some overheating issues? 4. What video drivers am I supposed to use? Tweakrus has been down for a few days already. I am a very casual gamer so I pretty much just want movies to play smoothly and games running a little smoother and faster. 5. How is it possible that when go 7800 gtx supposed to be 2+ times stronger than go 6800 vanilla, would give such poor performance?
the computer booted again after that, but went through the full POST sequence.
Once the computer booted to windows normally, i ran ATI tool, and received the blue screen again roughly 17 minutes into the scan for artifacts test. No artifacts were detected at all. I have not yet run prime95 to test for processor stability
The computer booted fine after that, running through the normal shortened POST. It booted to windows fine and where im typing this post.
Some more information:
The 7800GTX was purchased used from a forum member. I previously overclocked the card to 440core and 1250 mem. I kept the overclock for a week or so, but noticed no differences when playing C&C 3 (the only game I play). I also applied ZALMAN's Super Thermal Grease to the card (reviews say it works as well as artic silver 5). I then dropped the clocks back to stock. That was roughly two weeks ago.
The 1.7-2.26 pinmod was not stable at stock voltages. The voltage was increased via pinmod, but I can't remember the exact amount. Two jumper wires were used in the volt mod however.
At idle, the processor reports a temperature of ~35 degrees. The 7800 idles around ~55. Underload, the processor jumps to around ~65 degrees. The 7800 was at 77 degrees when the computer crashed running ATItool.
I am currently using the XPS2 BIOS A05 and the laptop2go 92.91 nVidia drivers.
I'm wanting to paint the trim on my 9400 black with the Krylon Fusion paint which seems to be so popular here. I was wondering though which colour people have used to get the XPS effect - gloss black or satin black... or both?
how these come out on the different surfaces, i.e. the white and the grey,
Also on the XPS parts, is the black of the lcd bezel the same as on the trim round the palmrest?