I have a Dell 7520 laptop with 1366x768 res without touchscreen... I want to change my display panel to one with 1920x1080 res with touchscreen...
View 5 RepliesI have a Thinkpad E530 which has a 1366x768 display panel. Unfortunately, This resolution began to be low for my usage (some applications don't even enter the screen entirely!), so I'm searching for a higher resolution panel (like 1600x900 or 1920x1080). Could this be made or the new screen wouldn't work?
View 1 Replies View RelatedI just received a refurbished HP ENVY TouchSmart m6-k125dx Sleekbook. I can't set a resolution higher than 1366 x 768 though according to specs the native resolution is 1920 x 1080. I updated the Intel HD graphic driver and the BIOS but that did not work. Did HP possibly reinstall a wrong display as part of the refurbish?
View 3 Replies View Related>HP Pavilion g7 series
how to change the screen resolution but, it won't stay at recommended resolution when I restart my laptop, it keeps going back too the smallest resolution. I have to go and change the resolution every time I turn it back on.
I can't change my monitor's resolution and the screen brightness after I upgrade the windows from windows 7 ultimate to windows 8.1 pro build 9600I've already installed graphic card , but i can't change my resolution more than 1024x768 My laptop is HP 431 with intel core i3-2310m CPU @ 2.10 GHz , AMD Graphics HD 7450M , DDR3 1 GB (i don't know why , but i've already installed AMD Graphics HD 7400M Series because my notebook isn't compatible with other AMD Graphics) , OS 64-bit
I think this is the problem [URL] ....
my laptop's lcd screen died 1 month after guarantee expiry. Since original LCD replacement screens are crazy expensive, I bought physically compatible lcd screen, that supports same resolution.
But I cannot get any higher resolution as 1024x768 (I've used 1400x1050 on original). I suspect there is a problem with drivers - my screen is recognized as plug and play monitor, but settings won't offer me any higher screen resolution.
My TV's native resolution is 1366 x 768. My VAIO FW-190 has Intel Chipset and both the Windows built in software and Intel provided graphic card settings software do not show the 1366x768 resolution. I can't find a way to set the Vaio's HDMI output to that resolution.
View 3 Replies View RelatedMy Laptop is Vostro 1500 with WXGA (1280x800) and my friend's ASUS G1S with 1680x1050 panel.
He doesn't like his panel because everything is too small and we decide to change panel.
Vostro panel woking great with the ASUS G1S, but ASUS panel can not work with Vostro, when turn on, the screen split 2 part in POST and change to dark when log on to windows.
We just change the panel, can not change the inverter.
How to solve this problem? Can anyone help me?
This may be an unusual inquiry but I'm wondering how hard it can be done.
Yes, I took a look at their service manual but if you have done it and have some tips, please let me know.
I have 2 Dell Studio 1535 laptops bought from their Outlet.
System 1: Blue LCD cover, ATI 3450 video, Duo Core 2Ghz.
System 2: Black LCD cover, Intel X3100 video, backlit KB, Duo Core 2.16Ghz
I have used the search, and this is the same issue as many others have described, and only provided an answer for Nvidia drivers.
I have an e1505 with XP pro installed. The video cardis ati mobility x1400. I have all but the trackpad drivers installed. Quickset is installed as well. The problem is when I close the lid of the laptop. The screen seems to resize and keep the icons at a lower resolution position. If I restart the computer, the icons loose the position and go into a standard grid on the left side of the screen. I can manually restart explorer through task manager. If I do this before i restart, the icons go back to a normal, non changed position. After restart, there is no change.
This issue only started after I plugged in an external monitor for the first time.
I have turned off quickset, and reinstalled the ATI drivers.
I cannot adjust the brightness of my display using the Fn keys or the Control Panel... I have already had to replace my battery once... I need to be able to adjust the brightness in order save my battery life!
View 8 Replies View RelatedI just got an Aspire 6935g today. The model is full HD but I could not change the resolution to 1920x1080. Does anybody knows how can I do it?
Another think my model came with C2D P7350 (2ghz). All the the 6935G that I've seen comes with 2.26ghz. Isn't not strange?
My HP built in notebook webcam was at 640 x 480 resolution normally, but all of a sudden, it changed ti 176 x 144!
how the heck this could have been possible? not to mention that the quality is very very Low
and i don't see any way to change it!
maybe i can reinstall the drivers for hp webcam but i find no specific one for my model anywhere!
I received my dell inspiron 17r SE few days ago, eveything is right but i 've noticed that the battery charge is always down 25%. I guess that this is some kind of battery protection or whatever but i don't know how to change it in order to take the laptop out of home.
View 15 Replies View RelatedMy brother just bought an Acer Aspire 3680.He purchased 1 gig of DDR2 Memory from Crucial. When we get to the desktop the screen is fine at first then the screen goes off and back on with 8 bit display. 512 DDR2 came in the machine. Crucial site said he could mix memory sizes. I tried it with the 1 gig stick by itself in case the mixed memory was the problem. Same thing..I've tried 2 sticks of 512...same thing. I've tried 2 sticks of 1 gig each..same problem. This laptop won't allow any upgrade at all. Will only run correctly with (1) 512 stick. I've never seen this problem before. I've installed many memory sticks in computers. This is a first for me. What could be causing this?? Any advice would be appreciated. BTW. the computer shows the upgrade amount of memory but the display color keeps changing to 8 Bit! I change it back to 32 and it reverts back after a few moments to 8 Bit. I went to Acer and installed an updated driver for the Intel Graphics card thinking the driver would help. I haven't installed a bios update yet. Called Acer and they said to return it for repair.
View 4 Replies View RelatedWindows 8 64 bitProduct Number: E9G80UAI recently bought this about 4 months ago and it did fine for a little while. But recently it would do this annoying glitch. The screen would act as if I am pressing the screen somewhere in the middle of it and selecting anything within it's range. This may not seem so bad by the sounds of it, but if you're playing a video or are on a website with links in that area it will either click on a link or stop/play videos. It's very annoying!
Troubleshooting: At first I thought it might be my touchpad, so I made sure I didn't touch it during these times. But it would still do it even if I'm not touching the laptop. So if I were to only use my wireless mouse to go through webpages or whatever, it would still do the phantom clicking.I then thought maybe it's my wireless mouse, so I disconnected the USB receiver from the laptop and it still does it.I then tried getting tech support online with HP and they accessed my computer and tried a few things like removing the touchpad driver and whatnot with no results. He eventually told me I would have to send it to them to have it repaired (still in warranty). However, I don't have the time to send my laptop to them for repairs.
My final thought was to disable the touch screen. Which I did by going to device managers and disabling one of the HID options. I had several, so I had to try each one since none were labeled as touch screen, but only as HID compliant device. This has worked so far and it hasn't clicked anywhere yet.
I thought about updating the driver, but I can't find it on the HP site and when I try to update driver through device manager it says that it has the best driver available, which most of the time is BS. I guess I just need to know where I can find the true driver for the touch screen.
HP ENVY TouchSmart 15-j051ea
I have noticed that my touch stops responding to touch when the ambient temperature goes above 22 degrees C. To be clear the laptop is not hot, the laptop is at room temperature. Nothing to do with the fan or laptop cooling. When the ambient temperature drops below 22 degrees C it start working again. Do I need to put it in for a repair?
I've recently bought an HP Probook430 and installed Windows 7 Ultimate 32bit and I don't seem to be able to change the display brightness, using the fn button+f9/f10 (although volume settings are changed in the same method smoothly).
Although the brightness settings don't seem to change, this bar does appear when pressing fn+f9/f10. What should I do in order to make the display brightness settings changable?
Every time I go on my laptop (Inspiron 15 5000 series), the touchscreen works for a while, and then it won't. The only way to use my touchscreen again is to shut down and the restart my laptop...
View 1 Replies View Relatedi just found this forum and it seems like you guys could help me answer this question. i have a dv2000 laptop i bought about 2 years ago and the screen has started to mess up. essentially it has two problems.
1. there is always a vertical line about a pixel thick that stays a yellow color. no matter what is on the screen, the line is always yellow. if i bend the display panel a bit it disappears but comes back as soon as i let go.
2. when i open and close the laptop to adjust the screen angle, the screen starts flickering with these white lines. i have to keep messing around with the screen (moving it back and forth) for it to come back to normal. im not sure if a cable is loose or maybe broken.
im assuming that i need to replace the entire display panel but im not sure if i can get away with just buying the lcd screen and replacing it. i can probably get rid of the yellow line on the screen but i think the flickering is caused by something else. could it be a loose cable that i just need to fix?
I have an Inspirion 3137 with a clean install of Windows 8. My touch screen does not work at all. So far I have:
- installed all available driver updates from Dell
- installed all available Windows updates
- updated to windows 8.1
- installed all original software from Dell backup image
I tried following troubleshooting to calibrate the touchscreen and the calibration options are not available in the control panel.
I have found that the touchscreen is not listed in the device manager under human interface devices. I found an updated chipset that claims to fix this issue but it is apparently not compatible with this computer.
My 15Z touchscreen works intermittently. It will be working just fine, then it starts to take a second to respond. Then it stops responding at all. Then it starts working again. I cannot identify any pattern to it.
View 1 Replies View RelatedAfter the latest Windows update my machine restarted to no USB mouse activity. I checked Device Manager and could see that the USB root hub was not functioning so I then proceeded to reuse Windows update and it told me there was an update available for Intel USB hub so I ran this and after another restart and some fiddling (it tried to make me install a USB keyboard driver which I had to uncheck as it kept failing and preventing the mouse driver installing) I got my mouse working again.
However I now have no touchscreen functionality) this is shown as non fuctioning in the device drivers, it also says the transciever for the mouse isn't recognised but as the mouse works I don't really care about this).
In answer to the suspected responses, yes I do have a touchscreen (or rather did have!), yes I do have the latest BIOS, I've run the Dell update and touchsceen doesn't appear as an option for device drivers, no this is 99.999% not a hardware issue unless its unbelievably coincidental with Windows Update and no it did not give me an option to rollback my drivers for any of the devices that stopped working.
How do I get my touchscreen functioning again?
I have a zbook with a nvidia quadro 610m graphics. I cannot get the gpu to save settings or engage when playing games. It was working until I tried to give windows 8 a try.I did a fresh install of windows 8. Then I installed the hp drivers cd that came with workstation. Everything says it completed successfully and I've rebooted multiple times.
When I open the nvidia control panel, none of the settings I change stick. E.g. tell every program to use the 610m. I click apply it looks like it was successful. However, if I open the nvidia control panel again, all changes are reverted. I restarted after hitting apply too. It doesnt matter what the changes are, they all revert.
I'm guessing I screwed up with the driver install or something but IDK.The device manager says that the 610m is working properly and the driver is up do date.
I recently purchased a stock-standard Inspiron 3521 Touch running windows 8.
The touchscreen worked for the first few days but has subsequently stopped working which I suspect is due to windows/other software updates.
The system is not showing/recognising any Tablet and Pen hardware/drivers.
The shipping Packing Slip for my unit lists the following for the LCD panel..
PRODUCT CODE: U771G
Description: Module, Liquid Crystal Display 17WUX, Red/green/blue,Lg Philips LCD,M6400..
Can anyone confirm if that the correct product code for my Original Quote which stated "17 inch Wide Screen WUXGA RGB-LED LCD for M6400 (320-7312)"..
i'm guessing that its the RGB backlit display i'm expecting. its NOT the covet model.. and I didn't go with the E2E because I wanted more of a matte display..
My other question is:.. is it just me or does the LCD Housing seems to be very flimsy and has lots of flex when lifted from the corners..
I want to install AMD Video Driver and Control Panl alongside with Intel Video Driver and Control Panel.
Here is My Laptop System Information :
OS Name Microsoft Windows 8.1 Enterprise
Version 6.3.9600 Build 9600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name TUHIN
System Manufacturer Hewlett-Packard
[code]....
When I click on display settings, I get the following error message and it won't allow me to adjust my resolution, which right now is at a very bad setting.
I haven't installed any new drivers recently, this just occurred after playing a game that caused my resolution to lower ....
Brand new laptop 3 days old - model 7737. Came with Win8 and touchscreen was working fine
Have updated to 8.1 and installed other software like office, etc and touchscreen is now not recognised. System says "no pen or touch device"
Device manager also shows an unknown USB device (device descriptor request failed)
Device manager also keeps refreshing (like every few seconds) - sometimes the USB device disappears completely then comes back again as unknown.
I'm sure this must be a driver issue but have tried all those I can find.
I bought an Inspiron 14R about four months ago. The touchscreen worked fine until maybe a month ago. It was after the computer had some sort of update that the touchscreen stopped working. Any clue if there is a driver or something that I can download to fix this problem?
View 7 Replies View Related