I have a problem in my inspiron mini 1012,it Hangs and wont pass BIOS loading.. i have tried to press f2 it can but it takes long time to pass and went in bios menu after any minutes its hangs again..and i tey to press f12 to use another boot option, but it can not pass...
View 12 RepliesIn mid November 2012 my laptop Inspiron Midi 1012 (with window 7 starter) suddenly stopped booting up.
I press the power button and I get the Dell Inspiron page & loading bar where I can also select F2 for set up & F12 for boot options or simply wait for boot up
Another page will appear (if I just wait at the Dell Inspiron logo page with loading bar) saying windows did not shut down succesfully. If this was due to the system not responding, or if the system was shut down.... & ask me to select booting option between safe mode, safe mode with networking, safe mode prompt or start windows normally.
I tried selecting every mode but to no notable result the only things that happens is that the Microsoft Corporation logo appears with a loading bar for 2-3 seconds then the screen will turn back and only my white arrow will be visible on the screen. At this time, no keys & short cut keys will work. The light of my computer is till on, I can still see some luminosity on the black screen. I can move the arrow around on my screen. The black screen won't change if I let it be for minutes or hours, no windows will pop up if I put a usb memory stick or plug my external cd/dvd player in the usb outlet.
I tried to use a usb transfer cable between my tower pc & my laptop Inspiron Mini but it doesn't work since windows doesn't boot on my laptop.
I tried F12 (boot option) when my computer start & selected diagnostic but there is no error detected (in short & long diagnostic, test memory, test system). I also tried the other booting options but to no avail (hard drive, network, ...).
Something is wrong with it. I am running it on windows 7. I did a [URL] .... system restore to like a year ago and it still won't connect. Not only does the wifi not work, the Ethernet cable wont work also. and it says im connected to a public network but with limited access. what should i do?
View 1 Replies View RelatedMy sister has an Inspiron Mini 1012 Netbook (Windows 7 starter etc etc) and I need to action a Factory Reset.
My issue is, there doesn't appear to be any option for F8 when the netbook boots up.
I've googled the issue & it appears many people have had this issue.
I've tried the simple F8 & F10 options, along with FN + F8 &/or F10, Ctrl +F8 &/or F10 etc etc.
I'm at my wits end with this now as it doesn't appear to enter the recovery option with any of these functions.
There is definitely a recovery partition to the netbook, and the most annoying thing of all.......
I actually managed to restore to factory settings on this netbook no more than 6 months ago!!!
I have this dell inspiron mini 1012 with problems to charge, it always same plugged in, charging but it keep at 8% and if i disconect the AC the computer just shutdown.
i've reset to factory software like 3 times and its doesnt work at all so i just need to know if my battery just pass out.
I have a Inspiron Mini 1012. I created the restore factory image on a usb through the Dell DataSafe local backup program that it came with. Had no problem installing it. But when I turn on computer and boot into the usb I get an all black screen with the following. BTW the laptop has no problem starting up regularly no issues at all. Will be selling and want to wipe the drive.
WINDOWS BOOT MANAGER:
WINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE CAUSE.
1 INSERT DISC
2 CHECK LANGUAGE SETTINGS???
3 CLICK REPAIR COMPUTER
FILE: /WINDOWS/SYSTEM32/BOOT/WINLOAD.EXE
STATUS: 0xc000000d
Info: the selected entry could not be loaded because the app is missing or corrupt.
AGAIN, I have no problem starting computer up any time. Did I load this wrong? I just purchased the USB for this so anything I need to do?
it's been like a year when i bought my aspire 5920g and everything run fine.
It's been about one month that sometimes the computer hangs up at welcome screen or loading the taskbar( the icons are loaded but you cant press them) and the mouse pointer keeps spinning(like it's busy) and nothing happens and I cannot press anything. So i have to restart the pc manually and run a check disk, and every time the problem is solved (this is annoying). But these days the chkdsk command cannot resolve the problem.
Today after welcome screen it hangs on black background and only the cursor can move. I restarted several time and it keeps freezing. So basically i cant start windows.
4GB ddr
Intel centrino @2.4
Nvidia 8600m GS
hdd hitachi HTS542525K9SA00 250GB
WIn7 Home premium x64
I am having trouble using the Wireless 365 BlueTooth card. I bought it from Ebay. I installed it fine.
I downloaded the driver R226746 from Dell and that installed fine as well. But I cannot open the bluetooth settings and when I try to add any devices to computer, it just stays searching and does not find any of my devices
When my 1012 is booting there is an alarm (beeping) before Windows comes up. Not a few beeps, but probably 50-100. What is this and how can it be mutted?
View 1 Replies View RelatedI've been expecting a problem recently; when I turn off/restart my Inspiron 7720 and I press F2 to load the BIOS, I notice the bar fills but it continues and loads windows normally. I tried updating the BIOS from A10 to the newest A12. If i press F12 for boot options it works fine, it's only when I press F2 for the BIOS.
View 3 Replies View RelatedMy compaq presario CQ71 notebook fires up, tells me it's loading window files then just hangs on a blue screen forever. I've tried every possible route via all F-key functions without any success, including factory re-set but still nothing.
View 9 Replies View RelatedI tried to update my bios to A07 -> A11 (the lastest). But the update failed. Ok. I just close the updater. I open Google Chrome, surf on the Internet etc. After 10 min, I shut off my Dell computer normaly. Now when I turn my MiniPC on, it just doesn't do anything... My hard drive doesn't starts. The screen stays black...
View -1 Replies View RelatedCan I copy windows 7 OS recovery disc onto a flash drive to transfer to my hp mini 210 1032cl? I don't own a usb DVD and really don't want to spend on something that I am only going to use once.
View 1 Replies View RelatedMine is an Inspiron 14z, running window 7 ultimate. The last 2 days, my battery will only charge up to 70% then it just stay there although the icon shows "plugged in, charging".
I've tried a couple things:
-Unplug-plug
-Pull out the battery put it back on.
-Uninstall/ Install Microsoft ACPI-compliant control method battery
-Restore to point before this occur.
I forget my BIOS password on Dell Inspiron mini 10 (PP19S).
System Disables is [03091]
I upgraded to BIOS A15 when it came out and since then I have had a problem that I never had before. I have now downgraded to BIOS A14 and the problem is gone.
Problem description
When rebooting or shutting down Windows XP the shutdown process hanged. I think it only occurred when the computer was docked in the docking station. I have the advanced docking station with serial port, parallel port etc.
After I upgraded to A15 I noticed that the parallel port and serial port got listed the safe remove dialog box. With A14 and before they are not listed.
I recent;y installed a version of windows on my Dell Laptop, Inspiron 6000. I worked for a week or two then when I turned it on a couple days ago, it won't go pass the black screen with the blinking white line. A user some where on this site on an other post that had similar problems said that it to re-install and delete the existing partition and create another one with 120GB. I did but when creating another partition, I tried to type in the 122880 MB (122880MB = 120GB), and upon pressing ENTER, the numbers 122880 goes back to the number of MB of the partition disk space I had previously. I hope this all make sense. I do not have the money to buy another laptop. I have a Windows XP CD, but not the original. The laptop worked fine before with this version.
To fix the blinking line on the start-up black screen, all I need to do is to re-install windows XP and change the partition to 120GB. But every time I try to change the number of MB, it doesn't work but reverts back to the original number. Is there another way to fix the blinking-white-line-on-the-start-up-screen?
Also, I tried to use the repair control...doesn't work.
The processor of the mini laptop is atom N450, i want to know can i install windows server 2003 32 or and 64 bit os on this machine.
View 10 Replies View RelatedAbout half the time I boot up my laptop the bios hangs and I have to hard-reboot it to get it to work. Is there anything I can do?
View 2 Replies View Relatedi've successfuly flashed my 4810t to bios 1.10, 1.20 and 1.22.. but yesterday i tried to get to 1.23, it installed ok in windows and restarted... now it wont go past the "press f2 to enter"... i press f2 and nothing... after a few keypresses it starts to make a sound... oh and the leafy button works here...
is there anything i can do? or i must use the warranty?
I have a compaq v3010 us laptop that hangs on a black screen with a blue square asking me for a password and i do not know it. I need the bios password for it to get into the bios on it. The OS is windows 7. The hard drive is a seagate one ....
View 1 Replies View RelatedI have dell isnpiron 5110 and currently I have installed a new copy of windows 8, windows 8 is working fine but when I plu gin the charger, laptop hangs, no mouse movement, every thing freezes, ctl+alt+del does not work, then only option to shut down the computer forcefully
my bios is upto date, I have installed new bios software and also upgraded graphics driver from dell website
I have a Inspiron17R N7010 and when I turn it on the windows start up screen freezes up. I was going to do a system restore but don't know how since windows 7 never finishes loading.
View 5 Replies View RelatedI have Dell Inspiron 15R n5110 laptop. The problem is about windows 8. Previously there were 2 problems. 1. The screen gets black and never work except in the basic mode. (This problem was solved after new BIOS)2. The system freeze (Hang) suddenly and doesn't respond to any thing and I have to shut it down from power button (not resolved Till now)Is there any solution for this problem or any thing I can do to prevent this hang???
View 20 Replies View RelatedI have Dell Inspiron 15R n5110 laptop. The problem is about windows 8. Previously there were 2 problems. 1. The screen gets black and never work except in the basic mode. (This problem was solved after new BIOS)2. The system freeze (Hang) suddenly and doesn't respond to any thing and I have to shut it down from power button (not solved Till now)Is there any solution for this problem or any thing I can do to prevent this hang??
View 5 Replies View RelatedLaptop has not been used regularly for quite a while. The system booted up fine and loaded Windows Vista with no problem. Everything seemed to be in working order. Decided to wipe the system, load productivity applications, and give it to my grandson who is starting college. I depressed the F8 key during start up and entered the recovery routine. I selected the "restore to factory settings" option.
The system indicated it was first formatting the drive and then restoring the system. When I restarted the computer I got to the Dell Boot Screen. Displayed on the screen is the Dell logo, "Inspiron 1520 Series", progress bar, and "BIOS Revision A03". The progress bar fills from left to right and restarts the process in a perpetual loop. When I power the system off the on; the first boot cycle seems to take a lot longer for the progress to fill, but after that it loops with the progress bar filling quickly.The system no longer responds to the F8 key being depressed during start-up.
Consequently, I can not repeat the "Restore to factory settings" process. I have tried to boot the system several times with the same results. When I press F12 during and get "boot options" choosing "Internal Hard Drive" or "Onboard NIC" makes no difference. When I run the diagnostics option from the F12 screen; the system displays the heading: "Pre-boot System Assessment Build 4106" and passes all tests.
It appears to me that the recovery to factory settings routine has in some way damaged the system. It had been working fine before the procedure and hangs during boot afterward. How to get the system back into proper operating condition with the factory settings restored.
I purchased an inspiron 15r 5520 a few months ago. I ran assassins creed 3 on it and have run into some problems.
Now I read a lot about this problem on other forums. Whenever I run the game it crashes after some time and hangs up my computer too. Many think its because the dedicated graphic card (Radeon 7760M).
I have had my Inspiron 7347 for a few days. When operating on the battery, the touchpad exhibits some quirks that make this P:C extremely hard to use as a portable laptop.
The mouse on the touchpad hangs up intermittently, sometimes for several seconds. This erratic behavior makes using the mouse terribly difficult.
When scrolling using the mouse on a vertical scroll bar, the right click menu for the desktop keeps popping up. I must move the mouse away from the scroll bar, left click to get rid of the right click menu, and return the mouse to the scroll bar. Sometimes this behavior is constant when scrolling through a long page, making it impossible to use the mouse to scroll.
When I am loading windows on my dell inspiron 6000 laptop it stops and I get a error code 0x80070001 what does that mean ....
View 4 Replies View RelatedI'm trying to upgrade the operating system on my laptop. Preinstalled Windows 7 x64 Home Basic, and I update to Windows 8 x64 Professional. At the end of the installation process hangs and all I see on the screen - this is the logo in the center of the screen, a few words at the bottom and five frozen in one position points that previously ran in a circle.
I repeated the installation several times, but all of these attempts have ended the same way.
Have any of you have a similar situation and how you solved it?
I have a laptop - Dell Inspiron N5110.