Dell Latitude E5520 :: Citrix Screen Resolution At 1260x 760 When It Should Be 1920x1024
Apr 6, 2012
When I first got my Latitude E5520 (i7, 8Gb RAM, Intel HD graphics) I could connect to a Citrix based VDI desktop with a screen resolution of 1920x1024. Suddenly it dropped to 1280x760. I have never been able to get it to shift back to 1920.
The Citrix client has been replaced with both available options. Same result. Every possible configuration setting has been set to 1920x1024 to no avail.
The native desktop is at 1920x1024. Shifting into the VDI session, the only screen resolution offered is 1280x760.
I have also reloaded the graphics driver. Same results.Going into the advanced graphics configuration on the laptop confirms 1920x1024.
Other laptops allow me to log in to the same VDI desktop in 1920x1024 resolution so it is isolated to the laptop itself...
View 3 Replies
ADVERTISEMENT
Apr 19, 2013
I have Latitude E5520 i5 with 8GB RAM+ HD 500MB, BIOS Version A12
I tried to install WINDOWS 7 32/64 Bit but i get blue screen in the end of installation.
View 2 Replies
View Related
Oct 13, 2014
I acquired a Dell Latitude E5520 that I redid myself and downloaded the drivers from Dell's website. I would like Dell quickset x64 for windows 7. The one I had for my old laptop does not work. I tried googling some but can't find it.
View 1 Replies
View Related
Apr 16, 2013
Dell latitude e5520 always boot with check disk, with out giving the check-disk command.
View 11 Replies
View Related
Aug 10, 2012
We have an unusual problem with a Dell Latitude E5520. It has been built with Windows 7 32bit SP1 and McAfee EndPoint Encryption, as we do with all of our laptops.
When the laptop is powered on and then docked, everything works fine. If you then give the laptop a restart whilst docked, it just doesn't! It shuts down and stays in some kind of power save mode. I have been through all of the Power options, including closing of the lid and turned off everything that could be causing this to happen, but still nothing.
If the power button is pressed whilst docked, the light comes on but that's it, no activity. Undock it, power up, close the lid and dock it again, all of the external screen, keyboard and mouse work as you would expect. I believe all of the drivers are up to date (it is a new laptop).
The docking station is an E-Port Plus DP/N: FFCV6 A00
View 5 Replies
View Related
Nov 5, 2014
Attempting to install 1600x900 screen and getting wrong colors and bad resolution. I understand the cable may need replacement.
View 5 Replies
View Related
Apr 18, 2013
I just got my docking station for my Dell e5520. I got the one monitor to work with the VGA set up. I would love to get the two DVI monitors working instead of one monitor. I am not sure if this is possible or not. If it IS possible, how do I go about doing it?
View 1 Replies
View Related
Oct 13, 2014
I acquired 2 Dell Latitude E5520 one for me and one for my co-worker. I noticed they have BIOS password locks on them. But we don't know the password. Anyway to unlock them?
View 5 Replies
View Related
Feb 19, 2013
I have a Latitude E5520 that is having some strange issues. If I have i plugged in to a power cord, close the lid and disconnect the power cord, the unit shuts off. Sometimes when undocking, the unit will shut off as well.
I have checked the power settings and confirmed that when the lid is closed, no action should be taken.
The battery is fully charged and the laptop runs fine on the battery.
This has the latest BIOS revision A09.....
View 1 Replies
View Related
Dec 19, 2014
I have a Dell Latitude E5520 and lately it has been extremely slow, and characters on screen tend to lag far behind my keystrokes occasionally not appearing at all. Sometimes when I click on a button it will lag for several seconds and then go through, other times nothing will happen at all and I will have to click the button again and it works. Recently the laptop was taken on a plane and the in-flight wifi was used, that is the only thing done recently outside of the normal routine.
I have booted into safe mode and the lag still occurs. I have antivirus software installed and up to date.
View 3 Replies
View Related
Apr 10, 2009
I have considered purchasing a Dell latitude D630. I've looked at online retailers such as liquidation.com, ascendtech.us, ebay, amazon...but so far can't find a D630 at the resolution of 1440x900, only at a lower resolution of 1280x800.
So, looks like the only option is to buy a screen sold individually, and upgrade the laptop manually to replace it.
The question is, is it safe to replace a lower-resolution screen with a better one on a laptop?
View 10 Replies
View Related
Jan 5, 2015
I have a Latitude E6530 and I'd like to upgrade the resolution to 1920x1080. What cable and LCD part # (or compatible) do I need? The panel is easy enough to replace but I have no idea about the LCD cable.
View 9 Replies
View Related
Feb 15, 2013
So I just had Windows 7 reinstalled as my harddrive died. But after the reinstall, Windows 7 only detects my laptops native resolution (recommended resolution) as 1280x800.
I know this laptop has the 1440x900 display, I have coworkers with the same laptop and their display shows the "recommended" is 1440x900, and I know that was the case before I lost my drive and got a new one with a reinstall.
This laptop has the NVIDIA Quadro NVS 160M adapter, and I have the latest driver for this from NVIDIA.
Why does windows think my native resolution is 1280x800. I can use the NVIDIA driver to force it to go to 1440x900, which works. I was just wondering why it is doing this. Is there some inf package that I need from Dell?
View 1 Replies
View Related
Apr 18, 2010
I just bought a brand new Sony Vaio VPCF11M1E and I have the following problem:
Because in normal stand the screen is very small, I enlarged it to x150%. Everything becomes bigger, but the following parts are blurry and absolutely not sharp:
-Pop ups, of programs and of windows itself (like advanced settings of something and then a new windows pops up, that one is then totally blurry; you can read it, but it is not the good resolution)
-Google chrome (and with that, all the internet pages)
-The google chrome on the desktop is also very blurry, while all the others, are still sharp (after the enlargement by 150%)
I have tried everything (32 bits colours is on, cleartype is on). I also did a system restore to the first days I bought the laptop and then it was on 100% so the resolution was excellent, but then I put it on 150% and again, the parts I mentioned above, were blurry.
View 4 Replies
View Related
Jul 28, 2009
I just got my new Studio XPS 1640 in the mail today and got a little excited. I started tweaking stuff galore, following the variety of vista tweaking thread for reducing boot time, speeding up your comp etc... but I think I must have screwed something up because the computer started lagging like crazy. i couldn't even navigate in "My Computer"
So me, being all excited and dumb decided that I would reinstall Vista and partition my C drive (which is a 256gb SSD btw, if that's important), instead of learning about the Factory Image Restore.
So now my screen resolution sucks, and I'm frustrated and tired of trying to fix this. I just want it back to how it was before, fresh out of the box. I have the Vista CD and The Driver CD, and I tried installing every damned driver and application and whatever, but it's never the same as it came out of the box.
I can't find the webcam or facial recognition software anywhere and I'm missing the cool dock at the top and bleh. I'll stop ranting, but if anyone. ANYONE, knows how to help me I would greatly appreciate it. I just want the good laptop that I paid 2000$ for.
View 10 Replies
View Related
May 20, 2008
Currently i have my screen resolution at 1200x800 and i find it too sharp, the one below that 1280x720 is too squashed and too sharp, the one lower from that is too blurry, but perfect proportions (1024x768)
is there any way i can change to a one in between or something.
(15.4" Widescreen WXGA (1280x800) TFT Display with TrueLife ) (NVIDIA 8600m GT)
View 12 Replies
View Related
Dec 7, 2009
I just re-installed Windows Vista 32-bit Home Premium as Dell sent me a replacement HD as my current one went kaput.
It seems as though the max screen resolution I can go to is 1024x768...
View 5 Replies
View Related
Jan 30, 2010
I got a Dell Studio 1558 a few days back with a full hd screen. I tried changing the resolution to a lower one n it shifted down to a lower resolution but it din cover the entire screen! it had black bars on the side! any idea how i could
View 3 Replies
View Related
Dec 26, 2008
I just bought a Latitude E6500 with a WUXGA LCD with Nvidia NVS 160M to replace my old Inspiron 8600 also with WUXGA screen.
I am puzzled with one thing : with my old 8600 I was able to change resolution from 1920X1200 way back to 800X600 without any loss of quality. The screen always ramained crisp and clear.
Now, with my new E6500, anything less than 1920 X 1200 gets fuzzy. I read all about the "native resolution" speach, but what I can't understand is why the old laptop was able to show all resolutions properly, and the new on doesn't.
View 10 Replies
View Related
Mar 10, 2010
There is no configurable screen and the tech specs don't say other than "HD" which most people use for 1366x768.
Has anyone been able to confirm the screen resolution on the new Vostro 2500 series or 3400?
Any idea on how long it takes them to make it a bit more configurable?
View 10 Replies
View Related
Jun 12, 2009
I'm having some trouble with my m6400, but I'm not sure if its a Dell problem or my gfx card or Windows Vista itself.
Whenever I start my laptop the screen resolution gets reset to 1024x768, and I need to manually re-configure my screen.
Does anyone have an idea why this may be?
View 7 Replies
View Related
Apr 20, 2010
My XPS 1730 has a couple of issues I can't seem to resolve. I just updated the bios to the latest version but that didn't help. If I set my clock to 9:45, it will run until 10:38 and then revert back to 9:45. It will do this endlessly. When I installed the new bios, I got a message say the RTC was fixed as I might have a clock problem. The clock ran last night for about 4 hours properly. Then I closed the lid. When I opened it this morning, the clock displayed the same time as when I closed it last night.
In addition, when I leave the computer on and just close the lid, the resolution goes from the highest (my preference) to the lowest when I open the lid again.
I have a new battery in the machine as well as it was left on last night with the power cord plugged in. All I did was close the lid.
Any suggestions would be greatly appreciated. Thanks in advance.
View 7 Replies
View Related
Apr 26, 2009
What are the 5 screen resolution options for the Dell Studio 1555 display with a 1900 x 1080 display?
"15.6 Inch Full High Definition(1080p) High Brightness LED Display with TrueLife and Camera/Facial Recognition"
Is 1280 x 800 one of the 5 resolution settings available under the Display Settings? I believe this is the lowest resolution setting where pictures are not distorted and out of proportion. Anything lower, like 1280 x 720, pictures become distorted....
View 10 Replies
View Related
Mar 3, 2013
But I'm encountering a big problem, my display is weird (there is some green filter added) in addition Windows 8 does not completely (it stop after the blue logo).
I can see something if I boot on my Ubuntu USB. Even the boot logo have the green filter.
On the others side if I come back to the original disciple screen, all is well. So, at a first sight I think it is not a connector problem or a graphics card problem.
It's a Dell Studio 1555 with a ATI Mobility Radeon 4500....
View 8 Replies
View Related
Dec 15, 2009
What is the probability that the next refreshed MBP will have a high res screen as an option. At least 1680x1050. I really want to buy a MBP before end of the year, but I would definitely wait if the new models have high res screens. But, who knows when the new models will be released.
View 10 Replies
View Related
Mar 3, 2009
had a Dell 1735..screen resolution was perfect and webpages i visited looked nice and sharp etc...purchased a new Dell studio 1737 laptop and it seems that the default setting is 1920 x 1200..this makes everything very sharp but to small to work with...the correct setting for the correct size etc...seems to be 1440 x 900..but when i change the settings to this size everything is the correct size but not as sharp...and websites i visit such as Facebook etc..the text on these pages seems different..now, when I place my old Dell studio 1735 beside my new Dell studio 1737 my old laptop which is set at 1440 x 900..my old laptop looks far sharper and superior to my new laptop! My old 1735 has the highest setting for resolution at 1440 x 900 while the new 1737 seems to have a higher setting option of 1920 x 1200. Is there a big difference between the 1735 and 1737? Am I stuck with just keeping my setting on my new 1737 at 1440 x 900 and putting up with the blurriness etc? Have tried everything from going into Catalyst center to adjusting settings in appearance in vista etc..
View 10 Replies
View Related
Jan 7, 2010
Had my Acer Aspire 8930 for 11 months now and I've always assumed it displayed images at 1920 x 1080 because of the blu ray drive and the fact it has a sticker on the front of the laptop which says 'FULL HD 1080 PLAYBACK'.
I've just gone into my display settings and it says 1680 x 945!
That is on the highest setting possible.
The sticker on the side of the box it came in says;
Aspire 8930G - 584G32Bn which according to [url] states at the top in the summary it boasts 1920 x 1080.
How can the sticker on my laptop claim full HD at 1080? Do I have the wrong screen on my laptop or am I missing something?
View 5 Replies
View Related
Feb 2, 2009
I'm considering getting an HP HDX16t.
Not sure whether the highest resolution will be too small for my liking -- if I get the 1920x1080 screen can I decrease the resolution without any problems if it turns out I don't like the highest resolution?
View 10 Replies
View Related
May 27, 2010
I'm thinking of purchasing a 15" MBP and am debating between the standard screen and the high resolution screen. I had a studio xps 16 with the 1080p screen and though it looked great so I would ideally like to get the high resolution screen. However, I wanted to see if I could get some opinions on the readability of the screen, is text readable? Does Mac OS contain a feature like Win 7 where you can increase the text size? I really liked the look and extra space higher resolution screens offer but did notice on the studio xps that without increasing the text size text (which it did by default) text and menus were too small. What are your opinions on the macbook's high resolution screen, which do you prefer?
View 5 Replies
View Related
Sep 14, 2009
Relatively soon after a Windows Update (Vista), my screen blacked out and the resolution changed from 1920x1200 to something like 800x600. After restarting the notebook, everything seemed to be back to normal, except my graphics card (GeForce 8800M GTX x 2) wasn't working, and upon looking in the device manager, it said the device wasn't working (code 43).
So, I tried uninstalling drivers/reinstalling drivers, etc. and nothing seemed to work. And now something I've done has made the main VGA drivers or whatever not work, and all I see is a big black screen on startup (but the mouse icon is on the screen and can move around).
View 10 Replies
View Related
