Dell Latitude E7240 :: Bluetooth Tray Icon Removed When Adapter Turned Off
Feb 17, 2014
When one turns off the Bluetooth adapter from the tray icon, the tray icon disappears. In order to turn the BT adapter back on, it appears one must go to the Device Manager to re-enable the BT adapter. This is inconvenient and not awfully intuitive for a usual business end-user. In the past the BT icon in the tray would remain, but turn color to indicate it's off. And the end user could right-click it and turn it back on when needed.
Currently it appears, turning off the BT adapter, actually disables it and it "disappears". Is there a way to simply turn the adapter off and more importantly back on without having users get into the device manager from their standard user accounts?
E7240 with Dell 1601 WiFi/BT adapter in use on Win7/64 Ult.
We are running more than200 dell computers in our company. lately we purchased E7240 for some users but it looks like the AC adapter does not work with the Dell E-Port docking station we have and that cause the USB hubs not to function at all.
Currently the workaround is to plug the AC adapter to the laptop instead of the docking station.
Our BIOS is updated to the latest version. also a message comes up when the ac adapter connected to the docking station before the windows boot up saying the ac adapter won't charge.....
My laptop fell off a table whilst the disk tray was open and jammed the disk tray shut.
It didn't damage the laptop at all, just made a whirring noise every time I turned it on and off because there was a CD still in there (been like that for a few months). However, today the tray opened a little and so I pulled it right out. I know enough about computers to know that I haven't damaged anything else, just removed the tray.
Now my laptop won't turn on, and even the charging light doesn't come on. A piece of plastic ribbon/connector that was attached to the tray is loose - could it be that?
I just got my new Studio XPS 16, but accidentally disabled the quickset tray icon. I've checked registry and tried reinstalling quickset, but nothing i do can get it back. Is there any other way to do it without having to reinstall my whole computer? (as i've already installed several other programs, it'll be quite some effort).
I have a Lenovo Ideapad p500 Touch. I recently upgraded my router to an AC1900 Router, and with it i wanted to update the internal wifi on the Lenovo. I purchased an Intel 7260 AC Dual Band with Bluetooth seen HERE . Install was pretty straight forward, seeing how im a IT Tech. Where I had an issue is with the drivers and getting bluetooth properly set up. The wifi part works without an issue. I can't seem to get bluetooth to work at all. When i go to device manager I see bluetooth but only if I select to view "hidden Devices". Im running Win 8.1 64x, Ive tried installing the drivers from intel, but it never seems to actually install the bluetooth driver. I don't get the icon in the system tray.
if everyone else has this problem or there is something corrupt with my windows?
When I switch the graphics to Speed or back to Stamina my system tray icons get bigger and look distorted. The only way to get them back to normal is to go into the appearance settings and set the icons for another size, it will make them small again regardless of what size i make them.
I should add that playing with the captions dropdown item in Advanced personalization just distorts them to a horrible mess.
How to set up so that tap with two fingers on the touchpad will preform like the middle button on a mouse. Can find that setting in the dell touchpad program. I am on a dell latitude e7240
I will walk away from my laptop dell E7240 for 5 minutes and it will go back to log in page. How do I change that setting. Also after a time it seems to go to sleep and knocks me off VPN connection during a web presentation if I do not interact with mouse during web conf. I have to use ctl alt del to log back in but then my VPN is gone. How do I extend the time the laptop stays active?
A company bought laptop with model : E7240 & E7440, So those laptops come with Windows 8 product-key store on mainboard. I would like to get that number because those laptops werer installed Wiindows 7 from our Global IT but right now those laptops are transfering to new owner and Global license of Win7 is end. Is possible to get product-key from each laptop for downgraded the license to Win7 without re-install the OS ?
We have bought a bunch of Latitudes E7240 and deployed them with the new Dell Data Protection | Security Tools (DDP|ST).Now we have discovered that if you attempt to login with the wrong credentials the device (HDD) will be locked.This is expected as it is one of the purpose of having Disk encryption enabled BUT if a user accidentally lock the HDD by typing wrong credentials you would expect to be able to UNLOCK it with the admin password. (You create one when first enabling DDP|ST)
So, the user forgot he's credentials and the screen only shows "The device is locked, contact your administrator" and with NO OPTIONS what so ever! How do I, as the administrator unlock the HDD? Where do I type the admin password?
Original Win 8 Pro, then updated to 8.1 Pro, the back lit keyboard works OK. However since I refreshed the system due to the hangs up problem at start up, the back lit key board stops working. Re-updated the OS back to 8.1 Pro again still not solve the issue.Does the backlit key board need special driver ? The device manager shows the keyboard as standard PS2
I have 2 new E7420 laptops that are replacing some older ones.
When I dock either of them, all I get is a flashing cursor on either the external screens, or the laptop screen. I get the Dell logo, then just a flashing cursor on the top left of the screen.
I can turn the laptop on, wait for it to boot, then dock it, but of the 3 times I've tried that, the USB didnt work once.
Have just upgraded to the latest BIOS, but it didnt change anything.
Is there some BIOS setting or something I need to change?
I have just gotten an E7240 computer and have noticed that the USB ports on the back of my computer are disabled when the computer is docked which is a very unfortunate feature of this new computer model. It seems there are many people posting complaints about this feature on the internet. It basically takes a computer that has 3 USB ports and makes two of them rather useless. It is very useful if a USB receiver for keyboard and mouse can be plugged in to the back of the computer so that the mouse can be used easily when docked, but also when the computer is taken off the dock to go to a meeting room. This then leaves the side USB port available for devices such as wireless projectors when in the meeting room. Although this computer was designed to behave this way, I think that most users would agree that this is a critical issue that needs to be seriously considered and fixed by Dell as soon as possible assuming that there is not already a work around available.
My Latitude e7240 when docked onto the PR03X docking station, the power adapter that is plugged into the PR03X completely goes dead. The only way I can reset the power is by unplugging and replugging the AC adapter FROM THE WALL. Tried the spacer. Tried double powering (1 adapter into the PR03X and another adapter into the e7240). Also tried plugging the laptop on first without power, and when powering up the laptop, it would boot up 10x slower than normal and sometimes hang. Also tried multiple other PR03X just to be sure the one i have is not faulty. The same problem is repeatable. The laptop has the latest BIOS.
It seems there is a power mismatch of some sort that would cause a) the adapter to fail, and then b) for the laptop to run extremely slow because of what?Is the problem caused by a faulty docking port on the e7240? I assume the PR03X is compatible to the e7240??
Does the Latitude E7240 can support two external displays without a dock? Can have one plugged in to the mini displayport and one in to HDMI and output just to these displays?
Or is it limited to just the laptop display and one single external display?
Latitude E7240 has Touchpad Alps. All works fine except settings "Flick" (Gestures -> Multi Finger Gestures).
This setting works, but after some time (random period) stops working. To fix this I need restart Apoint.exe or go to settings, deselect Flick and select it again.
My laptop's BIOS has latest version A11 and all drivers installed from web site Dell.
Also, I tried to install Windows 8 and Windows 8.1 with touchpad drivers only, but this did not solve problem.
I've recently taken delivery of an E7240 with the FHD touch screen option. I am generally quite impressed with the laptop except for one thing, the touch screen buzzes. The sound is similar to a hard disk working, a bit random .. not a constant noise. The sound will immediately stop when I put a finger on the screen though which makes me think it's related to the touch screen itself.
Rebooting etc. makes no difference... shaking the laptop, smacking it (gently) etc. has no affect.....
I realise these laptops are new so perhaps there isn't much experience out there...
We have purchased and deployed a number of Latitude E7440's and E7240's and we are running into an issue with some of the E7240's. When waking from sleep while on battery power, the machine will start to wake, the display will come back and I can move the cursor but within a second or two, the cursor will freeze and the machine will become totally unresponsive. This doesn't happen on AC. I've set the power plan to 1 minute and tested over and over again and it is reproducible every time. The only way to recover from it is to power off the machine via the power button and restart it.
Right now this is happening on the original end-user's machine and 1 other deployed E7240 we were able to get back and test. I have a couple of other E7240's deployed and I have an email out to the end users to bring them in so we can check them too.
I've upgraded the BIOS from A09 to A13. I've tried switching wireless control from Intel to Windows. I've updated to the latest drivers on the Dell support site.
Machines are i7, 256GB SSD with 8GB RAM running Windows 7(64) Enterprise
Just started using brand new Latitude E7240 and connected to E-port docking station. When booting an error pops up as below: The battery currently attached to the system will not supply enough power to dock for it to function. Please attach AC power to the dock for it to function normally
F1 - continue
F2- change setup options
The Laptop and the dock stations are brand new. This is only happening with the 7240's.
We have several Latitude E7240's on our network. They are configured with Windows 7 x64. We have been having trouble with this particular model in regards to wireless connections.
When the laptop is powered on and the user logs in, the laptop connects to the wireless network, however it is not getting an IP address from the router. It sticks at "limited connectivity", and gives itself a "169" IP. It stays that way for about 5 or so minutes then finally connects.
The WLAN drivers are already to the latest version, and to "bandaid" the issue, I have to uninstall the Wireless NIC drivers then reinstall them.
At first I was thinking it may be a router issue (Which is a Sonicwall TZ210W), but it can't be because its wireless devices of differing models have no problem connecting and getting an IP address. Also, it starts working once the drivers are reinstalled (though I'm not confident this is a permanent fix).
All the E7240's have the Dell 1506 Wireless card, and are all and originally were) on driver version 10.0.0.268, A02. Also, I have tried turned off any power management settings of the WNIC prior to the driver reinstall.
The USB ports on my new E Port II docking are not working with my new Latitude E7240 Laptop. Full configuration of the laptop is below. Talked with Dell and they sent me a replacement docking station but the same issue surfaced. Looked at the Device Manager and no extra USB ports show up when connected to the docking station. The side laptop USB works fine when the docking station is connected.
I have a Latitude E6640 and wish to use the SmartCard slot. Unfortunately there is a plastic spacer in this slot that will not come out. My software sees the firmware on the laptop so I know the hardware for this is present. How is this plastic spacer removed? Removal of the HD for better leverage is no support. It appears that the top cover over the keyboard would have to be removed but that makes no sense. If that is the case how is this done?
When I checked the battery status window in DELL Latitude E7240, I found 2 battery,Battery #1 it charged to 100% without any problem but Battery #2 is "not present",if there external battery available for this model or not? and if not, Why the battery status window showing two batteries in the settings?
This is on an M6400 with Windows 7 64-bit. I installed dell's newest drivers for Windows 7 64-bit, and everything seems to be working fine, but I don't have the Bluetooth item in Control Panel. That becomes an issue if I turn the Bluetooth radio off from the tray icon, because if I do so, the tray icon is gone, and there's no easy way to turn the radio back on.
i turned off my dell E5410 laptop during an update on friday and now it will not start up.i have tried repair but it will not repair.i also cannot restore as it does not let me into windows.