So I detailed my experience with the hard drive clicking in my blog post here, and I recorded a video to demonstrate the sounds here. Has anyone else experienced hard drive clicking in their
Dell Studios? This isn't so loud that it's clearly a sign of HD failure, but it's not so quiet that I feel that I can blow it off and not worry about it.
I've bought E6400 equipped with Seagate hard drive 250GB 7200rpm, model ST9250410ASG (free fall sensor). Unfortunetly this hdd has a "clicking noise" problem.
I've seen new firmware update on dell's support page, but it's not for this model. Is there any way to get rid of clicking?
Hadn't seen this posted yet:
Dell releases firmware update to fix "clicking noise" on Seagate hard drives
http://support.dell.com/support/down...&fileid=288150
Somebody tried this yet? I've this clicking noise too. I've called xps support 3 times already. They said they will inform me if a fix is out, but I haven't heard anything yet.
I thought maybe someone had the same problem. And have tried this fix already. Them I want to ask: does it fix the annoying clicking noise?
I am trying to find out if you guys have the same issue.
I have ST9500420AS Momentous Seagate 7200rpm 500GB HDD. Since day one I am feeling a light vibration in the laptop next to the touchpad. This is not too bad but is very annoying since it is constantly there.
For those who have a 7200 rpm Seegate drive please see if you have this issue. It is noticeable when fan is off.
I purchased a Dell Studio 15 (1557) about a month ago and as soon as I turned it on I noticed the entire bottom portion of the laptop (where the kybd and mousepad are) 'vibrated' - enough so that I called Tech Support for help. At first I thought it must be a bad fan, but after we ran through the Diagnostics and tried different fan settings, the vibration stayed. it wasnt until we put the HD to sleep temporarily that the vibration went away..
Tech Support said it was a bad drive so I had to send my laptop away for 2+ weeks (wow!). I eventually got my laptop back with a new HD installed - the exact same model - a Seagate Momentus 7200 rpm. Im not sure how the repair depot determined the laptop was fixed, because the vibration was still there.They also gave me my old HD back so I could grab any data - so I tried my old HD again to make sure there wasnt a mixup. Sure enough, both the Seagatedrives Vibrated.........................
I'm about to order the Studio XPS 16 but don't know which hard drive option to pick. Can someone please tell me the pros and cons of each?! Also how hot does the laptop get compared to a Macbook Pro (which I currently own)? Thanks!
View 10 Replies View RelatedHad the Studio since Wednesday and its great!
However, the power brick has started to make noises? A series of about 10 clicks in quick sucession repeated twice in a couple of seconds.
It will then go quiet for a while then do it again?
Its also pretty hot, too hot to touch for a while and its hot quickly - in about 10mins from cold.
Should I get a replacement or is this normal?
How do I go about getting it replacd? Sounds like its shorting or something?
My screen makes a lot of noise and it is driving me absolutely NUTS. Whenever I move or the screen wiggles it makes this clicking sound near the hinges.
I have completely removed the bezel and looked for anything that might be the culprit
My WDC WD2500BEVS-75UST0 (HDD) "clicking" in IDLE MODE.
On normal or heavy load I can't hear the click.
But in IDLE - my WDC clearly "clicking".
I used NHC and set the option "Max Performance 254" and It is fine all the time.
But I hate NHC and overall addition programs in the start-up.
I found too the HDD has jumper:
http://wdc.custhelp.com/cgi-bin/wdc....p?p_faqid=1410
To reduce "Spin UP" but I'm under warranty, and it is no option.
Any advice.It is not big deal, and I can hear it only when my HDD is IDLE but....
OS: Windows Vista
HDD temperatures: normal range - 33-35-37 C
Maximum reached: 40-41 C
The temperatures are fine by my opinion.
NO BAD SECTORS!
Did a clean install of Win7 Pro the day after I received my 1647 (see specs in signature). Updated the BIOS to A04 and received my replacement 130w adapter via courier yesterday.
Migrated my data from my old daily use machine and started to use the XPS1647 as my new daily use late last week. I immediately noticed that the hard drive tends to "click" (for lack of better terminology) on a regular basis. It almost sounds like the drive head is constantly parking and un-parking.
Note: I am pretty sure it is the hard drive causing the noise. Front left hand side next to the track pad is where the noise seems to be originating.
I have the power settings set to never turn off the hard drive when plugged in (this was my initial suspicion of what was causing the noise).
I am thinking of calling Support and just having a tech come and have a look at it. The problem is the noise seems to come and go as it pleases (ie I can't reproduce the issue at will). Of course if and when the tech comes to have a look at it and the noise isn't being produced they will just tell me I am nuts.
Are any other XPS1647 owners hearing the same thing I am? If this is indeed the Hard Drive I am a little concerned as it seems flaky already...
I have installed new Seagate firmware DE 17 for HDD with 7200.3 RPM and WEI drop down from 5,9 to 5.8
But HD tune reports still the same tests results.
Do u think that this firmware could cause performance digression.
So I've decided to upgrade from the 5400RPM WD HDD that came with my M1530 to either of the two:
Seagate Momentus 7200RPM 320GB 16MB Cache
http://www.newegg.com/Product/Produc...82E16822148336
WD Black Scorpio 7200RPM 320GB 16MB Cache
http://www.newegg.com/Product/Produc...82E16822136280
From what I've researched, the Seagate HDD is faster and consumes less power, but I've always been a WD fan and have had multiple reliable products from them. I was wondering if anyone had their own perspective on the HDDs that they upgraded on their M1530.
I tried installing the R206231 Firmware update from Dell for the Seagate drives listed on the support site and it would not complete. I get an error. I noticed that my firmware is DEA2. Is this a newer firmware than the fix is trying to update to? I noticed that the software is trying to upgrade to DE16.
I own a ST9250421ASG in a E6400.
I have a Dell Inspiron 1545 and I want to upgrade my hard disk. I am thinking to buy a Seagate Constellation 500gb but I am not sure if it is compatible with my laptop.
I read somewhere that it is a SAS drive and that you need a compatible motherboard in order to use it, but I couldn't find anything else. Here is a link to the drives webpage.
As this HD was often recommended in Internet forums as a replacement for the built-in Fujitsu 60GB, I bought it and tried to make it run today.
Unfortunately, the HD is not recognized.
I used Acronis True Image to copy the contents of the old HD onto the new one, but in Bios only the value for the old HD appears (58GB).
I removed the battery, I tried all kinds of boot-ups to no avail.
So i bought a Seagate 250gig hard drive for my d600 and i cant seem to make it work.
It reads after the dell symbol comes up and then it says that there is no primary drives found and no bootable devices found.
And when i try to run the diagnostic it says the same thing. What am i doing wrong?
I bought the hard drive from Office Depot and the guy didnt tell me about any drivers that i needed to buy or anything.
I have a 160GB 7200RPM with Free Fall Sensor harddrive and the unstoppable clicking of my Seagate hard drive is driving me nuts. so I have three choices:
I have my 160GB Hitachi 7200 RPM Hardderive from my old system that i can strip off before is end back to dell. This hd does not have free fall sensor.
They are sending me a Fujitsu 160GB 7200 RPM one that has FFS.
My HDD is performing badly and according to SpinRite I'm looking at 900+ hours of scanning/repairing.
Thus, I'm thinking of buying a new one. However, having one of the earliest Vostros that isn't SATA II, I'm wondering if I buy a SATA II drive, will it still be functional?
What is the best 500 drive currently available? From a performance/noise/etc... I plan to use it as a 2nd drive (OS drive being 128SSD)
Per another post -thx Boo- Newegg has the Samsung on sale but how about the WD or Seagate.
Can folks share their experience with the 3 500's that are out there.
[url]
Thinking of more storage on a 1710 with 100GB,
Choice is Western Digital Scorpio Blue 500 GB
5400 rpm or Seagate Momentus 7200.4 500 GB 2,5 S-ATA 7200rpm. Is the speed noticable on these two
I have a DV5-1010EF and I would like to replace the original 250GB HD with a 500GB, and go up to 8GB RAM.
View 4 Replies View RelatedI currently have a 320GB Hard Drive. I separate it into 2 separate partitions of 64GB and the rest on the other.
What will happen if I were to get a new HD and I want to transfer everything over?
Basically, I have MacOSX and I want to install W7 in a separate partition of about 64GB or maybe less.
I want to upgrade to 500GB HD, and keep all the info and data I already have on my current HD.
I'm guessing the best way to do this is to just reinstall mac OSX and W7 and transfer the files over? What about programs?
I already posted this in the "what notebook should I buy?" forum however, I apologize, and I realize it belongs here.
What is most important for me which ever one causes less heat.
does it support the SATA 3.0gb/s hard drives?
looking at these in particular: ...
I am trying to decide between the following 2 Z's which are approx. the same price.
Intel Core 2 Duo P8700 2.53GHz / 4GB RAM / 128GB SSD / DVD±R/RW / Hybrid Graphics / 802.11AGN / WWAN / Bluetooth / GPS / Webcam / Windows 7 Professional [ SON VGNZ880GB ]
Intel Core 2 Duo P8800 2.66GHz / 4GB RAM / 500GB HD / DVD±R/RW / Hybrid Graphics / 802.11AGN / WWAN / Bluetooth / GPS / Webcam / Windows 7 Professional [ SON VGNZ850GB ]
I do everyday tasks like MS office,MS Streets, and use approx. 10GB for my multimedia files.
My first question is, will I notice the difference in speed? Will be the SSD with P8700 faster than the HDD 5400 RPM with P8800 in terms of boot,read-write documents etc?
If I go with the 128 GB SSD, how much free space can I expect to have on the drive after W7 ?
I am about to upgrade my laptop HD from 320GB 5.4k RPM to either 500GB 7,2K RPM or 750GB 5,4K RPM.
Which one do you think I should get?
Will 7200RPM will give noticeable different in speed compare to 5400RPM ?
How much in % do I get improvement in speed?
I am planning on upgrading my stock 120GB to a WD 500GB 5400RPM HDD. Because of SATA limitations on my 2007 MBP, it has transfer rates of 1.5Gb/s and not 3.0Gb/s. I was told that HDD's do have firmware or jumpers that can use 1.5Gb/s.
I've seen alot of members who have used this HDD, but I'm not sure if you guys have 1.5Gb/s or 3.0Gb/s transfer rates and whether or not it will work with this HDD. Can you guys clarify this issue for me?
I ask for suggestions in choice between 500GB HDD(7200rpm) or 256GB SSD?
View 5 Replies View RelatedIs it noisy? ...fans - hdd and so on
How long time does it take to boot up? or start up
Do you recommend it, for scool and such
the specs are Intel Core 2 Duo SU9400(1.40GHz) 13.3" Wide XGA 4GB Memory DDR3 1066 500GB HDD Intel GMA 4500MHD
The 14" model, does that only have solo cpu's , if so im gonna buy the 13", since it has SU9400