I have the Inspiron 1525 which I upgraded to 2GB of ram (not much but runs smoother then the original 1GB I had). As for the 1 problem formatting will not fix it's the AC Adapter which it will not recognize.
It's the original that it came with aand it runs with the battery pulled but will not Recognize the adapter and thus charge the battery. Will that problem get fixed if I ever get it formatted? .....
ok so i hv this problem with my dell xps m1330 that it wont charge the battery. and when i turn the laptop on, it gives me message that tht AC adapter can not be recognized, and that the battery may not charge.
i tried reinstalling windows but it still didnt help :S. so i called Dell technical support and talked to this guy for 40 mins, he told me a bunch of stuff , like reseting stuff in BIOS etc. but it didnt work. so at the end he just said to send the laptop for repair.
Even though i still have the manufacturing warranty, but i CANT send my laptop in for repair, bc i really NEED it for my university. And also he wont agree to send me a replacement laptop or anything.
so i really dont know what to do. i know there are alot of experts here, who are way better than dell technical support team. so does any one has an easy way out for this problem
Recently ran into an issue with the AC adapter not being recognized despite being the original cord and no longer charging the battery. No issues with light on cord flickering or turning off. Purchased a new power cord anyways but problem persists. BIOS shows unknown type for Ac adapter even after BIOS update. Diagnostics scan doesn't detect any problems. URL....
why this occurs and if there is a workaround or repair to re-enable the charging? It appears the laptop is just disabling the charging circuit despite being provided the correct power.
I have a DELL XPS 1530 Laptop, a few days back my 90W AC adapter stopped working and beeped continuously and the green light also didnt turn on. I gave the adaptor to a local electronic shop to get it repaired .
After getting it repaired I plugged it to the laptop and it charged normally upto 48% and after that the battery did not charge. Then on reboot a message is being display that "
The Adapter wattage is not recognised please connect a 65W DELL adaptor"
I have this "problem" (is not actually a problem but I would like to know what the problem is) I have a usb wireless adapter since my laptop didn't come with a wireless card built in.
Its working fine but there is something that bothers me, I have 3 usb ports and one of them doesn't recognize my usb wireless adapter!
I don't have problems with the other two, I just plug it in and the system connects to the internet. Its just one usb port that does not recognize it.
Wondering if anyone else is having this problem with Dell.
I bought an Inspiron 1500 14 months ago. Early on I noted that the adapter dell sent would sometimes slip out if the laptop was touched.
Then at 6 moths I started getting a message on power up -AC adapter wattage & type cannot be determined.- 2 weeks later the battery was drained and the system wouldn't recharge it .....
All of the sudden the battery stopped charging and the official dell AC Adapter, that shipped with the laptop, is listed as Unknown in the BIOS. I understand this happens because somewhere on the way the info from the pin that (for no good reason) identifies the AC adapter does not reach the charging circuit. This is supposed to be a safety mechanism (that no other manufacturer uses) that is obviously just an attack on off-brand chargers .The laptop is working fine (except for charging) as long as the AC adapter is connected.
What I did so far:
notice I'm out of warranty
try different power outlets
try different AC adapter
Check battery health (it's fine)
replace Power Jack
Voodoo
I have been able to install most all of the missing drivers after my new OS install.......
The only problem I'm having is the wireless adapter is not recognized in device manager. There is a "network controller" that has no driver. I have installed the broadcom driver from acer site, but it won't work.
When I press the wireless button, it will toggle between wlan enabled, and wlan disabled, but I can't figure it out
There is a recurring problem where the computer ceases to recognize the existence of the wireless adapter. It doesn't matter if the computer is running 8, or 8.1, nor if the computer is fully Updated. This seems to be a hardware problem or some sort of electrical short, not a driver problem. I have done a bit of research over the last four months or so (when the problem first started happening), and the problem I am experiencing is most likely caused by either a faulty card, or a card that is loose from its socket on the motherboard, and not by a driver/hardware discrepancy.The strange part is the intermittent nature of the computer's recognition of the device. Stranger still is that despite what appears to be a hardware problem, I have usually been able to fix it, either by:
Uninstalling then reinstalling the device's drivers,Restoring the computer to a previous point,Reformatting the computer using the built in Windows 8 feature, and/or Removing certain Windows Updates in reverse chronological order (until the integrated WiFi device is recognized).
Last night, the problem happened again. It was maybe the 4th or 5th time overall, and the 2nd time I was forced to "hard reformat" in an attempt to fix the problem. Until just a few minutes ago, when I partially deconstructed then reconstructed the device, the "hard reformat" method didn't fix the WiFi. After the "hard reformat" didn't work, Upon turning the computer back on, it recognized the wireless adapter, I connected to the network successfully, and here I am now, documenting what happened.
I essentially did nothing significant to the device, and now the wireless adapter is recognized. Why?
All that being said, I believe I have narrowed down the cause of the problem, at least in my case. I believe there is some sort of electrical short issue. The short is caused by one (or perhaps both) of the following:
Assuming the physical location of the wireless adapter is next to the location of the port for the AC adapter, I think the AC adapter, when moved or jiggled by a hand, somehow negatively interferes with the wireless adapter, causing it to fail.Shutting the lid of the computer, perhaps when combined with the above, and/or under other conditions (something having to do with power settings?, something having to do with the state of the network when the lid is shut?), causes the network adapter to fail.Something very similar used to happen on an old Dell notebook I had, as well as on a CR-48, towards the end of their lives. That is, in order for the internet to work, I had to have the AC adapter at certain angle when it was plugged into the computer. Otherwise the wireless connection would drop. It seems like there's a connection there (pun intended), but perhaps not?
I just got a W540 running Windows 7 x64 at work. I have an ExpressCard ethernet adapter (A Belkin f5u250), and I'm having trouble getting it working.
I used this card on a W510 running Windows XP for years with no issues. I can still plug it into that laptop and have it work just fine. However, when I plug it into the W540, nothing happens. Windows does nothing. It doesn't act like it's trying to identify hardware, go find drivers, or anything. Nothing shows up or changes in the device manager, either.
I've tried doing the "add legacy hardware" thing in device manager, but I've had no luck with that, either. If I do an autodetect, it doesn't find anything, and if I manually browse to the driver, it then brings me to a list of devices, and the list is empty.
Is there something special I need to do to enable the expresscard slot, or enable plug and play for it, or something?
i bought a dv6-1054cl and it came with Vista Home Premium on it, now i'm thinking on upgrading to Windows 7 and as you all know there are 2 ways, an update install or a clean one. I have burn the recovery dvds the same day i got it. Now i want to know if i do a clean windows 7 install, with those discs i can install whenever i want vista home premuim and it's going to be like when i bought it (with al the hp stuff and more).
Do i lost my warrany doing that?
You people what can you recommend me, should i make the step to 7 or i should stay with vista for at least the year of the warrany?
Anywhere i can download all the software i have preinstalled on my laptop?
Basically, I got a new phone that has 360 x 640 pixels, 3.7 inches. It can play all the video formats. I have a set of workout videos I want to put on the phone.
The trick here is, I want the videos to take up the least amount of memory and be still be viewable, meaning I don't need it to look the greatest but the size should just be big enough to be watched, and doesn't lag, doesn't need the greatest audio quality either.
So I am using the Prism app, is it any good? Should I use another app? What video format would you suggest to save memory space? What output options would you suggest to save memory space yet viewable? Ex. Pixel size, audio format, etc...
Better yet, is there an APP that strips the audio from the video, so I can just listen in.
I'm thinking about formating and installing fresh, I have read the Out-Of-Box guide. But I have a little doubt. After installing OS, which drivers do I need to install. I mean, like there are two drivers available under Graphics for my laptop(HP dv6-1387tx). Similarly, for other categories like Network, there are more than one drivers listed. Which one should I choose? Should I install all under the categories. Since, I selected the exact model, all should be applicable to my laptop. Here's the link to all drivers and softwares -
[url]
My girlfriend gave me a brandnew Aspire Timeline 1810TZ with build in G3 (UMTS) for Christmas. When i played around with the preinstalled system (Windows 7 Home Premium x64), I could use the hardware switch in the front of the chassis to enable/ disable the build-in G3-Module.
But as you know, the preinstalled OS are normally very slow, so i formatted the System and installed Windows 7 Professional x64. After installation of all drivers from the Acer website, the switch for enabling the G3 didn't worked anymore! I reformated again with Windows 7 Home Premium x64, but there was the same Picture: No, response from the G3-Switch.
The funny thing is: G3 and WLAN share the same physical hardware switch (you have to flip it to the left to enable/disable G3, and to enable/ disable WLAN you have to flip it to the right).
Flipping the switch to the right activated WLAN without any problem!
I have no idea how to fix this (tried every driver i could find).
i'm having performance issues with Gears of war. I can play "Maxed" at 1920x1200, plays around 29-40FPS, very smooth during firefights and all. But when I move around it pauses severel times, and my 2.6Ghz Merom at 100% of both cores! It also happens when I switch everything to low, people with the cheap 2.2Ghz could run this game at medium-high.
View 15 Replies View RelatedJust installed the 186.03 nVidia driver on my M1730. Then tried to view a movie and it took forever to load (mkv/avi/mp4). I have seen a couple of people bashing the 186.03.
I am now wondering what the optimal driver(s) are for my SLI config of 8800GTX.
My other question is how do I uninstall the previous drivers in a correct matter?
I own a Dell Inspiron 1525 and I've had it for almost a year. Now the "H" key is giving me a bit of trouble...
it still works...but I have to press down harder on it for it to work...which makes me type alot slower.
Has been soo long since I post anything on this great forum! I appreciate everyone's time here, and thank you all for taking some time to help me diagnose this problem. Anyways here is the problem:
I bought a "broken" Dell M1210 from ebay. The cosmetics of the laptop looks very good: no dents, few scratch marks, and almost no blemishes. It did not came with a hard drive, only an AC adapter.
Currently, I am trying to transfer ownership to me and will be trying to buy warranty for my m1210 once the transfer is complete. My m1210 is a little more then 1 month out of warranty coverage period.
I have completely disassemble the laptop and examine the motherboard, it looks and smells new. Internally, everything is very, very clean. The motherboard model of mine is HN110, the one that has the geforce 7400gs in it.
However, the batter is bad because it holds no power. I have tried on my friend's m1210 and checked it through Dell utilities and it gave a thumbs down.
I cannot confirm if the LCD, speaker, sound card, processor, system fan, heatsink, and camera are fine, or not.
I am able to confirm the ram, wireless card, and the CD drive are perfectly functional. I have yet to test those under performance conditions.
The main problems is:
I am unable to turn on the laptop.
I have tried 5 different adapters: 2 Dell m1210, 1 E1705, 1 E1505, and 1 Targus universal adapter. All of them do not work on the laptop.
When I plugged a Dell adapter into my m1210, the AC adapter shuts off. The green light on the Dell AC Adapter shuts off.
I tried my friend's charged battery to power up my laptop;however, my m1210 still will not power on.
I have not find a way to test the circuit board on my m1210 and my friend is very, very wary of me opening up their laptop. So anything that involves me trying different parts on his laptop will be almost impossible for me to ask for, he is a noob.
My Dell XPS 1530 can operate using an iGo everywhereMAX laptop adapter with the 202 tip, but it will not charge the battery, even when the laptop is a sleep or powered down.
View 7 Replies View RelatedNow for a few days my Vostro 1500 gives me message that power adaptor isn't recognized by DELL ...
and so on. But I didn't change anything this is original power adaptor from the box.
I've got a problem with a brand new SXPS 1340, and I can't figure out if the trouble is in the hardware or the software...
On Vista, the wireless keeps dropping out and loosing connection... or fails to establish connection. This laptop is the only computer in my network that's affected; all other systems run fine (including a really OLD Dell laptop with an equally old external MS WiFi card... oh, the irony!).
Also... you know how when you search for WiFi networks it takes a while? Well, when it starts to go haywire, it seems to search for networks instantly, as if the card were off.
But what makes me think this is a software issue, is the fact that when I installed Windows 7, the WiFi worked flawlessly (and seemed to have better signal strength) with the built in drivers... and went haywire AFTER I had installed the drivers from Dell's site. (I'm in the process of confirming this right now; setting up W7 again and I'm going to run a "ping router /t" for a while.* )
I was getting frustrated with my external monitor because the screen color was turning dark purplish at times, so I went into Device Manager and deleted both default monitor entries instead of just one under Monitors in hopes that it would've gotten rid of the purple haze so to speak.
I tried unhooking the monitor and unplugging everything before I deleted the default monitor entries in Device Manager, but it didn't get rid of the purple screen.
I have a fairly old notebook Dell Inspiron 4000 with WinMe installed and the display is no longer working assumed due to a bad or broken LCD, which is why I'm using the external monitor.
The external monitor has been working fine for months until it started turning purple on me when it was being used with the notebook. When the monitor is hooked up with my desktop, the screen color is just fine.
The notebook has got a lot of storage on it. During the boot process on the notebook, the external monitor lights up at one point (no longer purplish), but goes blank/dark after a few seconds and says it no longer is getting a signal from the notebook
I just bought a Dell Wireless 370 for my Latitude E6400 and installed it. I have Windows Server 2008 Standard x64 installed on the laptop.
I tried to use the bluetooth drivers for Windows Vista x64 (for the Dell Wireless 370 and downloaded from the Dell Support website),
but for some reason they don't work. There are the following three unknown devices in my Device Manager: MS_BTHBRB, MS_BTHPAN and MS_RFCOMM
So i bought a Seagate 250gig hard drive for my d600 and i cant seem to make it work.
It reads after the dell symbol comes up and then it says that there is no primary drives found and no bootable devices found.
And when i try to run the diagnostic it says the same thing. What am i doing wrong?
I bought the hard drive from Office Depot and the guy didnt tell me about any drivers that i needed to buy or anything.
ive been having hard drive trouble where it says hard drive failure iminent. but I don't think that's my problem. My internet lags so bad on my aspire 5100, like when im trying to watch a streaming video it loads 3 seconds then stops, loads 3 seconds then stops. But when I plug my wifes dell laptop or my desktop into the same connection theres no lag at all. Would this have anything to do with my hard drive?
View 5 Replies View Relatedthis evening she shutdown out of the blue. i figured it was odd and turned it back on and what a surprise i got.
grey, red, blue and white pinstripe vertical lines across the entire screen. i watched it for a time and it took a few seconds but i noticed that in the lower right hand corner it was more faded then the rest of the screen.
then the fade began to grow the grow before it encompassed the entire screen. the lines were still there but the screen was much lighter. it almost looked like celluloid was burning through on an old projector.
i shut it off, let it cool for a few minutes and tried it again.
this time the top 4th of the screen had the white lines and below that it was simply black.
she's never been dropped. never had a spill. so i figured id do some searching and this does not seem to be a common problem.................
I bought a new ext. harddrive (Verbatim 3.5" 1TB QUAD INTERFACE) in order to connect it to my laptop (Acer Aspire 5930, Win Vista, SP1) via eSATA port. However this does not work at all. The computer simply does not detect the hard drive. The same trouble appeared when i tried to connect the drive to another machine, so it is possible its simply broken down. But the USB connection works pretty well.
View 8 Replies View RelatedI have a Dell Inspiron 1520 and my friend has a Latitude D820.
Tonight she accidentally plugged my power adapter into her laptop. A few hours later, she noticed that her laptop indicated that it wasn't plugged in, and that's when we realized that she had accidentally used my adapter instead of hers.
Now my adapter doesn't work at all. We've tried the adapter with both our laptops with different outlets with the same problem, so we know it's the adapter. The green light also doesn't come on when it's plugged in anymore.
Did plugging my adapter into her laptop somehow screw up my adapter, or could this just be a coincidence? Is there any way to fix the adapter or at least figure out what the problem is? And if I have to purchase a new adapter, do the universal ones they sell at retail electronics stores work OK? I would order one from Dell but I'm working on a project now and I don't have time to wait for it to ship.
I have a HP pavillion A10-5750M
Model- 15-e084ca(windows 7 ultimate)
I recently changed my window from 8 to 7 ultimate and i noticed my grahics adapter has changed from AMD radeon 8650G to standard VGA graphics adapter. Why is that and how do i change it?
i can get so windows xp will recognize the 128gb ssd hard drive on a fresh install.........
View 3 Replies View Related