One of my USB ports has stopped working. Yesterday it worked fine. Today I turned on the computer and it doesn't work. I've tried multiple USB devices in each port - in one port all devices work fine, in the other nothing happens. (I.e flashed BIOS, updated chipsets and drives): URL...
View 1 RepliesAfter upgrade to 8.1 HDMI port didn't work. Followed instructions to correct BIOS and graphice driver; HDMI works - however Silverlight no longer working with DMS.
Get error 6036 in Silverlight which is Graphics device's driver certificate is invalid
Have checked graphics driver and is all up to date
Machine is HP Pavilion 11 x2
Graphics driver version 10.18.10.3366
I found one of my laptop usb port is not working. The left usb port is not working and the right one is working. Don't know which port represent which version (2.0/3.0). I found universal serial bus driver is not installed. I can not find the driver so request you to provide me the link. If the driver is R309557, I already downloaded it. My bios version is A05.
View 1 Replies View RelatedHaving a problem with one of the USB ports on my XPS14z .. Port is the one adjacent to the HDMI port..
There is absolutely no signs of life from it at all, regardless of whether I connect USB 2 or 3 devices, usb drives etc. I've tried updating BIOS and CHIPSETS to absolutely no success.
[URL] .....
and also checked device drivers are installed as per
[URL] ....
but again no success. It cannot be seen in device manager or when I ran a diagnostics suggesting the whole thing is dead.
I have an XPS 14 Ultrabook. I did a clean install of Win 7 Pro (from windows 8). The USB port (one with powershare) closest to front of keyboard is not working, the other USB port is working.
Did I miss a driver? If so, which one. Unfortunately, I was working on the driver install at 3am and didnt take as good of notes as would have desired. I dont see any problems when i open device manager????
My HDMI port does not work. I have a N7010, 17R. I tried downloading other drivers but nothing seems to work. Is there a way to tell is it's a mother board issue or driver issue?
View 7 Replies View RelatedGot Alienware M11x R2 about 6 months ago
Spec:
CPU i7
Ram 8gb
HDD 320 gb
She has been using the HDMI port to connect an external monitor at home, but now it's not working anymore.
I tried to use different cable on different monitor, and they seem to have the same problem, it' displayed " no signal" and the laptop can't detect the display also.
It works when I connect on the Display Port.
When I plug my M4400 into my TV via DisplayPort->HMDI, the video and audio play fine on the tv.. However the video and audio also continue to play on the laptop. The video is no big deal-
I can lower the lid, or point it in a different direction. But the doubling of the audio through the laptop speakers is a serious pain .....
So I've just got a e6400 for e-port plus.
Is it possible to have two external monitors AND the laptop display all running at the same time? If so how?
Even better would be this: I have two external monitors - both vga with no DVI (oh well). Can I get this working?
I used to use my eSATA port every day with a few different devices. I started to have an overheating problem, so Dell replaced the motherboard and graphics card yesterday.
Of course, that means I lost all my BIOS settings. I'm pretty sure I have them back to where they should be (RAID mode on the SATA controller, eSATA port enabled), yet the eSATA port doesn't see a damned thing connected to it.
Every other piece of hardware is exactly the same as it was before. Any ideas as to what I might be missing?
Windows 7 32-bit upgrade CD (not SP1), from XP. no anti-virus yet. Windows Updates current to SP1.I have always had my DELL mouse plugged in to rear port, but for unknown reasons it is now dead to all USB devices?
Mouse is now recognized by side USB port, but I like to keep them free for bulky flash drives..I tried uninstalling all ports/refresh from Device Manager, but rear port is still dead to all USB devices.I then tried a repair install from desktop, but still dead (1st time HD light flashed for 1sec, then nothing from then on).
My laptop model is HP Pavilion g4 2235dx. I use windows7 32-bit. It has 3 usb ports. It contains one usb port it's right side & two others contain it's left side. In this way right side usb port is working properly but two others usb port of left side is not working.
View 2 Replies View RelatedI bought HP pavilion 15 - N259TX with windows 8. today after installinf windows 7 ultimate my USB 3.0 port stopped worki g. I even downloaded the driver from hp site.
View 4 Replies View RelatedThe USB ports on my new E Port II docking are not working with my new Latitude E7240 Laptop. Full configuration of the laptop is below. Talked with Dell and they sent me a replacement docking station but the same issue surfaced. Looked at the Device Manager and no extra USB ports show up when connected to the docking station. The side laptop USB works fine when the docking station is connected.
Computer Model Latitude E7240
Shipping Date 11/16/2013
[Code] .....
The port worked when i got the computer, its been two weeks now and when i plug in the hdmi cable into the port nothing happens. It doesnt show up on the tv and now im stumped,
View 6 Replies View RelatedThe left side usb port appears to have fallen into the laptop case. It is rattling around, visible and does not appear to be connected to anything.
View 1 Replies View RelatedI would like to know if the HDMI port on my B570 laptop is an input or an output port. I would like to use my laptop to play games from my ps3 three system so that the tv can be used by another member of my family.
View 1 Replies View Relatedi have HP 2000 notebook and all of a sudden HDMI port stopped working. Factory restore and a chipset driver worked and it started working. my bad, i installed a graphics driver, that took me back to sqaure one. HDMI port on the laptop is not working. HDMI cable and TV HDMI port is all working.i ran HP support assistant and it shows all required updates are in place. though it worked in between, it should be an issue with the chipset driver.
View 2 Replies View RelatedI buy this wonderful notebook with win 8.1 , all works fine, but... the hdmi port seems is not working... nothing appens when i plug the hdmi cable... the tv doesn't recognize the pc... i don't think is a broken port, i think some driver or bios misconfiguration... My video card is the intel 400, i have latest updated driver..
[URL]
Really cannot i use hdmi ouput because bios doesn't support it?? in 2014?? i can't believe it..
I have a dell vostro 3350. On windows 7 the sd card and usb 2/esata port work as expected.
On windows 8 they dont. If i install the latest drivers, they work until i reboot the laptop after which they are back to not working.
Is this laptop just not Win8 compatible?
The 2 USB port on the left hand side of my HP pavilion g6 not working after i formatted my system, it does not detect any devices plugged in these two ports, the operating system before was window 7 home premium but now it having window 7 professional, what can i do?
View 4 Replies View RelatedThe touchpad and USB 3.0 port on my E5-551-89TN with windows 8.1 has stopped working. I have downloaded both drivers and installed them again but both arn't even showing up in device manager. I have updated all drivers includeing the BIOS but they still are not being detected by Windows 8.1.
View 1 Replies View RelatedI have this model
HP Pavilion dv6-6155ee Entertainment Notebook
Today i have found that when plugging the mouse in one of the USB ports on the right side .. it does not work but the mouse gives light .
I tried it on the USB Ports on the left side .. it works well ...
I bought my lenovo G460 with nvidia M310 (with hdmi) this year and have not been able to get the hdmi port to work.
I have two lcd displays one in our lab and another one at home (LG 2361V-PF) which have hdmi connections in the back.
In the beginning I was able to get my notebook to work on the display in our office. However, now both displays (work+home) are not working.
I have tried to reinstall latest nvidia drivers as of 2010-11-02 (ver. 8.16.11.8990) from lenovo, completely restore Operating system and tried different hdmi cables.
I have even tried to use original drivers and also downgrade that to a lower version all with no luck.
I have even taken my LG LCD display to the LG After Service Warranty office and have found no issues wrong with the Monitor itself.
I am sure I have taken all the trouble-shooting methods into consideration so a simple question is... Is the hdmi port defective?
When I connect my laptop to the TV using HDMI or RGB port, picture is not completely fit to the screen, task bar is hiding at bottom. I trying to change settings in Screen Resolution or Intel hd graphic properties, problem does not fixed,
ideapad Y480: Intel Core i7-3610QM 2.30GHz, 6.00GB RAM
Intel HD Graphics 4000 + Nvidia Geforce GT640m LE
750GB HDD, Dual Boot: Win8.1 Pro with MC 64bit and Win7 Ultimate 64bit
my question is about the empty mini-pcie slot inside the 5102wlmi. I plugged in a sprint novatel e725 wwan card, but windows doesn't detect anything. Is there a modded bios that detects it?
View 6 Replies View RelatedI have a ThinkPad X240 laptop with Windows 8.1 Enterprise x64 installed. Sound plays just fine from the laptop's speakers, and when I plug external speakers into the laptop's 3.5mm audio port they work just fine too. when the laptop is docked in my Ultra Dock 90W docking station and the external speakers cable is plugged into the dock's audio port, no sound is heard. If I'm playing music through the laptop's speakers, as soon as I plug a cable into the dock's audio port no sound is heard. I can still use the laptop's audio port to connect external speakers, but that defeats the object of having an audio port on the Ultra Dock.
The Ultra Dock has (I believe) the latest firmware installed (version 2.22.000) and I have the latest audio drivers installed: in Device Manager > Sound, video and game controllers > Realtek High Definition Audio > Driver version is 6.0.1.7188 which is the latest available from Lenovo Support downloads. What do I need to do to get the Ultra Dock's audio port working? I mistakenly posted this message on the "X Series tablet ThinkPad Laptops" board.
what COM port my serial port is on my XPS M1710. Is there a program that I can find all this out in Windows that I just never knew about?
View 12 Replies View RelatedThinking about getting one to go with my m4500 which is on order. Reviews seem ok though some complain it's bulky and other complained the release mechanism wasn't great. Worst was that someone said their comp wouldn't boot when docked.
Can anyone share experience and/or high res pics of what one looks like?
Here's my story and, let's say, my analysis:
I bought a generic 2 HD sata2 RAID1 enclosure based on the chipset Silicon Image SteelVine 5744. It can be used in USB or eSATA2. This embedded chipset (named SiL5744) is known (understand "claimed") to auto-handle Sata I/II and host sata2 controllers that not support the port multiplier feature. The HD are two Samsung F1 1To. There's no jumper to rollback to SATA 1.5Go on them, you can only do it by flashing the HD's bios, however we don't need to do it as I wrote just before, the SiL5744 supports SATA 3Go natively.
The enclosure works pretty well with USB, but *not* in eSATA : the E6500 freezes/hangs just after the POST step (a potential driver issue with the installed vista 64bits is not the reason then). As soon has I disconnect the eSATA cable, the system recovers and continues as normal.
What I've tried/done so far :
Both E6500's BIOS SATA mode AHCI and IRRT mode were tested,
Intel Matrix driver and software was updated to the latest 8.7.0.1007 version (AHCI and IRRT),
The SiL5744 chip was upgraded to its latest firmware as well (in case of...)
In order to verify the esata cable, the HDs and the enclosure itself, I succeed to :
- Use the enclosure's RAID1 feature when using the USB connection, I could partition,format, and read/write on the logical volume
- directly connect *one* HD (Samsung F1 1To) to the E6500's esata port -(I have a sata2esata cable), Vista installed it and I was able to use it as normal, even the hotswap feature seemed to work fine (I unkindly removed it). I could so test both HD individually this way... On the enclosure hardware side, everything looks fine then.
An IMPORTANT thing : The E6500's ICH8/9-M sata host controller seems to support the Port Multiplier feature *ONLY* on sata port 0 -as a bubble message from the Intel Matrix soft sometimes shows up-, but this is exactly where the internal HD is plugged on the motherboard I found nowhere you can change the internal sata port ID (switch,bios,ect...). I think this is the key of the problem that seems to be a dumb port conflict, because the esata port is in fact the port sata 4 (the DVDRW drive is sata 1, dock's esata is 5 for instance). If somebody knows how to swap the sata port ID, I think I won't be toasted !