I am buying a XPS m1550 and I can't decide which screen to get. Should I get the LED or the HD 1920 x 1200 display.....That 1920 display sounds good as I like having lots of windows open...on the other hand LED is better on energy and I have heard a nicer looking screen to view....
View 15 Repliesa lot of folks think it will go to 16:9. Will it go down to 1920 x 1080 for the next version of macbook pros 17 inch?
Or will they keep it the same?
The only other alternative is a higher resolution 20x11 or so I forget the exact number
I am thinking about getting either the M1550 or M1330. I've read all kinds of online reviews, looked at specs, etc., ad nauseum.
What I am looking for in this post is USER OPINIONS from those of you who actually own any of these laptops and have used them for a while now.
Basically, I want to use it for entertainment (cd/dvd burning, movies, iTunes), productivity, net surfing, and some occasional gaming (desktop covers that base for me).
This was a donation to our kids konnect program. I need to do an assessment but can't get beyond an error message. It doesn't recognize an "ultrabay" and wants me to remove and reinstall it
View 3 Replies View RelatedI'm looking for a good screen for watching Blu ray on.
How good is the 1920 X 1200 screen?
Can anyone say how it compares to the XPS 16 1080P and 720P screens?
Just a little concerened with the reports about the heat generated by the XPS16.
opinion on the FW 1920 X 1080 screen option?
Its becoming available on the Fw31ZJ in the UK and I would like to know how good it is compared to the alternative 1080P screens (dell Studio XPS16, HP HDX 16)
I am going to get an xbox 360 in the near future along with a vga cable to play it on my E1705's monitor. The monitor's native resolution is 1900 by 1200 so I was wondering if anyone has tried this before and if the 360 will look good on my laptop's monitor.
View 15 Replies View RelatedThe laptop has no AC adapter and a dead battery. I could test the laptop to see if it is working with a non Dell adapter if I was sure of the polarity on the Dell. There are three short dashes under the connector but no + or - symbols. Does anyone know if this laptop has a center pin with positive polarity?
View 4 Replies View Relatedreceived the new Z 7 days ago, great is just a great little notebook, the best i had (coming from an SZ premium).
The only thing that is killing me is the auto brightness, the resolution is the 1920x and in dim light the brightness is going down, after 1 hour my eyes are red. The only thing that i can do is putting the lamp directly on top of the keyboard so the sensor adjusts the brightness to the maximum level.
What can i do? I can't find a way to turn down the auto brightness....
I am planing on buying a Sony Vaio F or FW.When I saw a Sony Vaio FW in Full HD in a store, I felt it hard to read text on it as my eyes started to hurt and I felt it was too bright.Is it just me ? or is it something you get used too ? Are there any improvements in the display of Sony VAIO F ?
View 10 Replies View Relatedhuge threads dedicated to new Vaio Z (and read more than half of them) but couldn't find any useful information about 1920x1080 screen. I saw 1600x900 model in store and wasn't impressed at all (TN simply can't get better than average IMO)
Is there any information about panel manufacturer/type? Does anybody have proper pics showing its viewing angles (comparison with 1600 model will be even better)?
Don't post about resolution/DPI scaling/small fonts, this thread is devoted to panels' quality only.
This 1200 was working several weeks ago, now it will not turn on even with AC adapter plugged in. Battery will not charge.
No green LED lit on laptop front. Unit will not boot with AC adapter attached and battery removed.
Checked AC adapter with multimeter and it appears working OK, get 19.5 volts dc output.
I'm looking into buying this laptop. Certain online websites, such as Acer's, have said that it's maximum resolution is up to 1920 1080, but I am not sure if this is true for all model of the 6930. Other websites say that it only goes up to 1300 something.
View 4 Replies View Relatedif anyone who has an HDX 16t-1200 could tell me what their system board ID is. You can find this out by going into your system BIOS on the main info page on the front it lists your system board id.
View 10 Replies View RelatedThis is an old notebook. A Compaq Presario 1200 Series notbeook (1200 XL-101). When I plug in the power cable, the LED lights up, indicating it's plugged in - however absolutely nothing happens if I hit the power button.
I have tried this with or without the Battery in it. In the past this notebook was able to turn on WITHOUT any battery in it if it was plugged in; being directly powered by the power cable.
Does anyone have any input one where I can begin to fix this? I don't want to bring it in to a shop; I'd rather fix it myself. I'm handy with hardware so I can open and replace parts. I just don't know what is wrong with it.
my HP dv7-1200-cto .the battery is in on 4% but it said plugged in and not charging and i tried everything and the problem still there.
View 6 Replies View RelatedI'm looking to replace the motherboard on an old Compaq Presario 1200 XL-101 notebook. The part number for the motherboard is 169606-001. I'm looking for a cheap or refurbished one so I can get it fairly cheap ... under $50. The new ones across Google are way too expensive ... and I only found One Broken on eBay.
View 3 Replies View RelatedI have just taken delivery of my Yoga 2 pro but I am struggling with the setup and cannot get a proper duplicated screen using a Kensington 3.0 Superspeed dock. The Yoga has a resolution of 3200x1800 and my spare screen is a BENQ G2420HD at 1980x1080.
I have already ordered a screen and a dock to replicate this setup in a foreign country and the kit is on its way including a second Yoga 2 pro!
My HP Pavilion dvr-1200 CTO Entertainment Notebook PC has a huge problem. It will not display anything other than a set pattern of rotating block colors -it goes from red to blue to green to a shadow sort of grey with vertical lines, each lasting about ten seconds, than repeating over and over. You can hear the computer starting up, and you can get it to the start page by knowing when to press enter and when to scan your fingerprint; this is as far as I can get without seeing. I've had the problem for about two months; the unfortunate thing is after about a week, I decided to hook up a external monitor to it, and got a full picture, with everything but the screen display working great. Unfortunately, in excited haste, I decided it had to be a graphics driver issue, which would just mean an update or a completely new set of drivers. Great. But I accidentally deleted the drivers I had before I uploaded new ones, and the external screen I was using went blank.
View 1 Replies View RelatedI have a HP 6t-1200 CTO Ultrabook with the Radeon HD 8750M and Intel 4000 switchable graphics.
Problem: When I am operating with Windows 8 they function normally, but upon updating to Windows 8.1 the AMD drivers fail to be able to initiate and D3D.
1. Most current driver is dated 2013-01-14
2. Generic drivers do not recognize the hardware
3. Drivers for other HD 8xxx series based HP laptops do not resolve the problem
Current workaround: Open the Catalyst Control Center and go to switchable graphics application settings under the power tab. Switch anything that uses DirectX to run in power saving mode, this will run those applications using the intel 4000 graphics which has a more current driver that works with Windows 8.1.
Solution: For now I believe that the only solution is to wait for HP and Microsoft to work together on creating a newer driver. Once that newer driver is released it should resolve the problem. The other solution is to permanently stick to Windows 8 and not update to Windows 8.1. This is a bit more difficult though since Microsoft pushes 8.1 very aggressively. There might be a way to make the notifications and automatic attempts to update stop, but I have not looked into that solution.
System - HP Envy14-1200 Beats Edition Notebook PC Series - Product # XQ103AV. It came pre-installed Windows 7.
Error message "We couldn't create a new partition or locate an existing one. See the setup log file" appears during fresh installation of Windows 8.0.
MS Windows 8 installation DVD detects the hard drive OK.
Mini Tool Partition software (3rd party) detects the hard drive OK.
Both Windows 8 DVD and MiniTool software detects the disk partition and its formated OK, but the error message appears to prevent it from installation.
These are steps that I tried to resolve the problem, but it won't work.
1. Used Microsoft Windows 8 DVD diskpart to clean HD, partition and format........still get the same error message.
2. Used Microsoft Windows 8 DVD diskpart to clean HD and partition....................still get the same error message.
3. Used MiniTool Partition software to clean HD, partition and format........still get the same error message.
4. Used MiniTool Partition software to clean HD and partition....................still get the same error message.
5. Purchased a new hard drive repeat step 1 - 4 and I got the ......same error message.
Background
I upgraded to Windows 8 from Windows 7 and it worked for a 2 month, then I upgraded to Windows 8.1. After the system is upgraded and rebooted, the screen turn black. So I decided to re-install Windows 8.0. There is no SIM/SD card in the laptop.
I'm debating what LCD monitor to get between
20" 1600 x 900
http://www.newegg.com/Product/Produc...82E16824005128
and
23" 1920 x 1080
http://www.newegg.com/Product/Produc...82E16824005125
I know that i'll have a better performance with the 20" since it's using the lower resolution but how much of a decrease in performance would i see if i hooked it up to the 23" and it's native resolution? I'll be playing some what intensive games.
Is it normal that dell.ca would have fewer choices of screens than dell.com? I'm looking at the studio 15, and dell.com lists Hi Resolution/Bright,
glossy widescreen 15.4 WLED display (1440x900) as a choice, which is what I want, but dell.ca doesn't. When I view the system specs though, that choice is listed as on option.
I have a Dell Latitude E6530 and when I plugged in my monitor and keyboard into the docking station, they were not recognized. But I can plug them into the laptop while docked and they are recognized.
View 1 Replies View RelatedI have a Dell Inspiron N5010 purchased about 2 and a half years ago. I was just deleting some random programs which I don't ever use, and accidentally clicked on uninstall Dell Data Safe Local Back up.
How to reinstall it? I tried to do so by clicking this link [URL] .... but it just came up with an error message.
my laptop vostro 3460 won't boot any more. When I turn it on it loads the Dell logo (I suppose it passes the POST) but then it just shows a black page. It could be anything, but I guess that it may have something to do with Windows 8 and the UEFI system. I also would be quite happy to install linux mint and get rid of Windows, but I don't know how to change the boot priority order.
So my questions are:
1 is it a hardware issue ? if not, can I solve my problem easily ?
2 how can I change the boot priority order, to install mint ?
I am looking for xp driver for Dell Wireless WLAN 1397 Half MiniCard (4312bg) (boradcom).
View 3 Replies View RelatedDell Inspiron 1545 with Vista
Slow keyboard response, letters don't keep up with my typing.
Can a dell lcd screen work in non-dell laptops, or do they use a non-standard connection?
View 3 Replies View Relatedwhen i first got my dell inspiron and it was all good. when i set the monitor to shut off after 1 minute of being idle, it did and would not turn on unless someone moved the mouse of pressed a button. however, after i reformatted, the computer monitor would shut off after 1 min but soon afterwards it turns on again by itself, then it goes off again, then it remains on permanently. i recently formatted my laptop again and this problem persists. anyone knows whats sup? im using xp ftw... and my configurations are the same as it was before the reformats so idk whats wrong.
View 9 Replies View Related