So lately (the last few days, just out of nowhere) I've been starting to have a problem with an XPS m1330. Every now and again the notebook starts Windows
A lot of the times it doesn't go past the welcome screen (after entering the user password etc.)
If it does get past the welcome screen it just is extremely slow for the first 5-7min then, it's normal again .....
When I unplug the charger, the laptop returns to normal speed. Does anyone know the reason why this is occurring and if it can be fixed?
Also, I don't think the laptop is actually charging
In the task manager I see the CPU usage at around 20% when its not plugged in, and the moment I plug it in, it goes to 100%, then I unplug it and it instantly goes back to 20%.
I have a Dell XPS 1530 and at school, my computer connects to the wireless internet fine and has normal speed as if it were connected to an ethernet cord, but at home,
it connects but is extremely slow. There are other laptops that connect to the router and they have fast speeds. My computer has vista home premium, 4 gb, intel core 2 duo cpu, t8300 @ 2.40 ghz.
Today my battery charging stopped working properly.
It does charge (or seems so) but it takes about 5 hours for each 1% percent.
The battery is the 9 cells one and the charger is 150 w.
The battery wage is at about 50% but it was charging as fast as always until today.
Things I have already tried:
- Charger is recognized by the BIOS as a 150 w charger.
- The laptop works without the battery (with the charger plugged in, obviously).
- Reflashed BIOS (version is A19).
- Recalibration of the battery.
All the warranty periods are over (both laptop and battery). Is it possible that I need a new charger even though the laptop is working without battery? Could I need a new battery?
I have an hp l2005co (lance armstrong edition) that has started to go extremely slow. I tried formatting and even downgrading to xp. The xp installation took 6 yes 6 hours. I ram memtest86 and it found zero errors. I also replaced the hd with a new one and I got the same thing. I got an application that tells me the temperatures and idle they would hover at around 60 degrees celsius. I took the computer apart and took the terrible little cushion off the heatsink and applied some thermal grease and now it idles at around 48 degrees celsius. Even after I did that, it's still running excruciatingly slow. Startup times increased drastically though.
View 10 Replies View RelatedI'm guessing I did this to myself somehow but I can't figure out how to fix it. It originally came with Visa but I downgraded to XP and had been using it without problems for awhile. It started getting a little slow so I recently installed (and soon after uninstalled) a bunch of optimizing / driver updating programs. After playing around with those, my laptop is running super slow... I can't watch videos, the buffer causes it to just show the image while the audio plays... After running Dr. Hardware it looks like my CPU is only running at 800mhz which is a lot slower than it used to.
View 10 Replies View Relatedi just disassembled my dv5t to fix an issue i was having with the screen. the screen seems to work fine now however it is running ungodly slow.
in order to get to my screen cables i had to take out the Following:
-hard drive
-WLAN module
-Switch cover & keyboard
-the display bezel
i'm not exactly sure what might be causing this because it was working just fine (except for my screen issue) before the disassembly
also it seems to run a little bit better in safe mode but its still slow
after playing with it for a while its main problem is booting and programs are crashing. it takes about 10 minutes to fully boot and then it runs at a normal speed however programs keep crashing like crazy.
Have an HP 2000-208CA Notebook that came with 64 bit, WIN7. This notebook is extremely slow. The processor and memory I believe is the biggest issue with this notebook. Have installed WIN7, 32 bit. Now can't find the correct wifi drivers for this notebook. Have downloaded all wifi drivers that were listed for WIN7, 32bit for an HP 2000-208CA notebook, but none of them work. Any alternative wifi drivers?
View 2 Replies View RelatedI just did a OneKeyRecovery to reset the notebook (original Win8); after that I did an upgrade to Win8.1; now the notebook boots (reboot/shutdown) very slow, booting takes >5 min; when it's up it's quite ok.
Assume an issue with the SSD cache, SSD is not visible (device manager etc,), reinstalled smartcache, smartcache doesn't find an SSD....
I've had my HP envy Touchsmart 15-J102sa for about 3 months now and ever since I've had it, it runs really slow at time. It's occurs more often when I'm on the internet browsing or watching a video on youtube. When It starts running slow, it say the page is not responding for about 3 mins then it displays the page and start working at normal speed again. I really need any sort of solutions that might fix it, I know for a fact that it's not a virus because I scan pc everytime I turn it on.Â
View 2 Replies View RelatedI recently bought this laptop (HP Pavillion 17 F035ND) with win8 pre installed.Because of the limits of my school's software I can not use win8.So naturally, I downgraded to win7, and installed everything I needed.But I have problems with 2 drivers, Bluetooth driver and the WLAN driver.Bluetooth won't connect properly, and the WLAN is extremely slow.My driver software says that I need Broadcom drivers for both of them, but the HP downloads only provide Intel or Realtek.
Â
Is the hardware really Broadcom? I know my way around computers and I searched the entire web.The bluetooth doesn't bother me that much, but I really need the WLAN drivers..link me to the correct drivers for my laptop with win7?
When I logon to Win7 it hangs at 'welcome' for quite a while, then goes to desktop and has the loading cursor while my desktop icons load, then my antivirus loads.
It isn't crazy slow, it is just a lot slower than my M1530 which was instant. Am I just noticing the difference between my 5400rpm drive and my old 7200rpm drive? Is it a significant difference? I will be poppin in another WD Scorpio Black
I've had a Vostro for a couple months now and continue to be plagued by slow startup times of 2-3 minutes. Just as a frame of reference, I have 3 systems: a desktop I built, a Latitude E6400 and the Vostro. All have similar specs - a Core2Quad on the desktop, a dual-core Centrino on the Latitude and a Core i5 on the Vostro; each with 4GB RAM. I've installed Windows 7 Ultimate 64-bit and the same software on each of the machines - if anything, the Vostro has LESS software on it than the other 2. I downloaded all the drivers directly from this site.
At first I thought the startup time was slow due to a 5400 RPM hard drive, but last night I replaced it with a 7200 RPM (though not a fresh install - I took an image of the existing installation using imagex and applied it to the new drive) and it's still slow to boot. I turned off some programs and services in msconfig and using Revo and CCleaner and still get similar results.
Just now I turned both laptops on simultaneously to make sure I'm not making a big deal out of it (especially since the Vostro goes straight to desktop and the Latitude requires me to enter credentials) and I still got to my Latitude's desktop first - despite having to re-enter the password a couple of times!
I'll note that this is the only time the Vostro feels slow at all. Once I'm in everything runs smoothly and resuming from hibernate is noticeably faster (reasonably so I suppose)....
From power button press to everything being loaded it takes quite a while.
I installed a bunch of stuff but everything seems clean and organized.
Is it the objectdock I installed?
I have dell inspiron 15R, 1TB HDD, i7 processor, windows 8.1. My C drive has 500GB(approx) memory out of which 200GB(approx) is free
It used to work fast but suddenly it became very slow. I tried restarting , it got shut down but was unable to start. So I ran diagnostic test which gave an error in hard disk with error code :2000-0142. Â The next morning I ran the diagnostic test again and it ran successfully without any error.
I formatted it from my recovery disk and it took me almost whole night as the formatting process was also very slow. My laptop still works very slow. It takes almost 15mins for start-up and my applications are also opening too slow.
It's been a year I've been using Lenovo p500. It works great, but recently the startup has been really slow. it takes around 3-4 minutes sometimes. Is there any way to improvise the performance?
Â
Does "Bios Update" solve the problem??
I have an XPS M1330 and just recently it starts to make the eject noise whenever I boot up or come out of sleep mode. I don't think it's a hardware issue since I tried to install Windows 7 but went back to Vista since my drivers weren't working, and could not be installed under Windows 7. I've tried disabling the driver, deleting Upper and LowerFilters in the registry, uninstalling the driver (which actually appears to reinstall automatically after reboot or sleep), downloaded a program to disable Auto Eject, went to AutoPlay in Control Pabel and unchecked that, and uncheck it from the POST sequence by entering the BIOS setup upon bootup (The F2 Button Setup). (A diagnostics check found the drive to be running fine.) I admit, I accidentally dropped the laptop, but since I've been able to install the lastest driver, insert a disk and it successfully reads it, I've disregarded hardware as the issue. For some reason, the drive tries to eject a nonexistent disk whenever either the E:/ is clicked in My Computer, bootup, or coming from sleep. This problem doesn't occur when there's a disk in the drive, but I don't want to keep inserting a dummy disk just to cancel the noise because I think this might be some auto eject BIOS command that might have accidentally been triggered. Other than this, the drive seems to be functioning normally. Who wants to say it's a normal sound, this didn't occur before. I know the CD-ROM quickly "wakes up" upon bootup, but this is an auto eject noise.
Specs: Dell XPS M1330, MS Windows Vista Home Premium, 4GB RAM, 300 GB HDD, 2.1 GHZ Power
So My M1330 was part of the defective batches of Nvidia Video card. A dell tech guy came and replace the motherboard and also a defective battery. I assume that the hard drive would work the same and I assumed I didn't need to format. My current hard drive was just taking forever to boot up, and was just so slow. I figure i needed to reformat.
I used a new 320GB hard drive i was planning to replace the current drive with. Now that its fully formatted. It's still unbelievable slow. I though the speed step might not be working current but i used wcpuid to test the current speed and it was at full speed. Though the system doesn't seem hot at all. I just cant figure out why its so slow. bios is currently at A12 which is the lastest
Purchased from Amazon 2 months ago and worked perfectly without a hitch until a few days ago when I got on the receiving end of the win8 equivalent of the BSOD with the . From them on I ended up with slow boots random pauses etc. I opted to refresh the PC without affecting any files but toward the end of the reinstall the BSOD appears and now all I had was a black background with only a white cursor.
Â
Left that for over a hour, nothing happened so held down the power button to force shutdown. Found that Z500 no longer boots into win8 so eventually decided to do a clean reinstall with the onekeyrecovery via NOVO button. This should have been the end of all the problem I was having but unbelievably the problem is still there.
Â
Research what I could about this and found that the slow boot is caused by hard disk constantly being thrashed about by a system file ntoskrnl.exe. I tried updating the wifi driver and it appeared to have done the trick until the next day when I booted up the system again. It appear that the constant hd activity goes away after a few hours of leaving the PC on.
Â
Anyway I have drawn a blank as to what's going on especially as everything was working perfectly until up to that point with no signs of system conflict.
When I first loaded up my Vaio the Startup Assistant booted by itself and I unchecked the box to stop booting on startup. After the while the Startup Assistant started booting up by itself even though the box is still unchecked. I thought by recovering to factory settings and unchecking the box would fix it but it has started booting up again.
how I can get rid of the Vaio software?
I have Compaq Presario CQ42-273TU NBPC. Â In my laptop , if i play video , it becomes very slow. After video becomes slow, everything else on the laptop becomes slow. recently i gave laptop for service also, then also i have issue with video.
View 8 Replies View RelatedMy SXPS m1640 gets extremely hot underneath the touchpad even when I'm performing basic tasks such as browsing the web. Is that where the graphics card is located? Is it normal for the m1640's to get very hot in this area?
View 10 Replies View RelatedI just got my Studio 1555 today and am having some major issues with the lid. When it's closed, if I press it lightly the lid has a lot of flex.
When I open the laptop and lightly press my fingertips into the lid I can see the imprints of my fingertips on the screen! The quality of the lid is equivalent to that of a cheap plastic child's toy.
I contacted technical support and the rep was trying to just replace the lid with another...the SAME one .....
lately my Inspiron 1720 has been running crazy hot, and overheating (actually shutting down) while playing games (specifically Sacred 2).
For example right now I am only running Firefox and HWMonitor, and here is an excerpt from the HWMonitor report:
Intel Mobile Core 2 Duo T5750 hardware monitor
Temperature sensor 070°C (157°F) [0xF] (core #0)
Temperature sensor 175°C (166°F) [0xA] (core #1)
In fact shortly after saving that report, my computer actually shut down from heat. I have since restarted it and it is currently running at a roughly constant 52C.
The CPU gets into the 70s and overheats a lot when playing Sacred 2. However, strangely even after closing that game the temperature doesn't come down, such as what happened above .....
i have found file transfer rate is noticeably low in my XPS M1530 machine. i was transferring 1.7gb file from I partition to G partition. it started sending 22mb/sec.
then there after i found it to b reduced to 10/12 mb/sec sometimes extremely low like 3 or 4mb/sec. why is that? how can i keep it constant at 22 or 20 mb/sec transferring rate.
I have been using an XPS m1530 as my primary laptop and has been always plugged in (less than 10 times completely drained).
Now, after 1 year i just reached 1h30mins with surfing & music streaming at 3 steps below the higher brightness (and at the energy save battery scheme)
My cpu core hits the mid 90's when gaming. i undervolted it to 1100v @ 11x and the temps only hit the high 80's/low 90's during gaming but hit the mid nineties in orthos and was still going up.
This is getting me down a bit cus the cpu ramps down during gaming and screws up the fps, and also im outside of the uk so cant get my laptop to dell (there are no dell suppliers where i am)
does anyone have any idea what might be wrong. am i reading the temps correctly? speedfan shows much lower temps (in the 70s) however cpuz, rightmark and hwmonitor all show temps consistent with eachother.
Its a t7500.
there's nothing blocking the outake at the back; i lifted the laptop up during orthos to let air out of the bottom but it didnt make any difference.
I've built a few desktops but i havent really tinkered with this laptop apart from adding more ram.
My problem is that the laptop is getting extremely hot on the left side of keyboard during any games i play, even older games. I literally cannot rest my left hand to use keyboard as it is frying it.
When i initially bought the laptop 4 months ago I could play those games and the case (keyboard area including) would stay perfectly cool. I had even played need for speed hot pursuit new with full graphics and laptop was cool.
There is a definite massive difference in case temperature between initial month or so and recently.
HW monitor program recorded temperatures of 85 degrees max for i5 processor, and around 72-78 degrees on graphics card during game play on a variety of games old and new.
Worth to mention that during other lightweight activities, such as surfing etc the laptop is cool.
Laptop fan speed very fast on bios screen but when booted os. decreasing speed. I updated bios to last version but further deteriorated. what can I solve this problem ? and why i dont see fan speed settings in bios ?
View 1 Replies View RelatedI tried to ask the Ubuntu Forums but they came up blank. Ok I am typing on my old laptop. I have a strange problem with my new Dell xps studio 13.
The Wifi driver on it is not working correctly. I can get my wifi to work but for some reason the signal is EXTREMELY weak. i MEAN I CAN BARELY USE MY WIFI it is that weak.............................