I know some folks have put a T9300 in their m1330, but the screenshots I've seen show the bios incorrectly detecting the CPU speed (A06 I believe). I want to know if the new A07 bios has corrected this issue, but I never saw any followup. Can anyone who has done this upgrade confirm/deny if A07 fixed the detection issue?
My current configuration is the following: CPU: T7500 RAM: 2GB
Is it worth upgrading to T9500 and 4GB of RAM?
Should I do it through Dell or by my own? I know that doing it by my own is much cheaper but what's happening with the guarantee? Moreover, will I need a new charger? How much does it cost approximately?
Is there anything else that I should take into account?
I currently have 3gb of Corsair Ram(2gb+1gb) on a M1330, 2.2ghz, 120gb hdd, with Win 7.
I know Vista only recognized 3.2gb RAM with video ram/system resources eating some ram. Does Win 7 recognize the full 4gb?
I am trying to maximize performance for photo editing and would like to know if I should bother upping the memory to 4gb. I heard putting in same RAM chips(2gbx2gb) will allow dual-channel performance. Is the speed difference using dual-channel noticeable?
i'm new to these forums and know VERY LITTLE about computers. i bought my laptop 2 years ago and cheaped out on the processor to save some cash.
i want to upgrade the processor now because it is a little slow for my liking plus i want to be able to play some newer video games like BC2 and MW2.
my current processor is an Intel Core 2 Duo CPU T7100 @ 1.80GHz
I dont know too much about computers like I said but im pretty sure I want one that can run at at least 2.4GHz and read that the T8300 ran at 2.4GHz in a thread but that thread was about 3 years old XD.
edit: found an Intel Core 2 Duo CPU T8600 @ 2.4GHz for $210. is that a good deal?
I currently own an M1330 with the Intel 950 graphics (meh.) I want Nvidia graphics. I know that this cannot be done via the motherboard that is currently installed. I have located a few resellers of a motherboard with an 8400M GS GPU. I am well-enough versed to install this hardware in my system as I have disassembled this beast once already to upgrade my CPU.
Question 1: Is there any motherboard that contains a higher level GPU than the 8400 GS for the M1330? I've heard rumors or maybe seen references to a GT GPU?
Question 2: Is this upgrade a simple drop in or are there other considerations to pay attention too? example: will a new motherboard necessitate a different tray/heatsink or combination thereof?
Question 3: Are the connections on the Nvidia GPU MoBo the same and in the same location as in the Intel GPU MoBo?
Any other input I may not be considering would be most helpful. I am going to be away from home for a bit and my laptop will do duty as TV Machine /Movie Machine/Company of Heroes Machine. The Intel GPU simply does not make the cut for even full screen DVD content (without chopiness.)
I was wondering that since the socket for the processor in the M1730 is a socket P and thats the same socket the new Penryns will use, will it be possible to just drop one in like we were able to do so on the E1705 when Merom came out? The run at a much lower voltage and from this review [url] it would increase battery life and is more powerful to boot so it just sounds like a good idea.
Crap, looks like I messed up the topic for this thread.
I like repairing laptops as a hobby. I recently bought a M1330 laptop without a screen and with a small video card problem. The laptop still worked on external screen, but showed some lines.
This was due to the NVidia gpu problem. I managed to fix it by using a hot air soldering station(Youtube video). To decrease the chance that it arrises again, I also did the copper mod(description). This meant that I could finally use the laptop for my work if I could just install a LCD screen.
Since I have spend quite some time on repairing the laptop already, I decided to invest some additional money to upgrade from a CCFL to a LED backlit LCD. I ordered a new cover, screen and LED LCD cable.
When I assembled all the parts, everything fits perfectly .....
It seems like the temperature readings from both cores of my P8400 on my Dell Latitude E6500 running Windows 7 RC have some sort of minimum built into them. The reported temperatures will never drop below 32 for Core 0, and 39 for Core 1. Even after I resume from suspend, when the CPU should be at room temperature, as soon as I boot up it's 39/32. Similarly, while temperatures above that on SpeedFan show normal fluctuations, like you expect from a CPU temperature reading, once it hits the floor, it just becomes a flat straight line.
I'm not sure if this is the sensors, the software, or what.
I purchased my M1330 over a year ago, with an internal 120gb hard drive.
I just purchased the HITACHI Travelstar 7K320 from NewEgg, since I'd like a both faster and larger drive. However, I am curious about the following:
Right now, my hard drive is flush with the side of my laptop. It has a black trim on the side that is the reason for the flush side. It came this way from Dell. However, in purchasing the new hard drive, what can I do to make the side flush again, as well as the hard drive secure (dust, falling out, etc)? Can dell provide the part (side cover)?
For your reference, you can notice the hard drive cover in this photo (far right of the laptop):
i am interested to know if the pogo stylus will work on the trackpad of the penryn mbp; also, what is a good software that allow us to draw mindlessly? since i am only drawing some simple graphs for economics classes i am not looking for a wacom intuous/bamboo level of precisions and wanting to use it before making a 300ish purchase of a new HDD for my x41t (233x CF isn't fast enough i guess)
i got my santa rosa MBP not too long ago (i bought it second hand). i am extremely happy with the machine as it is a 2.4ghz c2d with 160g hdd at 5400rpm and 8600gt 256mg gpu. i know this has been discussed many times, so i have been reading about the multi touch trackpad and was a bit bummed that i didnt get the newer 2008 penryn model instead. 2 days ago i was thiking about replacing the SR MBP top case with a penryn MBP top case and have the multi touch, 4 finger gesture ability on my SR MBP. therefore i started googling to see of people have actually done conversions and worked..fortunately, i found a member on this forum and confirmed that it actually works...but unfortunately there was not guide for this operation. I would really want to hear from those that has performed such replacement operation and perhaps give me some tips and what i may need to watch out for. in addition to that, does anybody know of a guide for this replacement? would the penryn top case keyboard and trackpad connections fit the SR MBP? any modifications needed?
I should be getting my upgrade (Pro 64) within the next week and was wondering which method is better. I obviously know that it will run a bit faster for the first month or so with clean install, however, my concern is with the activation of the dell free upgrade version. Will it simply be boot the free upgrade disk and install and it will be activated fine? Or, is there more to it? Also, say a year from now I wanted reformat/reinstall win 7... How would I go about doing that with the dell free upgrade DVD?
With all the hand wringing folks have been doing about the lack of drivers for a clean install of Win7 I thought I'd jump in to the deep end of the pool with my FZ190 and investigate an alternative. My good friends Rajesh and Dr. Pratik have done clean installs of Win7 on FZ models, but I decided to take a different approach... the "dreaded" OS in place upgrade. Partly out of curiosity, I wanted to see if it would work, but mainly because I have a ton of software that would need to be reinstalled, if I did a clean install. That would mean days or weeks of inventorying every thing I have installed, digging up installation media and then installing all the stuff. I just don't have the spare time. So...
This past weekend I imaged my C: drive (all my data and I mean ALL my data is on D:, I am a fanatic about that). MAKE SURE YOU HAVE A BACKUP OF YOUR C: DRIVE BEFORE YOU TRY AN UPGRADE! I ran the Windows 7 Update adviser and it said I had some issues:
NVIDIA GeForce 8400M GT - NVIDIA Not compatible The driver installed for this device is not compatible with Windows 7....................
Lately my laptop would freeze and I could see faint white lines only at the top of my screen. (lines do not go all the way down) This has happened twice in a day. Ctrl Alt Del doesn't work so I have to power down the system and it runs normal after that.
I'm really afraid its the dreaded vertical lines issues. I had my mobo + GPU replaced a year ago, still under CC warranty but its such a pain.
I am wondering if anyone know whether dell fixed the video card and heating issues (like many in this forum mentioned) yet?
I am very interested in this machine but I don't want to risk buying something that would burn out later. I am also interested in the new studio XPS 13 as well though I would love to know how it handles heat and the video card (i hate burned-out video cards..
i have been having problems with my xps m1330 ive had it for 3 years now and its been decent to me... 3 months ago when my warranty was up i sent it in to get the gpu and mother board replaced because of the warranty. Just recently it started acting up bad...
Would freeze left and right start running check disk when i tried to restart it...so i decided to reformat it seeing some scan i ran in dos was saying i was missing a system file. So i cleared the c drive and installed vista fresh... re-put my 60gb of music over and everything seemed fine for 2 days... not today it froze up on me ... i tried to restart and got a blue screen that flashed to fast to read and i tried to restart again and got a 2000-0141 error and alot of beeping and crap... so i restarted it and it was gone...
I've had my M1330 for about 1 1/2 yrs now. The first issue is that at one point 3 months ago,
I was being randomly electrocuted by my laptop when I placed my hand on the open space below the keyboard. About a few days after the random electrocution started, the battery died, and won't recharge at all.
Lastly, there is a constant whistling sound that was coming from the laptop ever since I bought it.
I'm out of warranty. Am I able to buy a new warranty for my laptop at this time or is it too late for me? And if it is too late, should I attempt to make repairs through Dell, or am I better off selling the laptop,
and then use the cash towards a lower pc, like those mini/EPC's that these companies are selling now?