why they stopped working they just did, my pg up and down button. when i press them they just go up but come back down again. Yesterday i accidently pressed the F7 button & this window popped up saying that the mode of the cursor had been changed..i don't know if that has anything to do with it but after i pressed f7 the page up and down buttons stopped working correctly...
View 4 RepliesAfter some problems with software, I did a clean install of Vista Ultimate 64bit. I copied the Swsetup folder and used those drivers, downloaded some newer ones and some applications from official HP site.
It works all great, except the two QuickLaunch buttons: for Qmenu and WLAN. Nothing happens if I pressed them. They don't even blink! But the others work just fine - even the Fn keys.
I've tried reinstalling the QLB application and drivers for a dozen times with no change.
i purchased laptop vaio vgn-c36mj and the original windows "x64"freezes and i had to format and i downloaded vista x32 and it worked fine but the problem is the touch buttoms aren't working
note:i downloaded all the drivers for x32 from the site and still they don't work and i checked device manager and found nothing not installed and b4 my format there were cool wallpapers vaio and some applications i don't remember from vaio but didn't find them on the site
i am running windows 7, with my FZ38m one thing dont know how to get the FN buttons working to brighten the lcd etc..
also do you need a special driver for the lcd panel? its currently showing as a generic pnp one.
The buttons on the control strip stopped working so I have updated to the latest bios and re - installed quickset.
The centre configurable button is now working but although the other two recognise when they are touched they still do not work.
(XPS 17 - L702X 3D vision, backlit keyboard.)
Only Fn+space work.
I have Windows 7 Ultimate 64 and why this doesn't work.
I just got my new SR420 and I did a clean install however my buttons for the mode and settings etc at the top (external) aren't working. Anyone know which drivers or programs control that function,
View 10 Replies View Relatedthe two buttons to control brightness worked fine before I uninstalled the default graphics driver. Now, when I press it I still get the GUI slider, but the brightness does not change. My brightness can be changed fine in the windows power settings. I have reinstalled the same thing I uninstalled, reinstalled Energy Manager, and still it does not work.
View 2 Replies View RelatedHP G60-243CL Notebook PC
prtsc delete home end pg up pg dn buttons not working. they just quit for some odd reason.
I can't find the driver for the media buttons on the front of the Inspiron 6000 notebook. I know the buttons work, but I need the software / driver for them.
Also can't find it on the dell.com drivers page (well at least, none of the descriptions match; I may be wrong).
i have VGN-CS110E.i dont have its recovery dvd, first u tell me then from where i can get its recovery dvd, and secondly the AV buttons r not working due to no driver instelled... i need my multimedia drivers also...
View 9 Replies View Relatedmy laptop;s shortcut buttonsexcept window mobility center other two buttons are not working , i have dell inspiron n5110,
View 2 Replies View RelatedThe touch sensitive media buttons above the keyboard on my Studio XPS 1647 stopped working the other day. When I tried to turn my laptop back on the computer beeped a few times and the screen flashed a few solid colors and then went black. I had to turn the laptop off and on again and it booted as normal except the media buttons stopped working. They do not light up or respond to touch.
I have restarted the laptop, updated the Dell QuickSet drivers and the BIOS and nothing has fixed it. According to this post the media buttons need to be replaced. How can I do that and where can I buy the parts needed?
1 more solution: try to downgrade the BIOS to 1.01
View 4 Replies View RelatedI bought t420 last month. Yesterday i spilled liquid on the clicks on touchpad. The right button works but it freezes sometimes, left doesn't work at all. Because i am in Europe now,the warnity does not cover. Also the ultranav buttons don't work. With external mouse it works.
View 6 Replies View RelatedMy touchpad doesn't work but the buttons are working fine. It also clicks randomly (not with the left or right mouse buttons) so I have to disable it. I have installed the latest version of the Synaptic driver and the problem still persists. I think only the touchpad is having a problem because when I use a wireless mouse, it works fine.
View 1 Replies View RelatedMy question concerns the non-functioning sleep mode buttons on my Lenovo W540 20BG.
In my current power management settings, the W540 is suppose to enter sleep mode by pressing Fn4 or by pressing the round power button shortly. However, either one of these methods do not work.
My computer does enter sleep mode when usign the Windows start menu (Start->Shut Down -> Sleep).
I recently bought a Lenovo G505s about a month ago. Everything is fine with it until i downloaded Steam and downloaded some games. 3 of the games i downloaded are shooters and therefore require the left mouse button. But when i click it to shoot, it doesn't respond sometimes and is very laggy. This is not the fault of the game as i tried it in different ones but the problem is still there. i tried to switch round the buttons (so that the right button is to shoot and the left to aim) and it works fine...
If it is needed here are some specs for the pc:
AMD A8
6gb ram
WIndows 8.1
Also the buttons and trackpad work completely fine with everything else except games including Minecraft. it seems that when i am moving with WASD the button doesn't work but the right click button does.
I tried to clean the underneath of the touchpad mouse buttons of this Dell Vostro 2520 Notebook. since then both the buttons are not working. I am not being able to use the left right buttons and now using an external mouse.
What do I need to replace? How to purchase and from where. dell techincl support phone waiting time is currently 2-3 hours. I just tried.
I have an HP Envy Ultrabook 4-1130us and the F6, F7, and F8 buttons aren't working as command controls for music anymore. All my other F1-F12 buttons work except those three. This has happened before and I thought it was due to iTunes not being updated. I updated iTunes and the buttons still aren't working. I ran a diagnostic test on my keyboard and the test says that nothing is wrong-which is partially true because every other button except F6, F7, and F8 are working.
View 5 Replies View RelatedI have reinstalled my laptop with a fresh windows 8.1 install.
I have managed to install all the drivers and software except the quick launch buttons. I am unable to find the correct software.
I have the following Laptop: HP ENVY 17-j053ea Notebook PC
How I get the quick launch buttons working. I have run the HP support assistant software and it says nothing else needs updating ?
The touchpad on my Inspiron 15z freezes-up a few times a day; the cursor suddenly won't respond and buttons stop working. Restarting the machine usually fixes the problem, until the next time...
View 10 Replies View Relatedhow to allocate volume up and volume down function to arrow keys (up and down) so while presing both FN key and one of the arrows i can control sound?
View 3 Replies View RelatedI currently own a HDX9494nr, and my touchpad and buttons are not working. I don't want to send it back, as this is my main computer, and I depend on it for work and leisure. Any suggestions for me? Maybe something I can fix, instead of shipping it back to HP and having no computer for two weeks? BTW, the cursor moves, but it dosen't respond when i tap it to open links or programs.
View 7 Replies View RelatedIs it possible to completely disable the Quick touch buttons at the top of the dv5t keyboard?...I already unistalled quick touch driver...but they still work
View 3 Replies View RelatedI got my wife an HP DV2 for Mother's Day. She was extremely excited because she has needed a new laptop for quite some time. Anyway, we opened it and started to boot it up everything was looking good. I then happened to glance down at the mouse buttons and noticed that the left button looks as if it was pressed. There is definitely a gap when running your finger across the buttons. When pressing the right mouse button, it moves down as far as the left button sits while unpressed.
Now, I should clarify that the left button still works, it is just sitting lower than it seems like it should. I just wanted to see if anyone else has experienced this with their "brand new out of the box" HP DV2. My wife and I were both extremely bummed out, only because I equate it to buying a brand new car and noticing that the headlight is pressed in a little it and is uneven. Are we being too picky? To us, it seems ridiculous that a $700 laptop would have a quality issue like this.
I'm attaching a couple pictures showing the issue - in one, you can see me pressing the right button down to the level of the left unpressed button.
I have this laptop Dv7-1110eg.... Vista Ultimate 64bit
Just buy, the video card did not work ... was a hardware problem ... HP came to seek the ... did little more than 10 days ... HP has returned to me the laptop ... and now everything works perfectly, minus the touch volume controls... the play, stop, and other ... activating and deactivating the wireless network...
If turns the volume on the taskbar touch control changes color ... that works, but fingers (touching it) does not work ...
Deploying the volume bar in the taskbar and click on the volume control Touch ... volume bar is moved a few millimeters, but always returns to the same place
HP has changed my motherboard for the problem of video ... if I remember that before the touch controls worked lead to perfection ...
Just as I returned the touch controls not working ... trying to solve the problem .... I installed Vista Ultimate 64bit and I downloaded all the drivers here [url] I have installed all ... even update the bios ... touch controls do not work
i installed the newest drivers from hp (6.50.9.1), didn't help. uninstalled them, installed 6.50.7.1, didn't work.
that and i've been getting that system sound you get from plugging in or unplugging a USB-device, even though i'm not doing that (know what i'm referring to?)
I have HP DV5T-1200SE
It came with vista installed and when i pressed the volume buttons on top of the keyboard a gray bar used to come indicating the volume...but when i installed Windows 7 the gray bar is not coming....even though the buttons function properly(that is volume goes up and down) (pressing the volume touch button increases the volume, but does not display the volume slider window on the screen)
I even installed the latest HP Quick launch buttons Windows 7 driver:
[url]
and I also tried this one:
[url]
I wanna game and its hard for me to hold fn and then press F1, is there anyway to disable this?
Also is there a way to disable the touchpad?