HP Pavilion Dm4 1265dx :: Finger Print Sensor Not Working
Aug 25, 2014I am using hp pavilion dm4 1265dx. running in win 8 os. my finger print sensor not working .....
View 6 RepliesI am using hp pavilion dm4 1265dx. running in win 8 os. my finger print sensor not working .....
View 6 RepliesThe Biometric Fingerprint device on my HP Pavilion dv6 laptop is not working. I get the message:
1. The Fingerprint reader is not detected (during start up prior to logging in).
2. Windows did not find any biometric devices on this computer ( when I checked via Control Panel).
I went into this challenge when I reinstalled my windows 7 o/s after I realised I had some corrupted files and so could not install an HP printer on my computer. Unfortunately I did not have the original restoration file so I had to do reformating and reinstallation of the o/s.
My O/S is Windows 7 ultimate.
Problem:1
I have recently purchased Vostro 3550 with Finger Print reader. After i updating all drivers and checked in dell diagnostic also. Nothing happen to no response for my reader. I purchased 07-05-02012.It haven't worked while i purchased itself and i updated all drivers
Problem :2
ST MICRO SCREEN DETECTION SENSOR ISN'T COMPATIBLE WITH THIS VERSION OF WINDOWS - ? Wat i need to do for this???????????
I have checked through installing Free fall data protection. it shows nothing.
I have an acer travelMate 8573 gt and I recently downloaded the drivers for the fionger print reader for the acer website but I can't make it to work because I don't have the acer pro shield where can i get it. How I can use to make my finger print reader to work...
View 1 Replies View RelatedMy HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro. In device manager showing that biometric reader is working properly. But actually the finger printer reader is not reading or senseing. It seems like "dummy" part.
View 2 Replies View RelatedRecently my fingerprint stopped working for power on and Windows login. Fingerprint reader setup utility started to show some strange error followed by empty utility window (see screenshots below).
Link to picture
Link to picture
I have updated all the software using "Lenovo update and drivers" but it did not work (BIOS image also was updated during this process). I doubt that it is hardware fault because I have Linux OS installed as dual boot among with Windows, and no problems there with logging in using fingerprint reader (fingerprint-gui package)...
Just got my Studio 15 today. So far so good. I thought Firefox was not compatible with the finger print reader, so far it's working for me with over 25 passwords already. My only concern so far is the keyboard flex!
View 9 Replies View RelatedI have a T500 (LENOVO 2081CTO ThinkPad T500) running W7 32 bit. Been working fine since September 10. Today when simply trying to logon the fingerprint sensor has stopped working. Laptop had not even been moved, simply resting on desk and then switched on from powered off.
A few times since have received message that "USB device is being installed" with finally "USB Device could not be installed. There is a problem with your device." Device Manager showed a problem with "USB Composite device"
Powered off/on gave same symptom.
Downloaded & installed latest fingerprint software 7wf162ww.exe. Installed OK. USB device appeared to then automatically pick up and reinstall correctly. BUT still unable to use fingerprint to logon or for with Thinkvantage Client Security.
Using Thinkvantage Lenovo Fingerprint Software gives error "Cannot communicate with sensor. Please confirm the sensor is ready."
I've also noticed the keyboard around the fingerprint sensor is very warm, almost hot. As if it is being constantly turned on?
Fingerprint sensor is AuthenTec Inc. AES2810
I recently have ordered an M1330 but I have been looking at some of the user pictures that do not have the finger print reader. Is this because it is not standard on the laptop and do you need to pay extra? (Im talking about the NZ/AUS version [url] theres no option to include or exclude it like the US site).
Also is it possible to upgrade from the LCD to LED in the future, if so how much?
Anyone ever notice that half the time the finger print scanner doesnt work and you have to reboot the system for it to work again?
I get this often when I switch modes from stamina to speed and put the computer to sleep. Waking back up finger print scanner doesn't work
I have installed validity sensor driver on my hp elitebook 8440w.
However i am wondering if I can use fingerprint device without installing HP application.
FYI, I could see the device in my device manager.
I have a Compaq nx6325 running Windows Vista Business 32bit and I was trying to get the AuthenTec Inc. AES2501A fingerpint reader to work. I installed the minimal install from the HP Driver page and I was wondering how I could then logon with my fingerprint? Would I have to install some extra software?
View 2 Replies View RelatedJust purchased a Pavilion dm4 notebook that came with the Validity Fingerpring scanner. As soon as I bought the laptop, I was quick to install Windows 7 Pro 64 bit as my work requires the extra features in Win 7 Pro. The stock OS that was pre-installed was Win 7 Home Prem.
So here is my issue, the fingerpring scanner wont work. I have the proper driver installed from hp's website (found here) and after rebooting, it still does not work. I have installed the hp Support application that scans my notebook for the latest drivers and found no updates needed. I have not tried rolling back the driver as the option is not available (only one driver was ever installed anyways) and I have also tried uninstalling the driver, rebooting, reinstalling the driver, rebooting, and it still will not work. I have also tried doing the same just previously mention but this time running the installation as an admin (right click, "run as administrator"). Still nothing.... I also tried navigating to the driver folder on C: and then runing the application as an admin, but still come up short handed....
Sometimes the light will come on like its working, but when I go to use it to enroll my fingerprint it just won't do anything.
Is there another piece of software besides the drvier that I need to install to get this work?
I have a brand new dell precision m6400. It didnt include the finger print reader and over at part people.com i can get two different types of finger print readers.
Dell Precision M6400 Center Control Power Button Cover with FIPS Swipe Module
Dell Precision M6400 Center Control Power Button Cover with Biometric Fingerprint
Now what does FIPS Swipe Module mean?? What are the difference between them?
Anyone know if there is a way to completly disable the finger print reader? I checked the bios but i could not find anything about the finger print reader.
View 6 Replies View RelatedMy Laptop is set up so I have to check my finger print in the Bios before I can long into windows. How can I remove this option? I have done the following
1. I updated the bios to the latest version
2. I have checked ever thing in the bois to find how to remove this option. I can't find it.
3. I want to sell this computer, but can't until I get this issues resolved.
I have a Dell vostro 3360, I installed window 8 , I also installed driver for sensor finger but can't use it. What need I do to get it working....
View 7 Replies View Relatedi need the finger print driver for my hp probook 4540s. i am using windows 8.1 64bit.
View 2 Replies View RelatedMy finger print reader doesn't work the way it used to. It only asks for my finger print when logging on to Windows. At all other times it only asks for my windows password which is very annoying. What's wrong -it used to work fine. I reformatted my hdd and downloaded the latest drivers and programs using the system update program. My finger print reader version is 3.3.2.27. I have a T400 with Windows 7 Pro.
View 2 Replies View RelatedWell I use my own laptop as a admin/standard user I use my standard user account mostly. I remember on my v570 when the user access control came up i had the option and i could type the password or use the finger print. so i was wonder if their is away i could set that up on the thinkvantage fingerprint software so that when the use access control comes up when i'm on my standard user account i could swipe my finger that i use for my admin.
View 2 Replies View RelatedOn my T410 i was able to save my username and password to my network so that loggin in was super quick.
Sit, swipe, and surf.
Now on my t440s the finger print reader software only allows you to save your password. So i have to:
1. ctrl-alt-delete
2. type my user name
3. swipe (it would be just as fast to type from there)..
I upgraded xp to win 7, like we all are going to have to do, but can't get the finger print reader to work. It does show in devices that there is one on the machine. I downloaded the drivers for Vista but they got me nowhere.
View 3 Replies View RelatedI did an upgrade from win vista x32 to win 7 x64 on my Dell Studio 1735. In order to do that upgrade I did change the HDD to a 1 TB and update from 3GB to 4GB ram.
Now I have on item still not working after that upgrade. The integrated biometric (fingerprint reader) refuse to work. Windows 7 x64 did detect that it was an Authentec device, and installed it driver.
But If I installe the software for the reader. It refuse to install and give this as the reason (No driver installed for the reader) I've tried to replace the windows driver with the original Authentec drivers, but windows 7 replace the drivers with it's own.
Any windows 7 drivers out there for my Authentec integrated device ?
Is it normal for the Fingerprint reader to flash green when the X230 is turned off? Running Win8
View 2 Replies View RelatedI recently replaced a HDD with a new SSD into my Hp Pavilion dm4 1265dx and did a re-installation of windows. I have already downloaded and installed most of the drivers required but I am having a hard time trying to find and install Hp Simple pass identity/finger print reader.
Is there anyway to re-install Hp simple pass without having to pay?
My notebook lost the driver of PCI simple communication controller.I need to get the driver for my hp pavilion dm4-1265dx.Here's are the hardware ids.
PCIVEN_8086&DEV_3B64&SUBSYS_146A103C&REV_06
PCIVEN_8086&DEV_3B64&SUBSYS_146A103C
PCIVEN_8086&DEV_3B64&CC_078000
PCIVEN_8086&DEV_3B64&CC_0780
I've tried to find the driver on the Net, but I can't find the driver.
I have just installed the HP 4635 printer to my network. All devices were printing yesterday wirelessly. Today the laptop device has a print job that I have requested to delete. It has said "deleting" for two days and I can not get it "unstuck". each time I send a new print job to the que it goes in line "behind" the print job that is stuck in "deleting" mode. I have tried re-starting. re-booting, ctrl, alt, delete. nothing seeings to get this print job "unstuck" and deleted.
View 3 Replies View RelatedI have a Dell Inspiron 15r and a Dell v313w I purchased in November 2010, both are wireless and connected through a gateway/router that have been very great over the years but about a year or so ago I noticed each time I would try to print out multiple documents I could only get one document to print out, it could include one sheet or many sheets . Any others documents would be stuck in the print queue listed as " printing " but would never print out unless I restarted the computer then it would print out all documents one after another just as they had been entered complete with all sheets per document accounted for and in correct order.
After the printer had finished printing all the documents if I needed to print another document I would have the same headache all over again and the document would remain in the queue until I restarted the computer again.I'm not a spring chicken by any means and have to think logically went operating the computer or installing software so many of the technical jargon is something I really don't understand.
I'm about at my wit's end trying to get the ALS to work in Win7 on my Precision M4400. I have emailed
Dell and their response was useless, as usual. They said that because I didn't buy the machine
with Win 7, they couldn't help me. (Even though their website states the machine is fully compatible, and even though they're selling M4400s with Win 7 installed.
I have a SZ61WNC machine with XP downgrade on it. Everythings been working fine until suddenly the fingerprint reader stopped working.
View 7 Replies View Related