I have a HP pavilion G6 Notebook and I recently tried to skype someone, however my webcam is no longer detectable. The laptop is a couple of years old now, but was working fine before this
Imaging doesn't appear in the device manager and when i try to add under scanners or cameras it isnt found
Specific product is: G6-1155sa
My Laptop HP Pavilion has a verry annoying Problem . In My Windows 8 (64 bit) Action center i have this massage :
it said that the bluetooth driver isn't installed although i've installed " Ralink Bluetooth Software Driver " , But was no new !! This is device manager after installing it :
there is no bluetooth driver installed !!
then i've downloaded " Qualcomm Atheros Bluetooth 4.0+HS Driver for Microsoft Windows 8 " & tried installing it , then i got this massage :
Note That :
- at first , all mentioned above occured but bluetooth was working ( sanding & Recieving ) .. But now all the above occured in addition , bluetooth went out and no longer working.
- i've tried "hp Support Assistant" for updating my devices and it can't detect that bluetooth isn't installed.
- you can see in the picture of device manager an " Unknown Device" and when i tried automatic online search for device , there is nothing !!
-In The action Center Notification there is another issue that " hotkey utility key not installed " .
On my Vaio TZ150N, after installing Winows 7, everything works, except the built-in WebCam. I have tried re-installing the drivers from both Sony and Ricoh, but no use so far.
View 10 Replies View RelatedI received my Win 7 DVD, did a fresh install and it detected my webcam. However my webcam no longer works in either skype or MSN.
Skype reports the error 'cannot capture video, camera may already be in use' MSN returns the error 'cannot connect to webcam. Close any programs that may be using your webcam and chose setup audio/video'
The only thing I can see 'blocking' these apps is the Dell Webcam Console. I can't see any way to uninstall just the console, I think it comes bundled with the default windows 7 driver. I can see the path is
C:WindowsSysWOW64
undll32.exe OEM02Cvw.dll,ctCVWConsoleRunDLL32EP
I have changed the setting 'automatically launch webcam console when video is played' but still no joy. Tried uninstalling and installing old drivers but no luck either.
I upgraded my w520 from Win 7 to Win 8 last year with zero problems. Now I upgraded my W520 Win 8 to Win 8.1 via the store download. Except the webcam everything works fine.
In e.g. the Skype desktop application, Google Hangouts or the camera app, the built in webcam no longer works.
The green light turns on, but I just get the crossed out camra icon in e.g. the Skype video options. No video.
I see there are no drivers yet for Win 8.1 on the Lenovo support site for the w520 camera. In device manager it still shows the 2011 camera driver 1.1.0.1147 and says "This device is working properly."
But it does not work properly. How to get the camera to work or is it just a matter of waiting for a driver to be released eventually?
I tried uninstalling, reinstalling, camera is enabled in the Bios and permissions are set to give Skype and the camera app access to the camera. I also tried the W530 drives as was suggested elsewhere.
My SD card reader became non-functional after a recent upgrade of my T520 to Windows 8.1. Hardware troubleshooting said the Base System Device driver was not installed. I installed the Lenovo System Update software and searched for updates, but the driver was not updated. There is still a yellow warning symbol beside the Base System Device in the device manager. Discovered on the Lenovo driver download website that the card reader in my model is the Ricoh Media Card Reader but there is no driver compatible with Windows 8.1. Would the Windows 8 driver work or is there another solution to get my reader running again?
View 3 Replies View RelatedThe SSD in my laptop (HP Pavilion dv7t-6c00 CTO Quad Edition) recently died, so I got a new 120GB SSD and installed a non-OEM version of Windows 7 Home Premium 64-bit (this is because my SSD apparently isn't large enough for the Recovery Disks HP sent me -- long story). The past few days I've been installing all the necessary drivers, and just about everything is working like it did weeks ago. However, there is one problem: my TouchPad can no longer be turned off by double-tapping in the top-left corner.
I've tried three different Synaptics TouchPad drivers. The one found on HP's website (v. 15.3.11.0), the one I get when I click "update driver software" in Device Manager (v. 15.3.29.0), and the one found on Synaptics' own website (v. 17.0.19). I've checked out "TouchPad Properties" for all of them, and they've not been of any support.
For my current driver, however, when I click on "settings" under "Tapping," there's an area called "TouchPad Disable Zone Settings," that has a checkbox that says: "Double Tap to Enable or Disable TouchPad". However, the entire area is grayed out, and I can't check or uncheck the box (though, for what it's worth, it is currently checked). I candisable it manually in the "TouchPad Settings" tab of "Mouse Properties," but I'd prefer to just get the shortcut functionality back.
I updated my HP Pavilion g6-2293sa Notebook PC to Windows 8.1 advance release and the WiFi adaptor no longer connects to my router. The driver states all is working but no wifi is found; the PC crashes sometimes when running the trouble shooter.
View 7 Replies View RelatedI am having trouble playing DVD's on my HP Pavillion g7-2300 notebook. I've had this laptop for a long time and I was able to play DVDs up until a few days ago, but today when I inserted a disc I got this message:
When I click on "learn more" it brings me to a webpage where there are newer versions of cyberlink media software available for purchse. As you can see in the image there is an ad for one of the versions.
There was one update available for the Cyberlink PowerDVD software and I installed it. This did not fix the issue and I am still geting the same message as above. I also tried to play different DVDs.
I have PowerDVD OEM version 10.0.8.5723 and am using Windows 8.1. I've had Windows 8.1 for many months and as I mentioned I was able to play DVD's before with this windows version.
As far I as I can tell it isn't a trial version. It's asking me to buy an upgrade not a full version so this is what leads me to believe it's not a trial version.
Why the sudden change?
Unfortunately the Windows Media Player software on my laptop doesn't play DVDs. I've searched for Quicktime software, but there doesn't seem to be any available for Windows 8 or 8.1.
I can no longer use Simple Pass to log into a BOA on-line account. When I swipe my finger, a message indicates that simple pass is launching the address but nothing happens and the website doesn't open.Simple Pass came with my HP Pavilion DV6T-7000 CTO laptop with a 64 bit operating system. I currently use windows 7. Google Chrome is my default search engine but I also use IE on occasion. Previously when my Simple Pass worked, my BOA location was only opening in IE.
View 1 Replies View RelatedWhen i used to poen my webcam through cyberlink webcam or any other webcam software it shows "The connection to device was lost" or "Can't start videos". MY SYSTEM DETAILS ARE BELOW
OS NAME-Microsoft windows 7 ultimate
VERSION-6.1.7600 build 7600
SYSTEM MODEL-Hp pavillion g4 notebook pc
SYSTEM MODEL-X86 based PC
I have bought a new HP Pavilion 15-p056ne Notebook PC , which is hardly 25 days old. Now I am getting an error when i try to access Webcam. Imaging devicess option is not available in device manager.
View 6 Replies View RelatedJust purchased my new Pavilion dv7, and when I run the You Cam software, it tells me my HP TrueVision HD webcam is not detected. I have tried at this for several days now, at one point when I was trying to fiddle with the You Cam settings, the webcam light turned on for aprox. 2 seconds and then went dead again, since then it won't even let me into the YouCam settings.
Right now I'm becoming more and more convinced that this is due to my laptop being assembled outside the US. Need a fix for this immediately.
I have a HP Pavilion dv6t-6c00. I upgraded to windows 7 ultimate before which I had windows 7 home premium on which I could use the webcam but now it shows an error when I open cyberlink youcam "Warning, No webcam detected. Try plugging in a webcam into your computer now. If you are using an integrated camera, make sure that it is turned on". I've watched and tried all the steps except for the last step as the cyberlink youcam software doesn't allow me to click the configure settings. What should I do to turn on my webcam?
View 4 Replies View RelatedI have a hp pavilion g6-1d 60 us notebook , formerly running windows 7 Home Premium 32/64 bit operating system. I'm now using Windows Ultimate 32 bit operating system.
View 9 Replies View RelatedI just purchased a brand new HP Pavilion dv6-6130tx from Hong Kong four days ago and I was very content with it. The webcam quality was decent until yesterday when I wanted to use the webcam with pre-installed 'cyberlink youcam'. The capture was dark, even when I checked the 'auto lighting' feature. I have been searching this forum and the driver and support HP website for a fix, but there is no webcam driver I can use to re-install. I have tried updating the webcam driver through 'Device manager'. I even uninstalled 'Cyberlink Youcam' and installed 'HP Mediasmart webcam'.
Everything is dark and not even my face is recognizable, it only shows intense light. I am not sure whether it is a software failure or a hardware failure, but I can't seem to find the root of the problem.
After upgrade to 8.1 HDMI port didn't work. Followed instructions to correct BIOS and graphice driver; HDMI works - however Silverlight no longer working with DMS.
Get error 6036 in Silverlight which is Graphics device's driver certificate is invalid
Have checked graphics driver and is all up to date
Machine is HP Pavilion 11 x2
Graphics driver version 10.18.10.3366
I moved from Windows 8 to WIndows 7 Home Premium (64 bit) early-on and I've managed to get everything working EXCEPT my built in web cam.
View 4 Replies View RelatedI have reinstalled my original Vista Home Premium 32bit using the recovery partition. All is well, except I can't make the webcam recognizable to the system. Therefore, I can't use my Skype video call function. When I had the factory installed OS, Skype video call worked perfectly.
I have been all over the Internet trying to find software - YouCam, Quickplay, SP37849, SP46565, SP38361 and SP 45866 - all to no avail. None of the software would install, except Quickplay (SP38361).
In the Device Manager, under Imaging Devices, there is no webcam driver listed, only my HP 6700 All-in-One printer/scanner. Is there a possibility that only one imaging device can be installed at one time?
I have an integrated webcam and my HP Pavilion dv6 now shows this message with a yellow triangle "no webcam installed". How do I fix? My HP Pavilion is really starting to fail. Cyberlink won't let me update software because it claims I don't have the full version. Didn't HP install the full version with my laptop?
View 3 Replies View RelatedI'm using HP Pavillion dv6 1330-er. The problem is - both my mic and webcam mic were working fine untill yesterday's morning. The evening before i was talking with my friend on skype and then gone to sleep. When i woke up - both mic input and webcam mic weren't working. I am using Windows 7 Ultimate x64 ... Nothing like this happened before.
Webcam video itself working fine. Headphones working fine.Tried to reinstall driver - didnt work. Laptop was resting on the table, just like i left it in the evening. Have 2 different windows installed on my laptop (the another one is windows XP, not a single program installed, just drivers) - mics aren't working.
The same mic on different PC working fine.The system detects both headphones mic and webcam mic and the system shows when i'm taking headphones' mic in and out.
Product name: HP Pavilion g6
Product number: A3A09EA#ABU
My problem goes as following:One day I realised I cannot use my built in camera anymore. Tried reinstalling original preinstalled Cyberlink Youcam software, but as you can assume if that worked - I wouldn't be here. Then I tried troubleshooting according to HP guide. The problem is there is no category called "Imaging devices" at all.
I can place two bets on what could actually happen:
a) somehow I managed to delete basic HP webcam 101 driver.
The exact name of the device is: USBVID_05C8&PID_021E&MI_00
b) internal camera itself broke down (it's not unplugged cord issue - made sure myself)
I believe I could try installing basic separate driver for the camera, the problem is I cannot find one/cannot find reliable source. Could you send me/upload it for me?
if I could get Dell Webcam Center for my HP DV5Z-1000. If it is possible, I would like to know how.
View 6 Replies View RelatedNeed to re-install the Dell Webcam Center Software (not the drivers) on my laptop how to i get them?
View 1 Replies View RelatedA few days before I was going to shipping my Studio 15 off. I looked in the box and low and behold I found the Dell Webcam Center disk that I originally thought that Dell had forgotten to include.
Upon installation I found that the specific version of Dell WC that came with my Studio 15 is not the same one that you find at the downloads center on support.dell.com.
I could never get the downloaded Dell WC to work, even after numerous chats with technical support. No matter how many times I contacted Dell about this, they claimed there is only one version of Dell Webcam Center. Clearly that isn't true .....
I went on Dells site to configure an M1330 and it is no longer listed. Am I just seeing things or has this unit been pulled?
View 10 Replies View RelatedI'm wondering how can I run my XPS 1530 longer than couples of hours on 6 cell battery ?
how about 9 cell users ? Can your battery last more to 4 hours ?
With lowest brightness, only 1-2 tasks running, how many hours can you get with 6 cell and 9 cell? I get only 1.5-2 hr on 6 cell which is actually quite bad and have to take adapter everywhere every time...hoping to take less weight
dell is no longer offering the Nvidia 8600m gt, they only offering only the 8400 in this system,
is this just coincidence? they gonna finaly take out the m1530 and m1330 systems? and if we, happy customers of the m1530, get in some trouble with this graphics card, they probably gonna replace with a Studio XPS 16? of similar specs? cause they wont have 8600m for replacement
i dont know about u but i dont like te studio xps 16, first bigger, heavier, and not as stylish as the .
Over heating m1330 ->Dell tech replaced mobo/cpu/gpu ->Booted up and seemed fine -> Tech left ->Resumed my online gaming ->Mouse stopped working ->Plugged in another mouse, didn't work,
touchpad stopped working -> restarted PC, stuck on green loading bar where it says "microsoft corporation".
I've tried loading everywhich way, called dell support and ran through diagnostics. Conclusion is I need to reinstall vista so they are sending me Vista OS disc.
Does anyone know why the I7 is no longer available on the Z series? You can't option one with the I7 and
Sony Style said they have no information on when and if it will ever be available again