My Lenovo G580AH suddenly became unstartable. It tried to repair the system on startup but didn't finish this after one day.
Then I decided to recover my system using Recovery button. The procedure hangs on 16% with status that 1 sec remaining. I've tried this several times.Current file is different in each case but it is with "thl" extension. Path looks like "C:Program Files (x86)...*.thl" .
My Ideapad Z570 has been doing this for some time - the screen is black, lights are on, and won't wake up. I inevitably end up turning it off, so I lose my work.
I've delayed the sleep mode to reduce the number of instances...
when I try to install the Windows 8 copy I got with my Lenovo S440 in a virtual box environment
the installation procedure hangs on the windows splash screen. I never saw a Windows 8 installation
procedure before, so I booted my laptop from the installation media to check if it is corrupted.
This works fine. A loading dot circle is displayed under the logo after a few seconds and than after quiet
a while the lenovo wizard is shown... so it has to be an issue with the virtual box.
I attached a screenshot to show you where it hangs.
I have a Y560 ideapad and the hard disk recently crashed, I did not have enough time to take a backup of my windows copy. I have purchased a new hard disk and installed a fresh copy of windows 7 on it, downloaded all the drivers from the lenovo support website but I really would like to have done the one key recovery on the new copy of windows to set it back to the factory settings.
View 3 Replies View RelatedIt is not working, I try many times. When I click the onekey button, the onekey recovery window is transparent, after I click any button, then it dead. I didn't changing partition size and I didn't created a set of recovery DVD from the One Key Recovery. The onekey recovery not work.
View 4 Replies View RelatedI have the lenovo ideapad G510 and i get an error message when i trying to backup my system. the message is "current system can not support backup". why it doesn't work?
View 3 Replies View RelatedI own a lenovo ideapad Z570, and want to upgrade to a larger HDD(from 600GB to 1TB). The only thing bothering me is the "OneKey Recovery".
So, my question is : How do I make the OEM and Recovery partitions, just after installing windows7 on a new(blank) HDD to facilitate the "OneKey Recovery".
I have lenovo ideapad z580 with win-7 64bits...
I tried to to recover from onekey recovery key I use system recovey mode but at that time i got error:"The program cannot find service partition. This function currently unavailable ."
My system work normally... I wont my lappy factory default...
Link to picture ......
My lenovo B570 is 1month old, when i turn it on it hangs before the user account appears.. its stucked and just saying "Please wait" then i need to turn it off and turn on and on again till it works. Then sometimes when i shut down its also stucked on "Shutting down" I already tried reformatting and its still the same.
View 9 Replies View RelatedI have a problem with my notebook Lenovo N200 (0769). It has appear out of a sudden.
It was working fine a few days ago but at one point it stopped booting.
The bios correctly recognizes (apparently) all the the major components... but it hangs at one point after the message:
"Mouse initialized"
The weird part is that it would not even boot from CD. It just hangs...
I tried removing the HDD and booting from a CD and everything went ok. I mean that the system would boot from the CD. So my suspicion is that the HDD is broken.
I had purchased lenovo g580 core i3 a year ago. 2 days ago, after shutting my laptop, when i tried to switch on, usual lenovo screen appeared in the beginning, but does not happen anything after that. it hangs there, without giving any response.. there are 2 option i.e., to press F2 for setup and F12 for boot menu. but nothing happens even when i press those buttons...
View 3 Replies View RelatedI just got couple of days old Lenovo IdeaPad z50-75, running on AMD FX-7500.First I jsut now noticed that my CPU runs at 1.07 Ghz, before it was always over 2 Ghz or so which was good ... but maybe I touched something some where in powr settings or something and now it stays on 1.07 even when cpu pretty much utilised. I have set power plan to high performance and also Energy manager is set to high performance mode and Conservation mode is on. why it doesn't clock itself up ? I feel that it is slower than before.
View 4 Replies View RelatedIn a few days I'll get my IdeaPad U310, and since it comes with 4GB DDR RAM, I'd like to do a upgrade to 8 GB. I understand it only has one slot for RAM, so I'll buy one stick of course, but I don't know if it's the same size as used in a desktop PC, or is it some mini-sized RAM stick?
I also need to know the voltage of it, is it 1.5V or different?
Whenever I try to install the ELAN/Synaptics driver that I download from my laptop's support page I get an error saying: no Appropriate Driver to be installed.I'm on Windows 7 64bit...I've tried tons of drivers and I'm starting to get seriously annoyed. Non of them work all of them throw error messages and I'm getting more and more irritated with the obnoxious tap to click functionality. I don't even need the driver as I need the annoying tap to click disabled and maybe some kind of scrolling functionality would be nice if it's possible.
View 7 Replies View RelatedI bought my laptop from france so windows is in french ... I installed language pack core of system is still in french. How could I install legit windows 8.1 on it that is in english.
Not now but near future I want to replace that slow hard disk that is in it from shop to faster SSD and then again I need to know how to get that windows there ... back in the days it was easy, you had that number and you had the disk how does it work now ?
I recently recieved a y410p ideapad I ordered off the lenova website. However, it won't start up. When I try, it brings me to a blue screen with a sad face that says I need to do an automatic repair. This flashes for about two seconds before disappearing and the screen becomes grey and says "lenovo" and "Starting Automatic Repair". From this the screen goes completly grey, and has nothing on it. The computer stays this way for hours and the fan will continue to run. I've tried the reset button on the side and resetting the laptop, but no matter what I do I end up back at that grey screen.
View 5 Replies View RelatedI am new here and to Lenovo products. The IdeaPad Z510 has Core i7 quad core processor which supports upto 32GB of RAM. Can I upgrade the the current 8 GB to either 16 GB or 32 GB? Or it's 8GB max?
The specific model is Lenovo IdeaPad Z510 (59-398016)
I purchased this Ideapad Z50-70 laptop two days back. It was DOS based so I had to install Windows 8.1 OS myself. After installing the OS, I installed all the drivers for this laptop.
The display of the laptop is set to Full HD resolution i.e. 1920*1080. However, it doesn't look as sharp and crips as a normal HD display should be. The text and other things looks blurred. Also, the contrast of the screen doesn't seem well. Though the resolution is set to Full HD, I'm not feeling the quality smoothness and sharpness of the full HD display.
I bought the Lenovo Ideapad Z500 and I'm trying to boot from a USB drive in order to install Windows on it. When I start the boot menu I only see the hard-drive, the DVD and the network. I tried to set both UEFI mode and Legacy mode in BIOS but the USB stick does not appear in the menu when I boot. I put the image of windows with Windows 7 USB DVD Download Tool which formats the stick in NTFS mode.
I have the latest BIOS v1.21 and I tried with 2 different USB sticks: one 16GB USB 2.0 Corsair and with a 32GB USB 3.0 ADATA both on USB 3.0 and USB 2.0 ports on the notebook. I really haven't seen anything like this in my entire career.
I even downloaded the file efiootBOOTX64.efi and replaced the one that Windows come with on the specified folder on the USB stick ....
Why is so difficult to choose the USB boot drive on the newer notebooks? How can I boot from USB?
I have 4gb of ram in my model, it is possible to increase the ram of this model? how many memory banks available to me? in case I had 2 I must have to fit a 8gb or 12gb in total I have to take by force from another 4gb?
View 1 Replies View RelatedI've had my IdeaPad Notebook P500 for over a year, and rarely had an issue with it. Today, I accidently touched the F11 key, which happens to be the "Brightness minus" key.
Immediately, the screen went very dim, to the point where it actually hurts my eyes to be typing this.
I can adjust the brightness sliders up and down on the screen, using both the F11/F12 keys and the slider box available from the "Brightness" selection under "Settings". Even though the sliders go up and down, the screen stays the same very dark level.
Windows 8 64-bit is my OS.
I have uninstalled and re-installed the Intel HD driver.
I have shut down the laptop and turned it back on while holding the F12 (Brightness plus) button. It was useless, though.
I have rebooted several times.
Just got the y510p laptop and am trying to install Ubuntu so I have this bootable DVD and I wanted to try Ubuntu before installing as usual but I can't get the laptop to bot on dvd. On boot menu options there is only EFI and some kind of network options but no dvd. I tried following instructions here but no matter how many times I press F1 during startup, I can't get to boot menu and windows starts directly: [URL] Is it not possible to boot on dvd. The dvd is ubuntu 13.10 supposedly compatible with EFI and secure boot. I don't understand why there is no option to reorder boot devices like on all my older PCs.
I manage to get BIOS setup pressing restart and shift and then selecting UEFI firware settings and I do get to bios setups but again no way to find the option for booting on a dvd.
I bought a y510p ideapad from newegg a couple days ago and recently got it. i've been trying to set it up and all that, trying to get rid of the programs that came preloaded with the laptop because I wouldn't think i'd need them. I then shut it, put it down and opened it again and now it won't turn on. It seems like both the power indicator and the battery indicator light are both on, as well as the power button light, but the monitor itself is blank and i can't hear the computer being on. I've tried holding down the power button and resetting it, as well as removing the battery and using only the AC to see if it would turn on but to no avail. I'm worried i might have deleted something important, but I was mostly deleting programs related to shoddy media players and other services of the like. It's pretty upsetting I just got this laptop and it's already died on me!
View 9 Replies View RelatedI bought my y510p brand new from Lenovo about 11 months ago. About 2 days ago, my fan suddenly started making a very loud buzzing/grinding noise. Prior to this, it was perfectly quiet. The fan makes this noise inconsistently, and at this point, leaving it on a flat surface keeps it quiet. However, any tilting or jostling of the laptop makes the fan start buzzing again. I have noticed that running the dust removal utility will stop the fan from buzzing, and this seems to be the only way to return it to producing a regular sound after it has started.
I really don't think my fan needs to be replaced, but I am unsure what is causing this problem. I have never dropped my laptop--and its spent almost its entire life on my desk. The only thing that's changed is I moved it after it had remained in the same spot for several weeks--because I am currently traveling.
The inconsistency of the noise and the newness of my computer tends to make me think the fan hasn't worn out yet.
Recently I purchased a Lenovo Ideapad Z510, model name 20287, MO: YB03120328. According to the specification from my reseller (Dutch webshop [URL] and the Lenovo box it was shipped in, this laptop should have a 1000GB hard disk + 8 GB solid state memory (SSD) for caching. My problem is that I am not sure if the 8 GB SSD is working.
The SSD does not show as a drive in "My Computer", it does not show in Window's Disk Management utility (see Figure 1), Intel's Rapid Storage Technology does not show the possibility of using the SSD to accelerate performance (see Figure 2) and when running ExpressCache (with the command "eccmd.exe -info") the program tells me "HFS Volume is not mounted" and "ECCmd exited with error 0x10df (4319)".
All these clues lead me to believe that in fact no 8 GB SSD is installed, or if it is, that it is not working properly. Any additional ways of testing I could use to confirm it is or is not working?
So my battery won't charge. I've only had this laptop for 9 months and 2 weeks ago the battery stopped charging.
View 3 Replies View RelatedThe first week my Y510p worked perfectly, I had a little trouble to install linux but I finally got it. Then, suddenly the laptop stop working. I restarted the laptop and it didn't want to start again... I got a completely black screen, I know it is on because of the keyboard backlight. The screen is completely black, there is no way to get into the recovery menu or BIOS setup. I expend 1 hour last week with lenovo support trying to get it into de BIOS or recovery menu in all possible ways and nothing works. What can I do?
View 9 Replies View RelatedMy ideapad N580 keeps going to limited connectivity. Says I have a Braodcom adapter...
View 9 Replies View RelatedI recently just received my Ideapad y510p laptop back, and I unplugged it and the battery dropped to 60% but when I try to charge my laptop, it'll just stay at 60%. The battery says its plugged in but it won't charge.
View 7 Replies View RelatedI'm trying to Install Debian GNU/Linux on my Windows 8 Ideapad Z710, and I can't even get my laptop to boot from external media. From the InsydeH20 Setup Utility, I've so far disabled Secure Boot, set Boot Mode to UEFI, enabled USB Boot, enabled PXE Boot to LAN, and set my EFI boot order to 1) EFI Network 0 for IPv4, 2) EFI Network 0 for IPv6, then 3) Windows Boot Manager (no other options). I'm not actually trying to boot from a network, I just want to boot from the onboard DVD drive or my USB DVD drive. When I boot with these settings, I get the error: EFI Network 0 for IPv4 (...) boot failed, then a similar one for IPv6, then it boots to Windows. Why can't I boot from DVD or USB?
Another thing I've tried is setting Boot Mode to Legacy Support and Boot Priority to Legacy First (with Secure Boot disabled) which results in my laptop booting to straight to Windows even when USB ODD is first in the boot order.