I keep getting a Windows Boot Manager Error 0xc000000f The boot selection failed because a required device is inaccessible.
It happens as soon I turn the computer on.
I have a Acer Aspire 7736z-4809....
I have HP Pavillion g4 windows 7 64 bit laptop.I had installed android tool kit and restarted my laptop.After that my laptop is not booting UP.I am getting below error "Status: 0xc000000f".
Windows Failed to start. A recent hardware or software change might be the cause. To fix the problem:Insert your Windows installation disc and restart your computer.Choose your language settings, and then click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Status: 0xc000000fInfo: The boot selection failed because a required device is inaccessible.I dont want to lose the data.I dont have windows 7 installation CD.How do I resolve this.
I have a Acer E1 522-3657 computer, which my son set-up for me but did not make the recovery disc(s). The unit is just outside of the warranty period when the hard drive failed. The hard drive just makes a clicking noise and after the logo screen appears it goes to a blue screen with a box that has the following message with in, "Default Boot Device Missing or Boot Failed. Insert recovery Media and Hit any key.....Then Select 'Boot Manager' to choose a new Boot Device or to Boot Recovery Media.
I have installed a brand-new Western Digital 1T Sata3 harddrive to replace the Toshia 750 GB original Drive. After turning the computer on and at the logo screen I press and hold F2, this takes me to the InsydeH20 Setup Utility Screen. I see under the "Information" menu that the installed harddrive model and serial number appear. I see in the "Boot" menu, Boot Mode: "UEFI" and Secure Boot: "Enabled".
Under the "Exit" menu, Exit Saving Changes is highlighted. When I press F10 a "setup Configuration" box appears asking to save configuration changes and exit now? "Yes" is highlighted to which I hit Enter and are returned to the "Default Boot Device.......page. I then hit ecs twice and are at a black screen with the message No bootable device -- Please Restart system_appearing in the upper left corner of the screen. I then push and hold the power button until the computer shuts off.
I have ordered from acer the "Acer E-recovery Media Disc Set", which is specific to the SNID of my computer. I have not attempted to format the new hard drive in any way. I assume the E-recovery Media Disc Set will handle that operation due to the multiple partitions required.
In view of the above situation, do I need to set up the computer in any way before I start to utilize the E-recovery Media Disc set. I assume the Media will be on CD's. The computer was running Win 8.0 which was updated to Win 8.1 and was running very well, very stable.
Acer V5, spilled coffee on keyboard. no problem at first, then lockup, and on restart get the No Boot Device or Boot Failed. Am using my old laptop now. Can I get a download, save it to thumb drive, and use it to restart/reboot my Acer?
View 2 Replies View RelatedMy Ideapoad P500 is approximately 16 months old (so the warranty period is out, obviously!) A couple of nights after a reboot I got the message "Repairing Hard Disk errors. This could take an hour or longer."... or something very similar. The laptop hung up at that message for more than 18 hours.
I did a hard reboot and now get the message "Checking media" followed by the error "Boot failed." This leads to the message, "Default Boot Device Missing or Boot Failed."No I don't have any recovery media.Yes I have pretty recent backups so that is not a problem.I've got an enclosure that I can use to hook my laptop hard drive up to so I can see if the drive is even readable.
Now here is the 64 thousand dollar question... how do I get the hard drive out of the laptop? I have taken the five screws out of the back. At that point, I think the DVD drive should slide out, but it does not.how to get the hard drive out?
I have a y500 Lenovo gaming laptop with Windows 8, and for the past couple of days, each time my laptop is put in hibernation or powered down, whenever I turn it back on it gives me this message:
"Default Boot Device Missing or boot failed Insert recovery media and hit any key Then select boot manager to choose a new boot device to boot or recovery media."
Then it brings me to a page with 3 boot options, and only the Windows Boot Manager works. I'm doing scans and hardware scans but so far nothing is being found. This laptop is less than 2 months old so I really don't think it's a hardware problem, and I haven't downloaded anything recently that may have messed this up. I would contact Lenovo but I'm unsure if this is an issue with the laptop, or Windows 8.
I get the error in the Title after i tried to flash the latest BIOS update for the Z510. I can press ok and then get into the boot manager but i cant choose anything there. Also I cant boot from a Disk with e.g. XP on it.
I also tried the Inside BIOS crisis mode (fn+r) with the BIOS file on my USB drive but it doesn't work and tries to access the file on the USB drive but boots normally instead to the error again. (Couldn't try it with removed battery as I have to remove the whole back to remove the battery on the Z510).
Is it possible to control the fan speed on my Acer Aspire 7736Z-4088 laptop? If so then how is it done?
View 2 Replies View RelatedI replaced the HDD in my Aspire 7736Z. I ordered the disks FROM ACER. I keep getting the "No Operating System" error.
The disks that were sent by Acer will not boot and I cannot figure out how to boot them from a "bootable disk"
The BIOS sees the new HDD and the DVD player but will not boot.
I have a Pavilion dv7 1245dx with Windows Vista 64 Bit bought 2009 at Best Buy. It slid off the arm of the couch onto a carpeted floor while shut down. Next day started ok, got into yahoo, facebook, then kind of froze up. Eventually, would not do anything, manually shut it down, started it back up. Black screen, 'No Bootable Device-Insert Boot Disc And Press Any Key'. It will not accept recovery discs that I made after purchase. Start up test ok, memory test ok, hard disk failed 'Boot Drive Not Found'. Caps lock light is blinking. I saw something in a forum about resetting or reseating the hard drive but no explanantion how to do it.
View 9 Replies View RelatedI have problem with my Acer Aspire 7520G. When I turn it on, after memory check and disk check I got messages:
Resource Conflict PCI Serial Bus Controler in slot 01
Bus:01 Device:04 Function:00
ERROR
Bus:01 Device:04 Function:01
ERROR
Bus:01 Device:04 Function:02
ERROR
Bus:01 Device:04 Function:03
ERROR
Bus:01 Device:04 Function:04
ERROR
after this wont boot neither from HDD nor CD/DVD. Just blink currsor apears.
After a few of restarts, if I got luck, it will boot up "normally". I checked in Windows system that Bus 01 Device 04 is acctualy
Ricoh 1394 OHCI Compliant Host Controller at Function 00,
SDA Standard Compliant SD Host Controller at Function 01,
Ricoh SD/MMC Host controller at Function 02,
Ricoh Memory Stick Controller at Function 03,
Ricoh xD-Picture Card Controller at function 04.
So I am trying to play Dragon Age Inquisition on my newly aquired Acer VN7-571g. It's equipped with a gtx 850m. When I'm trying to start the game I get this error message "Detected NVIDIA driver is 333.17. The required driver version is 340.52 or later. Please update your drivers at geforce.com/drivers before playing the game" Now the problem is that the driver from acer is version 333.17. If I try to install a newer driver directly from geforce it won't recognize the dedicated GPU and will run on the integrated intel HD graphics in stead.
View 9 Replies View RelatedResetting went without problem.
View 1 Replies View RelatedI have installed Windows 8.1 on my laptop HP pavilion G6 model 2241sa. Almost all drivers were installed automatically. Additionally I downloaded from HP support site all drivers for similar model (2241nr).
I installed everything one be one. All works BUT ONE device is not recognised... Here are some details of it:
It says Unknown device (in Other devices group) with yellow exclamation mark. Location - on PCI Express Root Complex. bios device name - _SB. PCI0.ACEL, hardware ID - ACPI VEN_HPQ& DEV_0004. That's all i have about this device.
How to establish which driver I need and for which device?
My laptop was working but then when i powered up the first screen that shows is it wants a HDD password. can not start windos 7.
View 2 Replies View RelatedI have an acer laptop e1-571 with windows 8. the mb failed ordered a new one installed it. on boot now i get no bootable device. The bios shows the hard drive and its the first in the boot order. If i hit f12 after powering on to access boot options the 3rd choice is efi device windows boot manager. If i select that it boots normally and runs fine. is their a way to boot the machine without having to hit f12 every time and selecting efi device to boot to windows? i tried updating the bios as well.
View 2 Replies View RelatedProblem-- When you Turn on my acer 5315 laptop a blank black screen comes up after the acer logo appears. If you press any key a loud beep noice sounds.
Solutions I have Tried-- Well i started with using the preloaded restore to factory defults and I got an error message at about 99 percent. The error was- Restore Failed- Reason oxd0000001d - or close to that. I figured maybe the backup partiton was screwed up so I pulled out the old recovery cd's I purchased from acer. The same thing showed up. I then figured i should call acer. I called and they told me to use the acer post disk formatter. I tried that and it still did not help the problem. I have no where else to turn so thougt maybe you guys could help.
By the way This is some of my system specs--
Acer 5315-
Hitachi 80GB hard drive-
Windows Vista Basic
I have an acer aspire E1-571, Its a nice little unit, how ever, the 500g hdd in it has failed, it wont even clone, just wont do anything. I bought it used about 6 month ago, it wouldnt let me run recovery discs off, I installed a new hdd and borrowed a copy of w8 thinkin it would activate it, but no, it wont activate, The edition that was on was w8.1, what can i do to get it up n running as it was, i dont want to buy a new key for it, i like w8 and would like that back on, i have ubuntu installed as a temp measure.
View 1 Replies View RelatedI attempted to update the BIOS in my Acer Aspire 5315 laptop to no avail, the winbios program froze straight away, while erasing the BIOS I think. So since then I havn't been able to start the laptop, no fans, but does blink a red LED beside the little light icon when left for longer than 10 seconds or so when you press the power button. I've tried the fn+esc method to boot it to flash the bios but nothing at all, tried it with USB and CD-ROM. I've tried removing all the hardware and starting it, I've also tried resetting the CMOS, still no luck.
I'm thinking that the red LED might be a little indicator of hope, or is it maybe the capacitor filling up
I have an acre aspire 5535. I cannot login and keep going round in circles with the message which says "the user profile service failed to login. User profile cannot be loaded". I have switched off and opened again but no change.
View 1 Replies View Relatedi have an aspire one. AO725 is the model. my wireless internet driver went wacky when i updated to widows 8.1 and i re-installed the driver. a day later it is not connecting to the internet again.
View 1 Replies View RelatedWhere is Boot from USB option in UEFI boot device list in Inspiron 17r SE?
Mine only shows Network in UEFI boot list?
I have a Inspiron M5040 (mid 2011) I ran a system test and was informed that there was a drive critical error with a hard drive ST95032 5AS SATA Disk Device FAILED... What does that mean, is it fixable and how much?
View 3 Replies View RelatedToday I found an error in device manager "unknown usb device descriptor request failed" with error code 43. Then I found out webcam doesn't work/disappear. So I try to fix the problem and reset bios setting seem to get it back.
But in windows when I try to use webcam, at first it seem to work normally but after a few minutes it disappear and reappear immediately. Repeating this a few time it was again disappeared with the same "unknown usb device descriptor request failed" error.
Repeating the same bios thing again and it's back, running normally. Then I leave webcam program on(cyberlink youcam) to observe. It working fine for around ten minutes then it was repeating disappear and reappear again and this time it blinking like in this video [URL] .... so I turn off webcam, leave it for minutes and running youcam again and it's back to normal(Still working normally when I post this (working for around 25 minute now)).
What cause this. Does this mean my webcam is failing?
Also my webcam LED indicator flickering rapidly like the light bulb when turn webcam on and stop flickering when I point the bright light to the webcam. Is this normal?
Right after I post this it disappear and reappear again but only one time not repeating.
Now "unknown usb device descriptor request failed" is back and webcam disappear again.
My new XPS 14 is experiencing problems after going into sleep/hibernation mode. Each time the computer goes to sleep, I get a message from Intel Rapid Storage Technology that acceleration has been disabled. Basically, when this happens, the SSD drive becomes inaccessible and no longer recognized by the computer (disappears from device manager). In order to get it back, I restart the computer, which brings the ssd drive back up in device manager, and then I have to disassociate the drive and re-enable acceleration after that.Dell has put in a service order to have my SSD drive replaced.
View 1 Replies View RelatedI swear it is always something with this product. I made a bootable USB flash drive and put Windows 7 on it. I have 2 M1330's, the only difference between them is CPU/RAM/HDD. One of them boots just fine off the USB drive, the other doesn't. They are both running the A15 BIOS. What am I missing here? I've compared the BIOS settings side by side and they are identical.
View 6 Replies View RelatedI have upgraded to Windows XP and reinstalled all the drivers I need from the Acer website. Wireless networking is fine.
The problem is, when I slide the Bluetooth switch on the front of my computer while a device (Nintendo Wiimote) is waiting to connect to the computer, "No Device" in green text shows up on the bottom of my screen. I think this shows the driver is somewhat working and the hardware is detected.
The LED indicator beside the switch does not light up.
I go to my control panel and double click the "Bluetooth Configuration" icon, nothing happens for a while, then a single dialog shows up saying "Bluetooth device not found. Please verify that your Bluetooth device is properly connected and turned on." showing only an OK button.
Inside the computer management window, under device manager, a group called "Bluetooth Devices" exists, and inside is something named "Bluetooth Bus Enumerator". I have right clicked on both and tried "Scan for Hardware Changes" and nothing happened. The properties show that "This device is working properly"
Drivers Provider is Broadcom
1/11/2006
Version 5.0.1.1500
Yes I have restarted my computer several times.
All of the above actions were performed four, once with my finger holding the switch and once without, then again with the Wiimote in a waiting-for-connector mode.
My Wii is turned off with the power supply unplugged, there are no other devices with Bluetooth in my house.
how to get Bluetooth working.
There are other problems with this laptop, the card reader only supports SD cards, not Memory Sticks or xD cards. That's a problem for another day. However I would never recommend this laptop and this brand to anyone, but it was pretty cheap.
I have upgraded to Windows 7 x64 (a fair while ago) and rencently it has started to come up with "No sound device installed" over the speaker icon in the sys tray.
This happens about 50% of the time when the computer has started up.
It never has any issues once the sound is working.
When the sound is not working "Sound, Video and Game Controllers" in Device manager is missing and i cant find the "Reltek HD Audio" device any where else in device manager.
It's just had a freash install of the OS and is still not working reliably.
It's got the latest Win 7 x64 drivers from RelTek
I cant find my bluetooth device in my (acer aspire s3 ultrabook i5 2467m 13.3) before i am using window7 it works properly but now im switch to windows8.1 and i cant find my bluetooth device even in device manager. i also used scan driver but nothing happend..
View 4 Replies View RelatedI recently brought a Aspire E5-411, in Thailand, with a Linpus Linux OS. I installed my prefered OS Win7 x64. I managed to locate and install the hardware drivers. The strange thing is there is no bluetooth device showing in device manager. Is it because
(a) there is no b/tooth adapter on this model,
(b) the adapter is faulty,
(c) I need to install a driver to activate, or
(d) other?