Everytime windows updates my Acer AO722, windows will not start. This started after I did a factory restore. When shutting down windows updates my system and then windows 7 will not start up after a restart.
View 1 RepliesIn November of 2012, my husband bought me an HP 2000-2b09 laptop (Windows 8 came with it). Anyways, a few months after my husband bought the computer, Windows 8 began slowing my computer down causing it to crash. A friend of ours had a copy of Windows 7, so I out that on there. It worked fine for almost a year until about a week or so ago. My computer somehow got Trojan and Malware viruses that I couldn't get rid of it no matter how hard I tried. That slowed my computer down dramatically.
So bad that I can't even play games on it anymore (I'm a huge Sims fan). I recently tried putting Windows 7 on it again. It worked, but the only issue is, it won't allow me to connect to the internet. I need to install the drivers for it, but I need to be connected to the internet to do it. Is there a way for me to get Windows 8 back on it without buying it? I don't have the money to buy that either. My sister purchased a "Windows Recovery Disk" for my father a few months back. I want to borrow it, but I'm not sure it would recover Windows 8.
I have an AO722 with Windows 7 64 bit.
I am trying to connect by HDMI to a TV.
TV says no signal.
Have toggled through all of the options with the fn f5 and f6 keys and also the Windows button/P also.
My screen would go black on some options but still no signal on the TV.
Went in the Device Manager to see if the HDMI port is there with the USB's.
Could not find. Is this possible issue or something else?
My Acer is having real trouble with Windows Updates. They download, then some of them install and I have to restart. BUT then it tells me most of them have failed, and now I have 56 updates that I'm told need downloading and installing. When I do the update/install I don't do anything else as the laptop is just so slow at the best of times.
Should I swap from Wi-Fi to an Ethernet cable?
My Acer laptop, (not a touch screen), specs are: Aspire V5-123-12104060nkk, Model ZHL Windows 8.1 - AMD E - Series (E1 - 2100, 1 GHz, 1 MB) - 29.5 cm (11.6") LED - 16:9 HD - Active Matrix TFT Colour LCD - ComfyView - AMD Radeon HD 8210 - 4 GB DDR3 SDRAM - 500 GB Serial ATA. It's a 64-bit.
My Acer is having real trouble with Windows Updates. They download, then some of them install and I have to restart. BUT then it tells me most of them have failed, and now I have 56 updates that I'm told need downloading and installing. When I do the update/install I don't do anything else as the laptop is just so slow at the best of times. Should I swap from Wi-Fi to an Ethernet cable?
My Acer laptop, (not a touch screen), specs are: Aspire V5-123-12104060nkk, Model ZHL Windows 8.1 - AMD E - Series (E1 - 2100, 1 GHz, 1 MB) - 29.5 cm (11.6") LED - 16:9 HD - Active Matrix TFT Colour LCD - ComfyView - AMD Radeon HD 8210 - 4 GB DDR3 SDRAM - 500 GB Serial ATA. It's a 64-bit.
My laptop is Dell Studio 1558 with Windows 7 as the OS. The issue is that now when i try to turn on the Laptop, its go'n to "Windows Error Recovery" with following options to enter:
"Launch start up repair"
and
"Start windows Normally"
I tried both the option at two different times but its not fixing the error or starting windows normally and its stuck at "Starting Windows" screen. Then I tried to use F12 - Boot option- Diagnostics for which I am getting the following errors:
"Error code 0142Msg: Error Code:200-0142Msg: Hard Drive 0 - self test unsuccessfulStatus:79"
Now when i try the same option [F12 - Boot option- Diagnostics]"Error code 0146Msg: Error Code:200-0146Msg: Hard Drive 0 - self test log contains previous error(s)What should I do to resolve this issue?
I just bought my Acer Aspire V5-552g a week ago. Everything seems to be working fine. However, Windows advised me to install updates which I did. After installing the updates the touch gestures are not working anymore. I tried updating my drivers, which I downloaded from the Acer support site, but it did not work. All gestures are not working. What I need to do. Is this a result of updating Windows? How can I undo the update?
View 3 Replies View RelatedI have an Acer Aspire V3-572g. My laptop came with windows 8.1 installed already. Currently, my pc is being reset to factory settings because I can not figure out how to keep the hdmi from going out after windows updates. The only way I can keep get the hdmi port to work is the factory reset it. The only way from keeping the hdmi working is by turning off windows updater. However, I'd like to figure out how to keep the hdmi working without doing so. My graphics card is Nvidia 840 M. Here are a list of things I've done after my laptop stops recognizing the hdmi.
Uninstall and reinstall the display drivers, both from intel and Nvidia
Update the drivers to be up to date
Downloaded intel's utility manager to keep driver update to date
Downloaded factory installed drivers from Acer's website
Contacting microsoft and have them remotely connect to my laptop
Restored back my laptop to previous working conditions (although the hdmi never worked by going to a restore point)
Swapped hdmi cords and displays
After several hours of researching and trying different things I'm stumped. I bought this computer with the sole purpose of connecting it to a TV. I've also had this issue with another laptop which I returned. This problem isn't a hardware problem as I'm connected to the same monitor with an old desktop using the same cords. I'm guessing there is a compatability issue with windows and the display drivers when there is an update.
Every time I run the Client System Update tool and check for updates I get the error message "Check for updates failed"
I have a Dell Latitude E6430 running Windows 7 SP1 64 bit and I am connected to the internet...
Acer travel mate 4060 * upgraded to 2 GB ram and windows 7 Home premiun 32 bit has just been recovered from a crash.
I am sending this message from the same computer. My built in speakers are not functioning . However when I connect an external speaker with a USB connection, its working perfectly well. I can watch videos and play music. I checked and it appears that there is no sound device installed.
it's happened in the past while gaming, but not as much as recently. while carrying the laptop recently I believe I broke the fan somehow and it's causing it to overheat even more. I believe the best choice is probably replacing the fan, but I've found it is extremely difficult to find the exact fan in my laptop. How compatible does the fan have to be to be replaced? Is it absolutely necessary to replace the fan?
View 3 Replies View RelatedI bought one of these because of its rep, its long battery life and its weight. But there's a huge problem. Whenever I have four or five Internet windows open OR I have on internet window open and try to open a word doc, the computer freezes - really freezes, not even control alt delete works. When it restarts it does so from the safety mode. I've brought it to Staples, I've contacted Acer and Microsoft. They each sound surprised and Acer blames Vista and Vista blames Acer and Staples says I'm out of luck.
View 4 Replies View RelatedI'm on Windows 7 64 bit and the Microsoft ACPI-Compliant Control Method Battery device is causing my Aspire E5-551 to freeze. If I enable the device and I try to run my laptop on battery it freezes, but when it's disabled I can run on battery perfectly fine.
Now I don't mind having it disabled since it fixes the problem but when I disable it then I have no way of telling how much is left of my battery.
This is a brand new laptop, a little over a month old so I haven't done any damage to it. I sent it in to get fixed but when I received it back from the Acer repair center all they did was re-install windows which did actually fix the problem for about a week but the problem came back.
I am experiencing a system freeze at windows welcome screen or on desktop at random moments for more than 6 months, and it is because of the intel hd graphics, so at the moment I don't have the driver installed.
View 1 Replies View RelatedMy 5050 crashes XP every few minutes, maybe half hour sometimes with an 0x07 blue screen.
I have temporarily taken to booting ubuntu (llinux OS) off a USB pen drive and it works fine, however, i might well see the HDD and DVD drive in Ubuntu but its not long before they dissapear from the visibilty of the OS. Of course this would be a crash in XP but not under these circumstances.
I can hear that the hdd is running and the cd drive will open so its not a power issue or temps.
I think the mobo ide controller is falling over or connections associated with it.
I cannot identify the ide controller (if it is a seperate component to the mobo itself) or investigate problem further without some knowledge & ideas from experianced members here.
Even trying to take this notebook apart seemed difficult & I gave up after a few screws were out. Anyone got a strip down guide/service manual and more importantly some ideas on my fault.
At first I was thinking of maybe a dry joint on the HDD connection but that was before I ran Linux OS and discovered I was actually losing visibility of both IDE hardwares. Not just the HDD, and not losing power either.
I just got my Aspire V touch, so I don't understand why the Acer applications keep crashing when I try to open them. All of my other apps open fine without crashing. (Acer apps i.e.: Acer Recovery, Acer Quick Access, etc.) Why only Acer apps are crashing? I'm trying to make my recovery files.
Also, what is AOP Framework? It always crashes when my laptop is waken up from it's sleep. Can I uninstall it?
I bought a manufacturer refurbished Inspiron 5720, i7 3612QM, 8GB RAM. The BIOS is currently A12. When I received it, it had a bad hard drive. Dell sent me a new hard drive under warranty, but it was blank and I had to use a recover CD to reinstall Windows 7 Home Premium 64-bit. I have installed every recommended and updated driver for all of my hardware components. But, everytime I install the HD 4000 drivers, the system starts to freeze up.
The system runs fine with the Standard VGA driver, but I can't run anything that requires better graphics. I have tried installing every version and they all cause the system to freeze. Sometimes it freezes during the boot up and sometimes it will run for up to 2 minutes before freezing. And by freezing, I mean that it just stops working. Sometime if I let it just sit and wait, it will shut off automatically. Other times, it just stays frozen for hours and I have to hold down the Power button to turn it off. When it restarts, it boots to the Safe Mode option screen. I then have to boot to safe mode and restore the system to a previous recovery state.
I have an AO722-0825. I'm looking to increase the speed and performance of this machine, and so I wanted to upgrade the memory (and possibly swap in a SSD). So my questions are:
1) Is it possible to upgrade the memory on this machine?
2) What brand of memory does Acer?
3) taking out the hard drive and putting in a solid state drive?
I purchased my Acer Aspire 7726-9829 in August 2013 and haven't had any problems at all until a week and a half ago. When running games, it appears my computer is heating up and experiencing a hard crash. (This only happens when running games. Browsing the web or watching movies doesn't cause the problem.)
At first I thought it might be the power settings, so I picked up a new power supply and set my computer to 'high performance'. (Which fixed minor clipping issues. The graphics now run perfectly for about five to ten minutes before the computer crashes.)
I have a problem with my laptop, it won't boot up due to "Operating System Not Found", but I've used it already for several times but just yesterday it turned out that "Operating System Not Found". I've tried to check whether the hard drive is a problem and slave it to another laptop but it's still working, it will boot up well in another PC. Now I tried to insert a bootable USB drive just to reformat it for it to work again, but still it won't work. My bootable USB drive is detected and can be found in the boot options but if I select the drive for boot it still says "Operating System Not Found". Then I went searching over the net then I found something that might work like having it boot in Legacy BIOS mode, it boot up then but the problem is my display is distorted and fading, there are lines and overlapping display.
View 2 Replies View RelatedIt still did not solve the issues with my USB ports. I have noticed that the exclamation mark is no longer there but still all my USB ports are still not working.
View 1 Replies View RelatedI have Accer aspire e1-571 i want to know abaut base system device, i have installed all drivers in my laptop but base system device driver pending i want to knw how to install it. os win 7 pro 64 bit
View 8 Replies View RelatedI have an acer M3 581T which I bought about a year ago. Now, windows crashed and said there was a file missing. I am no longer able to boot up the system, I've tried the erecovery (alt f10) but it just proceeds and says it's not able to boot. I have no recovery cd/usb at hand. It is of my understanding that this ultrabook has two harddrives. One SSD on which the operating system is installed and one HDD with the other files on.What do I do to make it work again? I do not care if all my files are lost.
View 9 Replies View RelatedI have a Dell Inspiron 3537 few weeks old. Originaly was Win8, but I update it to Win8.1.
After I registered laptop, next step was to partition my C: partition on two parts, partition C (OS), and D (Data). After that I successfully installed all programs I need. And after few days problems started with few BSoD. There are few problems and I will explain all of them.
My Dell checkup "Blue screen troubleshooter" reporting every few days one or more BSoD with explanation: "The unknown driver (C:Windows/system32/drivers/atikmdag.sys) appears to have caused a system crash. Complete the tasks below to prevent unexpected shutdowns in the future."
On same My Dell checkup I try to run "PC Checkup", and everything appear OK, no problems reported. Custom scan on only ATI video card (ATI Radeon HD8850), and result is "Passed".I also run build in DELL diagnostics (Boot menu) and there was no errors, and also Dell online diagnostics and everything was fine.
I try to install new driver from DELL website (AMD Radeon HD 8850M driver 13.151.0.0), but during installation, screen blinked few times and then went off. I thought that this is OK since video driver was installing. I left Laptop for one hour to "finish installation" but noting happened. I turned off laptop by pressing ON/OFF button for 5 sec, but after that laptop don't want to restart. Here I noticed other problem I will share with you in the moment. Fortunately, I installed Acronis True Image 2014 so I was able to restore a system. BTW, same driver version was already installed acording to "MSINFO32).
Now, my system is running, I can still see BSoD warning in My Dell Checkup, but actually I don't actually see this BSoD. Strange. If I right click on desktop and then click on "Graphics Property" or "Configure switchable graphics" I get this warning:
Second problem. During my laptop beforehand explained "BLACKOUT", I tried to use Windows Recovery. I tried "Refresh" and "Reinstall" and both times I got message:
"Could not find the recovery environment. Insert your Windows installation or recovery media, and restart your PC with the media".
If I try to use "Dell Backup and Recovery", I got message:
"Dell Backup and Recovery has not been able to detect the recovery Partition on this computer. It may be missing or corrupted. To recover your computer to the original factory state and restore the Recovery partition, please use your System Recovery Disc." etc...etc...
I don't have any of this discs coz OS was preinstaled. So, basically I can't use any facilities to recover my laptop because I don't have factory recovery media or recovery disc. Fortunately I'm using Acronis, but that's not a point. I want something to recover my system to original, factory state.
Actually, Windows Restore facilities are OK and I can restore to some point I created.
BTW, my hard drive is partitioned on 7 partitions. Originally there were 6 partitions with huge C: partition. I split this one on two.
And also, since this BSoD is likely caused by video driver, how can I safely update this driver. As explained before, after first try I had disaster. Can I try to install new driver for AMD Radeon HD 8850M from ATI site?
Just got the laptop today. Went to Windows Updates out of the box and boom, it shuts down. A LOT. I managed to get the 64 bit updates in but it keeps shutting down for the rest. System Restore doesn't seem to manner.
The bottom of the laptop is hot to the touch after 2 hours worth of idle usage spent on updating windows....
Specs
Intel Core 2 Duo Processor T6400
4GB (2/2) DDR2 667 SDRAM
320GB hard drive
Blu-ray Disc Drive
9600
NVIDIA GeForce 9600M GS
The only changes I've made is removing some annoying bloatware, but I didn't expect problems this fast and this early.
I hope this is not a heating issue because I would hesitate to get a replacement. 6930 owners...have you had this problem before. Does it get hot a lot? I hope it doesn't explode if I try to play Left 4 Dead on it.
I have been trying to use the Live Updater and it is saying there are no updates I have installed the Acer Updater which is saying no updates and I can see that my Laptop has lots of updates from the software and drivers website.
View 3 Replies View RelatedWhen updates are posted on Aspire Support Page my Aspire Switch 10 will not complete most downloads I attempt. It downloads anywhere from 60% to 95% of a particular download, then goes no further even though it indicates it is still downloading. I have left it in this "downloading" state for 10 minutes with no further progress. Of the few smaller zip files it did download completely, I got an error message of "Unspecified Error # 0x80004005" when it tried to unzip some of those.
View 1 Replies View RelatedCame to a point when I should completely restore the OS on my Acer Aspire 4752. Neither through Alt+F10 nor through eRecovery am I able to get around a Notice with the following "please complete operating system setup process before doing system recovery". There is only one option of this notice, that is to ok it and then the current Windows 7 Home Premium OS starts and I am not able to get out of this viscous circle. The OS works and is completely set up, so I do not understand what am I prompted to do. I see a number of postings out there, but no solution. Local Acer does not seem to know anything about the problem nor it's existence.
View 5 Replies View RelatedHP Pavilion dv6 1352dx, my son is a scientist who set up this his old (to him ) laptop for me as an gift,and it is now running an ubuntu os,can i download driver updates as if it were still on 64 bit windows ....
View 2 Replies View RelatedI have the latest drivers, freshly installed, but when I scan again the system, it says I need to install these (see image). I download them, I install, I reboot... and still uninstalled.
And I won't be happy with something like "don't worry, if your system is working, just ignore them". Because if that is the case, then for sure I can expect more things not taken care of, from Dell.