I receive the below message when I turn on the Acer Aspire One after seeing the Acer logo.
Pressing the "alt" key with the "F10" when logo appears does not do anything.
Intel UNDI, PXE-2.1 (build 082)
Copyright (C) 1997-2000 Intel Corp
For Atheros PCIE Ethernet Controller v1.0.0.13(2008/10/15)
Check cable connection..!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key
Flashing the bios. I have a Aspire 5810TZ. I boot it up and it just says 'acer' and won't go any further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
JM4151135.exe FLA... GPC_V135.bin readme.txt FLASH.BAT
What do I do? I have tried copying the files to a USB and powering on with Fn-Esc held down. After letting go of the power button and holding Fn-Esc a different screen appears after 30 seconds. I let go and have given it 30 minutes but it is not doing anything. I have read online from other people the power button should be blinking. Do I need to rename one of the files.
My acer aspire one AOD270 is not booting. After I press the power on, it stops on the initial display of the acer logo. Nothing else happens. The F2 key only makes it say "please wait" and forever.
I have tried to discharge capacitance and staff like that. I have tried several keys/hot keys to no avail including the F12 and altGr+F8 Is it the BIOS and what should I do or is it the RAM because I checked on my RAM and it is in the right place
I have a new E1-572G laptop. Long story short, I installed Win 7 on it, and after that, Ubuntu 14.10. I had issues with bootloader, but after fiddling around with legacy/UEFI booting, secure boot, and things like that, I almost successfully configured the laptop. When I selected the ubuntu uefi bootmgr in the bios, in secure boot mode, I rebooted the laptop for what I thought the last time, but then it did not go past the Acer logo. Only combination that works is ctrl+alt+delete. If I remove the hdd, then the acer logo flashes for half a second, and a black screen appears, with a static console cursor at the left upper corner.
I searched a lot in the topic, wanted to reset the bios, but there is no jumper for this, nor can I remove the bios battery. I wanted to reflash the bios, but I could not find proper instructions on this.
My Acer Aspire V3 laptop (with Windows 8) stopped working and I tried to reset it but it fails after around 50% operation. I tried both reset and refresh options both not working. I dont have a recovery disc. I created one in another laptop(Toshiba)running Windows 8. Now I want to boot from the recovery media but it is not doing it. I tried to press F2 key on the start to get the bios screen but it is not showing and showing the Automatic repair screen with Advanced options.
View 4 Replies View RelatedAcer E5-471..... When I attempt to start my laptop it goes to the Acer logo screen and will not boot Windows 8. Only black screen and mouse pointer appear. How can i fix it?
View 3 Replies View RelatedI am having dell inspiron 1545...was working fine until last week when problem with screen started.
Whenever I try to turn on my laptop, it shows me dell logo and then it goes black... booting process is still on..and if you see screen in bright light you can see the process..
Now initially i thought that i need to replace my screen but it is showing dell logo so i am pretty sure that screen works fine, now my laptop does have the problem of overheating. is that is a problem????
and my laptop screen attachment to main body is not perfect too.
I try to install OS from USB but my bios not showing USB boot in acer travelmate 4050.
View 2 Replies View RelatedI try to install OS from USB but my bios not showing USB boot in acer travelmate 4050.
View 2 Replies View RelatedI was using my aspire yesterday to unistal an comodo anti virus program, then it stopped working. So I restarted the computer. it turn on but stay on the Acer logo. i tried the reset (HOLD POWER BTTTON FOR 30 SEC ) . It turned on but it still stay on the welcome Acer logo. whats wrong?.
View 3 Replies View RelatedAcer Aspire 5632 stuck on acer logo...
View 4 Replies View RelatedI needed to use Windows resore. after restart, the acer logo dont show and laptop stay in black screen and HDD LED blink in aqual time slice. Then after a few minutes acer logo shown and Windows starts.
This, happend few times but now acer logo dont show and it stay in black screen .
I just bought an aspire switch 10 last week, but I already got into problems with it.You see, when I turn it on, the acer logo appears, but then the screen goes blank and black.When I tried pressing some buttons, there is a mans voice and tells what the button I pressed is. Then nothing happens. It's just like that to every button. I tried to turn it of by just having the battery empty. Cause the screens still blank.What do I do about it?
View 1 Replies View RelatedI recently brought a Aspire E5-411, in Thailand, with a Linpus Linux OS. I installed my prefered OS Win7 x64. I managed to locate and install the hardware drivers. The strange thing is there is no bluetooth device showing in device manager. Is it because
(a) there is no b/tooth adapter on this model,
(b) the adapter is faulty,
(c) I need to install a driver to activate, or
(d) other?
I have had to have a new hard drive installed as I got a error message saying old drive failing.
I also had a clean install of windows 7 as I was uncertain whether my discs I created would be ok.
I therefore have not got all of the freebies that were installed on the laptop as new. I now find that the dvd drive is not showing in my computer and nothing happens when I insert disc.
I have had to have a new hard drive installed as I got a error message saying old drive failing. I also had a clean install of windows 7 as I was uncertain whether my discs I created would be ok.
I therefore have not got all of the freebies that were installed on the laptop as new. I now find that the dvd drive is not showing in my computer and nothing happens when I insert disc.
This happened a couple of days ago and I did a system restore to the previous restore point. I have also not got the egis safe - how to get this back ....
My battery indicator seems to be showing incorrect readings. When I get to about 16% battery, it will drop to 5%. It will not even show the battery critical warning, it just goes to 5%.
I already tried reinstalling windows to factory, same issue. Also installed Linux to see if it was a specific problem with Windows, same issue.
I ran powercfg to see what was going on and see this for my battery;
Battery ID17266SANYOAP13B3KManufacturerSANYOSerial Number17266ChemistryLIONLong Term1Sealed0Design Capacity53400Last Full Charge55455
For some reason, it is showing a full charge of more than design capacity. Could this be why it incorrectly thinks it has more battery, and then quickly readjusts to 5%? I tried recalibrating (three times) the battery by completely draining and then completely charging and have the same problem
Also, I found that if I overcharge (leave it plugged in after fully-charged light comes on) then this problem disappears for that discharge cycle, but will return if I don't overcharge it for the next cycle. It seems to think it's fully charged too early when it's actually not!
Honestly, I'm hoping there is a way to fix this without having to replace the battery, since it's not removeable for this model so I would have to send it in for warranty replacement. This laptop is only about 6 months old.
My battery indicator seems to be showing incorrect readings. When I get to about 16% battery, it will drop to 5%. It will not even show the battery critical warning, it just goes to 5%.
I already tried reinstalling windows to factory, same issue. Also installed Linux to see if it was a specific problem with Windows, same issue.
I ran powercfg to see what was going on and see this for my battery:
Battery ID17266SANYOAP13B3KManufacturerSANYOSerial Number17266ChemistryLIONLong Term1Sealed0Design Capacity53400Last Full Charge55455
For some reason, it is showing a full charge of more than design capacity. Could this be why it incorrectly thinks it has more battery, and then quickly readjusts to 5%? I tried recalibrating (three times) the battery by completely draining and then completely charging and have the same problem
Also, I found that if I overcharge (leave it plugged in after fully-charged light comes on) then this problem disappears for that discharge cycle, but will return if I don't overcharge it for the next cycle. It seems to think it's fully charged too early when it's actually not!
Honestly, I'm hoping there is a way to fix this without having to replace the battery, since it's not removable for this model so I would have to send it in for warranty replacement. This laptop is only about 6 months old.
no spekaer or headphone plugged in .. show x icon at my speaker there..
View 1 Replies View RelatedMy "open Box" aspire 8920 (Vista) wont startup.. but the Acer Arcade Deluxe will (without starting Windows)
When I exit Acer Arcade Deluxe, the screen shows a logo like XP but says only "Microsoft Windows Hibernating"
My Vista Logo has a round background where XP does not!
I just bought a new Acer E5 571 with Windows 8.1 The laptop paired to my bluetooth speaker quickly and with no problem.
However the next time I turned on my laptop it showed as bluetooth device paired when it wasn't. iTunes only played through the laptop speaker and I have to disconnect and re-pair the bluetooth and deactivate the laptop speaker to get iTunes to play through bluetooth every time.
Is this a recognised fault or some incompatibility between my laptop and LG bluetooth soundbar?
My acer ASPIRE 5733z laptop is not showing DVD Drive in My Computer. I have tried with registry key settings, but no positive result. Even the Drive is not showing in Device Manager! I have windows 7 64 bit OS.
View 7 Replies View RelatedI received my new Inspiron Utrabook today . Everything was fine for the first time that I booted. When I tried booting the second time, it's stuck on the Dell screen. Tried hitting F2 as per the suggested posts but to no avail. And how do you remove the battery ?
View 1 Replies View RelatedI have a 14z that I purchased last August with Windows 7. It freezes at the DELL logo, and I cannot even do a F2 or F12 to try and get to any of the advanced menus.
View 5 Replies View RelatedI have a HP G26 notebook pc, it has windows 7 on it and when I turn it on it only get to the windows start up screen with the little flashing logo and won't boot any further.. I have tried system repair, my back up disks.....
View 6 Replies View RelatedBeen working on my laptop all weekend and took an hour break came back and when the laptop tried to boot up got stuck on the dell screen. The screen it is stuck on has the dell emblem in the middle and has inspiron under that and a progress bar that is completely empty. In the bottom left corner is has F2 Setup and below that has F12 Boot Options.
I have tried to turn it on and press F2 all that happens is the F2 becomes highlighted but nothing seems to happen. I can do the same for the F12. I have tried booting it while plugged into wall and when it's not doesn't seem to change anything. I have left it on for a while now and every few minutes the screen goes blank and makes a few clicking noises and a few of the lights on the top corner of bottom part of laptop flash. It then just gets stuck in the same frozen screen.
The laptop has a weeks worth of very important data I need on it....
Yesterday i have received my new Laptop Inspiron N3542 with Ubuntu. I have installed Windows 7 Ultimate 64 bit and on OS installation completes, laptop reboots continiously on DELL logo.
Troubleshooting:
1. Performed a diagnostic test from BIOS under F12 - Passed all hardware test and no failure.
2. Tried with Windows home basic and Windows Professional 64 bit no luck.
3. In BIOS only option available is AHCI.
Dell XPS 12 Laptop.
Symptoms: Unable to load windows 8, unable to load windows repair, Unable to load windows 8 installer DVD, unable to boot into Linux, Unable to load Linux live CDs or USB sticks, unable to even use an MSdos boot USB.
Problem just appeared one day, one month out of my 1 year warranty so I began troubleshooting myself. After replacing the SSD, Motherboard, and unplugging every single cable, even disassembling the display and disconnecting the Windows button, Webcam, and touchscreen cables. Still I Could not get any OS to boot. On a whim I powered on the laptop them promptly disconnected the daughter board and sure enough my OS booted right away. Upon further inspection I learned that the Auto-rotate or rotate lock button had become stuck/damaged due to a fall or hard bump. I ripped off the button and ordered a new daughter board online and all is well now.
I have a Acer E1 522-3657 computer, which my son set-up for me but did not make the recovery disc(s). The unit is just outside of the warranty period when the hard drive failed. The hard drive just makes a clicking noise and after the logo screen appears it goes to a blue screen with a box that has the following message with in, "Default Boot Device Missing or Boot Failed. Insert recovery Media and Hit any key.....Then Select 'Boot Manager' to choose a new Boot Device or to Boot Recovery Media.
I have installed a brand-new Western Digital 1T Sata3 harddrive to replace the Toshia 750 GB original Drive. After turning the computer on and at the logo screen I press and hold F2, this takes me to the InsydeH20 Setup Utility Screen. I see under the "Information" menu that the installed harddrive model and serial number appear. I see in the "Boot" menu, Boot Mode: "UEFI" and Secure Boot: "Enabled".
Under the "Exit" menu, Exit Saving Changes is highlighted. When I press F10 a "setup Configuration" box appears asking to save configuration changes and exit now? "Yes" is highlighted to which I hit Enter and are returned to the "Default Boot Device.......page. I then hit ecs twice and are at a black screen with the message No bootable device -- Please Restart system_appearing in the upper left corner of the screen. I then push and hold the power button until the computer shuts off.
I have ordered from acer the "Acer E-recovery Media Disc Set", which is specific to the SNID of my computer. I have not attempted to format the new hard drive in any way. I assume the E-recovery Media Disc Set will handle that operation due to the multiple partitions required.
In view of the above situation, do I need to set up the computer in any way before I start to utilize the E-recovery Media Disc set. I assume the Media will be on CD's. The computer was running Win 8.0 which was updated to Win 8.1 and was running very well, very stable.
Acer V5, spilled coffee on keyboard. no problem at first, then lockup, and on restart get the No Boot Device or Boot Failed. Am using my old laptop now. Can I get a download, save it to thumb drive, and use it to restart/reboot my Acer?
View 2 Replies View Related