My "open Box" aspire 8920 (Vista) wont startup.. but the Acer Arcade Deluxe will (without starting Windows)
When I exit Acer Arcade Deluxe, the screen shows a logo like XP but says only "Microsoft Windows Hibernating"
My Vista Logo has a round background where XP does not!
I have an Acer Aspire 5710Z which originally had Vista but I had it reformatted to XP.
We've been using it for a little less than a year without much problems until about a couple of months ago when it started to freeze at random times at the windows logo (the one with the blue thing scrolling below). So we had to turn it off then on again and then choose the option to start on safe mode, which worked.
So I've tried lots of things to find out the source of the problem. Apparently, it's not a virus. We've tried to disable all the stuff at the startup but it didn't help. I've been looking around forums and stuff but none has given an answer to my problem.
So I brought it to these tech guys from school, who thought that the problem might be with the drivers. One of the guys saw that there were two intel graphics cards (Intel 945 GM driver) showing up in the device manager, like it was installed twice or something. He thought that might be the problem so he uninstalled the driver and the freezing stopped. I tried downloading newer drivers (actually, I'm not sure if they were newer, I think they were the same as the old one) for the graphics and each time I installed, the freezing problem came back. So the last few months, I've been using the laptop without the graphics card.
I was using my aspire yesterday to unistal an comodo anti virus program, then it stopped working. So I restarted the computer. it turn on but stay on the Acer logo. i tried the reset (HOLD POWER BTTTON FOR 30 SEC ) . It turned on but it still stay on the welcome Acer logo. whats wrong?.
View 3 Replies View RelatedI receive the below message when I turn on the Acer Aspire One after seeing the Acer logo.
Pressing the "alt" key with the "F10" when logo appears does not do anything.
Intel UNDI, PXE-2.1 (build 082)
Copyright (C) 1997-2000 Intel Corp
For Atheros PCIE Ethernet Controller v1.0.0.13(2008/10/15)
Check cable connection..!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key
Acer Aspire 5632 stuck on acer logo...
View 4 Replies View RelatedMy acer aspire one AOD270 is not booting. After I press the power on, it stops on the initial display of the acer logo. Nothing else happens. The F2 key only makes it say "please wait" and forever.
I have tried to discharge capacitance and staff like that. I have tried several keys/hot keys to no avail including the F12 and altGr+F8 Is it the BIOS and what should I do or is it the RAM because I checked on my RAM and it is in the right place
I have a new E1-572G laptop. Long story short, I installed Win 7 on it, and after that, Ubuntu 14.10. I had issues with bootloader, but after fiddling around with legacy/UEFI booting, secure boot, and things like that, I almost successfully configured the laptop. When I selected the ubuntu uefi bootmgr in the bios, in secure boot mode, I rebooted the laptop for what I thought the last time, but then it did not go past the Acer logo. Only combination that works is ctrl+alt+delete. If I remove the hdd, then the acer logo flashes for half a second, and a black screen appears, with a static console cursor at the left upper corner.
I searched a lot in the topic, wanted to reset the bios, but there is no jumper for this, nor can I remove the bios battery. I wanted to reflash the bios, but I could not find proper instructions on this.
I needed to use Windows resore. after restart, the acer logo dont show and laptop stay in black screen and HDD LED blink in aqual time slice. Then after a few minutes acer logo shown and Windows starts.
This, happend few times but now acer logo dont show and it stay in black screen .
Flashing the bios. I have a Aspire 5810TZ. I boot it up and it just says 'acer' and won't go any further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
JM4151135.exe FLA... GPC_V135.bin readme.txt FLASH.BAT
What do I do? I have tried copying the files to a USB and powering on with Fn-Esc held down. After letting go of the power button and holding Fn-Esc a different screen appears after 30 seconds. I let go and have given it 30 minutes but it is not doing anything. I have read online from other people the power button should be blinking. Do I need to rename one of the files.
I just bought an aspire switch 10 last week, but I already got into problems with it.You see, when I turn it on, the acer logo appears, but then the screen goes blank and black.When I tried pressing some buttons, there is a mans voice and tells what the button I pressed is. Then nothing happens. It's just like that to every button. I tried to turn it of by just having the battery empty. Cause the screens still blank.What do I do about it?
View 1 Replies View RelatedAcer E5-471..... When I attempt to start my laptop it goes to the Acer logo screen and will not boot Windows 8. Only black screen and mouse pointer appear. How can i fix it?
View 3 Replies View Relatedwhere to find these? i'm using HDX16 now i'm lost these after upgrading to windows 7
View 7 Replies View RelatedThe hard drive on my Aspire 5745 was replaced (same size 640 GB) when I install Windows, it hangs on the Windows logo as its swirling and about to start. I have checked in the BIOS to disable UEFI boot but unable to see this option.
View 1 Replies View Relatedif the Dell logo on the Studio XPS 16 lid is the same size as the XPS M series logos? The logo on my Studio XPS started to peel and a part of the 'E' actually broke off in the 4th day of ownership... I spoke to Dell and they want to replace the entire screen (!!) but I'm not sure if I want to deal with the hassle. I can get a relacement logo for the XPS M series but I'm not sure if it's the same size.
View 10 Replies View RelatedMy 1555 was bought back in August last year with Vista pre-installed and free Windows 7 upgrade. Everything went really well with the upgrade except now the Vista sticker is now starting to bugging me.
Can somebody describe to be what the new Windows 7 laptop sticker looks like? (Or even better if you could post a photo?) There are some available for sale on ebay quite cheaply but I'm not sure if they're genuine?
so who here has the a firepro logo in their catalyst control center rather than a radeon one? This makes no sense! Is it a common thing?
View 7 Replies View Relatedi was wiping my dell xps 1530 with a towel when the corner of the 'E' on the dell logo caught on the towel and ripped off part of the 'E'.
i superglued the ripped off part back on to the laptop, is there a way i can get another emblem from dell?
I've noticed that an awful lot of VAIO's have this sticker
View 5 Replies View RelatedI have received by new XPS 1645 on 2-Apr-2010
Yesterday while cleaning the laptop lid (thanks to its fingerprint magnet nature) the E and L letters of the DELL logo came off.
Please tell from where can i get the sticker replaced ??
The picture of the peeled logo is in the attachment
So i was cleaning my Studio XPS 16 and somehow the microfiber ripped the letter E on my outside Dell logo in chrome.
It ruined my damn day! So, can i get these letters anywhere?
on the palm pad, below the keyboard, tot he right of the touch pad, theres a picture that looks like thi
View 5 Replies View RelatedI bough Dell Vostro 1510 licensed. Recently i have formatted and Dell logo in the Systems Properties disappear.
Someone know how to show Dell logo in the Systems Properties?? please help..
Note: to go to systems properties by right click on My Computer > Properties
My Dell xps 13 is stuck on the dell logo screen, since its the logo screen i am not even able to go onto bios or boot option or anything, absolutely nothing has been working? is there anything i can do from here? or should i just send it to dell?
View 2 Replies View RelatedWhen I open the lid to the laptop and hit the power button, the 3 buttons on the top of the keyboard cycle through and the power comes on, but the only thing that happens next is the screen turns on with a slight brightness, but it doesn't load any further. It doesn't even load to the Dell logo. If I tap the power button again, all lights and monitor goes off with a beep noise.
I have taken the battery out, unplugged the power cord and held the power button for over 15 seconds. This did not do anything.
I received my new Inspiron Utrabook today . Everything was fine for the first time that I booted. When I tried booting the second time, it's stuck on the Dell screen. Tried hitting F2 as per the suggested posts but to no avail. And how do you remove the battery ?
View 1 Replies View RelatedI have a envy dv6 serial 2ce2502rs6 product b6b49av. It starts up with hp logo and goes to black screen. I tried repair before and it didn't work. I tried the hard restart and it came on and I selected repair and it didn't work again so I selected turn off and now it goes to black screen.
Once unit is powered on keep tapping the F2 key run the diagnostics test . It saysProcessor check passed. Memory quick check passed. Hard drive smart check passed. Hard drive short DST check FAILED.Failure ID OU7ATA-6B877E-QFPK1A-60U503Product iD b6b49avHard drive 1
I have a problem with my brand new Dell Inspiron 15R SE, that I bought yesterday.
In the evening I could use it with no problem, other than it unexpectedly disconnected from the wifi once, but otherwise it was OK.
This morning it didn't start at all, when I press power button the Dell logo appears, and it stays like that forever, nothing happens. The power and the Wifi LEDs are on, when the charger is connected, the LED is on too.
Tried to remove battery, but still no joy.
I just bought my Inspiron 14z Ultrabook three days ago. The first time works fine, but now it's frozen on the Dell logo screen.
I have been able to run a diagnostic test if I hit the f12, and it's all ok.
When I hit f8 and the bar is fully loaded nothing happens.
The normal LED on thinkpad lid is a red dot that appears on top of i. This dot does not light up. Am I missing some thing to make this i on the logo blink again.
View 2 Replies View RelatedMy Laptop is Lenovo G460, I have no problem with it till about a few days ago, my problem is every time I boot my laptop, I got blackscreen between Lenovo Logo --> windows logon, it's took about 2/3 minutes with cursor appeared at the very top left corner which is really make me mad . And every time I shutdown my laptop, I faced a long time shutdown, after my screen off, my keyboard and mouse still on...after about 5-10 seconds then it's all completly off.
I try to figured out what's happened with my laptop, then I change my boot option (F2)
I changed Sata Controller from AHCI to Sata Controller Compatible, and now every thing is works! no more black screen, and not only that, now lenovo logo is just faster, but the problem is still happen, when windows logo going to appeared I got blue screen error (BSOD) then the laptop was restarted by it self.
I try to redownloaded and reinstalled the drivers for my Windows 7 64 bit, here are the following that I redownloaded and reinstalled :
Chipset Driver
Intel Matrix storage
Intel Rapid Store
Intel Sata Controller
Turbo Boost