I have a VGA plug in my Dell Inspiron 1545 and when I plug in the cord it doesnt work. I have another laptop and I used the same cord and it works. So I guess my VGA doesnt work, what do I have to get to replace the VGA in my laptop?Â
Bought 5530 in August but already need to run recovery disks as the photo gallery constantly crashes and using restore to an earlier date does not work. I burnt two DVD's when I got it and they looked OK. However after changing start up in BIOS to dvd drive then restarting holding down f8, when pressing the complete restore tab nothing happens except a message saying no restore dvd or HD can be found. Cannot think what to try as the disks and dvd drive appear fine. I wish they included the disks with machine like sony do then you would be 100% sure it is not the disks at fault. Anyone else encounter this? I am sure the problem with the photo gallery is not a virus as I do not use the machine on the internet
just got my son the 1810TZ and reinstalled with Win7 64Bit Ultimate.
I now cannot get the wifi to work no matter what. Thoughts? Is it an Atheros? I have installed the atheros package as well as all other drivers that say wifi with no luck...keep getting network cable unplugged and in system properties it identifies a network controller to which there are no drivers installed...
I thought Win 7 would pick up all poss hardware for the most part. I never had this prob on my 1810T-6188.
I'm trying to get more grunt and more importantly more go/ less battery hammering (not at the same time..) out of an old TM240. So I bought a 2.8 P4 HT (SL7DS) which in theory should work in this board as it has the 852 chipset. However, when I fit it all I get is the wireless light comes on, and nothing more. Oh, and the light doesn't then go off when I press the power button again..
Works fine if I drop the Celeron back in though.
I can try sticking the P4 in a desktop I've got kicking around to make sure it works, but assuming it does, why doesn't it in the laptop? BIOS is the latest available and the board/ BIOS should be the same as the 250 series, which certainly came with P4 processors
i got a 5672awlmi (european)with xp(SP2 integrated)whitch i installed by myself(recovery partition deleted)..none of the 4 usb and the orbicam(logitech) works..i formatted several times but the problem remains...how can i get my usb working?
I have an Aspire 3050 that I need to restore to its original comdition. I created the recovery CD's when I got the laptop, however when I try and install I get read errors.
after instal windows 7,volume not work....but, button emploring,wifi,bluetooth include cinedash work well.... why? where i can download launch manager for windows 7? i try version 2.0.01/02 not work all..
This is absolutely crazy. The laptop came back to me in worse shape than it was sent off. C drive was wiped, several very large scratches that were not there before, and the CD drive simply does not work. I tried loading in a CD-R at first, and it didn't recognise it, though it might be the CD. Having the CD in at startup actually slowed down the whole boot sequence immsenely.
Since then I've tried it with several different CDs, DVDs, whatever and none of them work. The DVD drive just chugs a long and never gets anywhere.
I can't afford to send this back to be fixed now because 3 weeks was an insane time for me to be without a laptop. How costly/difficult would it be for me to replace the DVD drive myself?
A friend has an AS6920-6875 and Vista64. THey have a piece of software that they need ti use but isn't Vista64 compatible. One option is to use a Virtual PC like software and the other possible option is to install Vista 32 bit on this computer. Was wondering if the Acer supplied drivers on their support website are for both versions of Vista?
My laptop fell off a table whilst the disk tray was open and jammed the disk tray shut.
It didn't damage the laptop at all, just made a whirring noise every time I turned it on and off because there was a CD still in there (been like that for a few months). However, today the tray opened a little and so I pulled it right out. I know enough about computers to know that I haven't damaged anything else, just removed the tray.
Now my laptop won't turn on, and even the charging light doesn't come on. A piece of plastic ribbon/connector that was attached to the tray is loose - could it be that?
I have been trying to resolve this problem for the past 5 hours and am having no luck. I have an Acer Aspire 4710Z laptop and the touchpad left and right buttons will not work.
To select anything I have to tap the pad,I've tried to re-install drivers but to no avail.
Acer Aspire 2000. When a battery is inserted and the power cable is in, the charging light appears, I then switch on the laptop and it powers up within 5 seconds of it being on and trying to boot it will power down without notice.
If I remove the battery I can run the laptop fine off the mains. If I then connect the battery it will cause the laptop to power down.
I have tried two other batteries thinking it was a fault with the battery, but this is not the case.
I just wanted to know could it be a setting in the BIOS?
Under control panel: mouse properties tab hardware, there is no mouse shown. The same with device manager, there is no mouse listed. Changing mouse settings has no effect. There is still no mouse pointer, even though I can see it move when I hover over icons, I can click, and I can locate the pointer when I press ctrl (radar symbol). As soon as I plug in an external mouse, the mouse point appears, a mouse appears under mouse properties hardware, and I can move the pointer via touch pad also.
is i got a new Aspire E3-111 that has 2GB of ram, and i want to put one of my 4GB ram stick into my laptop but it doesnt work, the ram is the same type but it doesnt work. also the laptop freezes up when i play ME3 for more then 1 hour and i have to do a hard restart... i also made a video showing whats going on  [URL]
have bought a new Acer Aspire V5 573G without a system software. Now I want to install Windows 7 home premium 64bit on it but it doesn't work. First of all: Is it generally possible to do this? I tried to install it in the recovery mode but there was an error (something with the GPT Partition) so I switched the Mode to UEFI. I have read in other message boards that I have to switch to UEFI csm (compatibility support mode) but I can't find it.
my problem is that WiFi literally don't work - i can't connect to any network.I'm using Windows 8 Pro.It's a i5 + geforce gt 630M version.When i'm installing an Atheros Drivers, it says that device is disconnected and drivers cannot be installed.
Wi-Fi is totally turned off - I mean the led isn't lightning, blinking or nothing - it's dead.
I can't use Fn + F3, it don't work at all.
I've installed LaunchManager, Fast Lane, Touch Pad and Dritek Rf button.
Now, in Fn + F3 i can turn Airplane mode, nor Wi-Fi.Is there any solution to turn this on? It stopped to work from day to a day - yesterday it works, now it isn't.
Done some formats, it don't even work on Windows 7 with Acer drivers. Maybe card is dead?
I have the 4965AGN WLAN on my lappy and I'm getting speed of 144Mb/s on my wireless network. I have another computer with Edimax 7728n wireless pci card and with it i can get up to 300Mb/s. I want to try to upgrade my 4965 to a new 5300 mini pcie so maybe my speed will improve. I wonder if the 5300 will work on my lappy ?
I have very recently bought an Acer laptop, and tried to load my old Chamionship Manager 2001 game which i used often on my old laptop. Anyway, the game says that i don't have enough memory to run it on the laptop (definitely not true unless the laptop is lying about its memory)) but I did notice when it was laoding it said it needed DirectX and I should install a service pack (didn't get this with the laptop). Just been looking and it says Windows 7, which I have, has DirectX incorporated into it, is this true? Should I be downnloading DirectX to make my game work?
-Model(Device/CPU) -Operating system -Graphics Drivers -Browser -Results
My results:
1810T/su3500 Vista x86 1986 Firefox/IE Does not work
Update: It works now after applying these useful instructions:
Quote:
Firefox 3.5.5 users have to follow a separate set of instructions:
Before running a YouTube HD clip, please go to Firefox menus and select Tools/Clear Recent History. Ensure the Cookies checkbox is checked, and do the clear. Next, go to Tools/Options/Privacy and select “Never Remember History”.
The above procedure will ensure an HD clip is first loaded in SD mode with 640x horizontal resolution, and then you select the HD button and get GPU- accelerated playback at 1280x HD mode. If you do not first delete Cookies and then turn off history, you may enter an 854x SD horizontal resolution upon starting up an HD clip which is not GPU-accelerated today. If starting in 854x SD mode, when you switch to the HD version, it will still be non-GPU accelerated.
i updated bios in my acer travelmate 2000, it says to restart the system, after the boot it didnt show anything in the screen. there is a power but totally nothing on the srceen.
how i will going to restore it, and they said i need to make a bootable flash floopy drive.
I have upgraded my 5315 laptop to a T7300 cpu and iit s working fine. Is it possible to drop in a Q6600 quad cpu instead of the T7300 ? I have a extra cpu I would like to use.
If it will not work, is there a quad cpu that will work ? I am doing video editing and would like a powerhouse cpu.
I will have after Oct 22, two license copies of Windows 7. Will Windows 7 work better with the T7300 cpu ? Could my laptop be upgraded to 4 gbs if I run Windows 7 ?
My memory card reader was fine, however after reinstalling Vista Ultimate it won't work.
It shows up as "Texas Instruments PCIxx21 Integrated FlashMedia Controller" in Device Manager. However I've tried multiple SD cards and it just won't recognize that anything has been inserted. The computer doesn't pause or show any indication that it's doing something when I insert a memory card.
I have a Ferrari 4006WLMi with Windows Vista Ultimate.
I have tried uninstalling and reinstalling the drivers several times already. I have also upgraded to the latest BIOS
I need to use a 4GB SDHC card as RAM via Readyboost...
MY left shift key only work for certain keys but my right shift key doesn't work at all, i tried OSK and when i click the shift and press the key to shift its ok but when i press my right shift doesnt work  left shift key working keys
All of my headphones work on my other devices, so I know that the problem is not with the headphones themselves. The problem is that when I use my headphones with my laptop, everyone esle around me can hear what I'm listening to. What do I need to do?