i signed up at ieee.org as a student and got the win7 free download (after paying $15 for the annual membership).
NOW... i have the 1537 w.fingerprint scanner. wondering if there's any issues with any drivers out there for hardware i should be aware of.
who else has switched to Win7? worth it over vista? heard it is but i don't want to lose my saved info and fingerprint login ability.
I received my Precision M4400 with Win 7 Pro x64 pre-installed, and using it for audio recording and playing everything works great. However, since Win7x64 drivers do not exist for some of my audio devices,
I decided to put in a new HD (same as the original, only larger) double-booting XPx86 and Win7x64. So I installed XP on one partition of the new HD and Win7x64 from the CD that shipped with the M4400. Big problem...
Neither XPx86 nor the re-installed Win7x64 are able to deliver anything but crackles and pops and noise only slightly resembling music. Forget about recording...
will there ever be a new dell gaming xps laptop "not alien ware" like a m1830 with 9800m gtx sli and quad core processor? Also will the m1530 ever be updated to support better graphics like 9800m gts
View 10 Replies View RelatedThe disk i used to burn the Dell OS Recovery CD onto has been damaged and I can't burn a new one. Why is this? Is there a way around this or do I need to call Dell for a new recovery cd?
View 9 Replies View RelatedI seem to be the only one here with constant probs with my 6400 so after speaking to DELL today, im returning my laptop for a new one.
What I want to know is should I swap out my nVidia GPU for the Intel? I think thats whats causing my therma/fan issues and maybe overheating the system as well (being that I use two external monitors with a dock).
I just got a new XPS 1530 with Vista Home Premium 64 bit. I'm told, before I do anything, I should make a Recovery Disk. How do you do that?
I think the recovery disk is used in case everything crashes.
It's different from a Boot disk (which isn't needed anymore, since you can use the OS installation disk to start Vista if needed).
Also, I'm not talking about System Restore, which reloads your system from a time before your last SW install.
Studio, Studio XPS, Latitude, Precision - they all have DPC lag from threads I have read on here.
Should I just stay away from dell if I want to run cubase or audio software?
I ordered my 9400 with an ATI X1400 and now that I see from reading this forum that it is considered a pretty lame GPU I was wondering:
Since I don't play games on my laptop (except Civ4, which runs fine) should I even care that my GPU sucks. Is there anything other than gaming that the GPU does that would make me consider upgrading. I have a 2GHz CPU and 2 gigs of ram and I'm really quite impressed with my first laptop. I'm just one of those idiots who gets jealous when he notices that his "toy" has an inferior component in it.
Does wireless N really make that much of a difference to e G network?
Anyone tried changing the G card in a 1350 for an N? Anything to be aware of or avoid?
Are all 3 wires in the 1350 (sales person trying to sell me the N card claims they will be).
My dvd is a Mata DVD+-RW UJ-875S. i looked around and couldn't find rpc1 firmware to flash....
View 4 Replies View RelatedI purchased my M1210 in late December and got it configured so that I could switch to Vista if I wanted. I got MCE on it and I think the configs for Vista. Here's my dilemma: I don't whether to switch to Vista or not. I got the free upgrade CD that Dell sent me. I have read, though, some really bad reviews of Vista. Is that b/c some systems don't have the right configs? Should I switch? I'm heading off to college in less than a month. What should I do? The college recommends either Windows XP Prof. or Windows Vista Ultimate (oh yea, why ultimate? isn't that overdoing it? i thought at first it was but then the dell college website also recommends ultimate. why is that?). Would my system be ready for ultimate? The upgrade I got is for Home Premium. They recommend I get ultimate but, unless there's something I'm not seeing, I think Home Premium will suffice. But should I switch or stay with XP? If you do think I should switch, is there some guide online somewhere that can guide me through it (ie. which drivers to backup, etc.)
Here are my specs:Intel Core 2 Duo Processor T7200 (2GHz/667MHz/4MB), 2GB, DDR2, 667MHz 2 Dimm, 256MB NVIDIA GeForce Go 7400 TurboCache, 160GB 5400RPM SATA Hard Drive XPS 1210
One more thing (sorry for the long post): what do you think about securing my 1210? Should I use an actual lock or would software like LoJack be enough?
I have just got a new dell XPS 12, but no touch is enabled in it. I would like to know, is there any way to enable it, like hardware switch/ or from BIOS etc. Or I landed up with a defective device? What is the wayout to make touch work on XPS 12.
View 8 Replies View RelatedMy xps 1710 with 7950 gtx (4gb ram) (100gb hdd) cant cope with battlefield 2 bad company 2 as am getting as like average 15 fps. Got drivers from dell that were updated 2 years back.
BF2 BC2 is set on lowest resolution with all setting at LOW!
What can I do to make this game play on this good fast laptop please.
I ordered a "previously ordered new" Latitude E6400 from the Dell Outlet a few days ago. Got a pretty decent price of $560 after using a 15% off e-coupon.
Mine is fairly basic as far as the E6400 line-up goes, e.g. no fingerprint reader, no backlit keyboard, no Bluetooth, etc. I'd use this strictly as my personal laptop, and I was looking for something with XP and a matte screen anyway.
It has a Core 2 Duo P8400, 160 GB HD, 2 GB DDR2 RAM, 24x CD-RW/DVD drive, Intel GMA 4500 MHD video, WXGA matte screen, and the Dell 1397 802.11 b/g internal wireless card.
Hopefully I'm just overreacting, but I've come across some owner reviews on CNet, Amazon, Dell.com, etc. about E6400s having overheating problems, issues with Dell's ControlPoint (?)
software, the pseudo brushed metal exterior surfaces collecting fingerprints and skin oil way too easily,
This is not the newest topic but it's been well described that the Latitude E series' touchpad is crappy. With the launch of Windows 7, I thought that I'd give the new touchpad drivers a try. Still as crappy.
This is the worst touchpad and pointing stick that I can remember using on a laptop. Normally I wouldn't care, but actually having a terrible nav system really stinks more than I thought it would.
Well, my stop-gap solution was to simply remove the Dell touchpad drivers altogether and go native with whatever Windows 7 detected. What an amazing difference! The touchpad is usable now (it doesn't freeze and it tracks much better).....
memory compatibility.
My notebook requires (or originally came with) 2 x 256 MB 533 MHZ DDR2 SODIMM Memory Module, but now I want to upgrade to DDR2 2GB (2x1GB) PC2-5300 (667MHz). This memory seems to be cheaper than the memory that is required for my computer so that is why I'd rather purchase it. I know the notebook will not allow the memory to run at that speed, but I wanted to double check on its compatibility.
I know it probably will work (90% sure), but getting a second opinion before a purchase is always better than after.
I was on a friend's brand-new inspiron 1525 today. After I began using it, I immediately noticed just how awful the touchpad is.
It is extremely inprecise. It's almost as if the sensitivity is constantly changing as I use the touchpad. I don't remember if I tried adjusting the settings; if I did, it didn't help.
I soon discovered that if you move your finger in a perfectly straight horizontal motion across the touchpad (no vertical motion), the cursor, as it's moving across the screen, will also 'bounce" up and down, getting worse towards the right side of the tochpad.
It doesn't abruptly jump at all; rather, it's as if the linearity of the touchpad is WAY off.
why havent there ever been gpus when you could just plug it in and out, look like a small usb hd or something lol,thatd be sweet, no mother board bs or anything just plug and play, maybe someday? im sure there is alot of reason but i just though id ask, it would be rather neat.
View 15 Replies View RelatedI have a weird issue which I did not realize until my system was crashed.
I have Inspiron 1525 purchased in sep 2008. Order and original configuration is showing XP whereas recovery CD alongwith was Vista (my mistake was that I did not check the CD until now).
1.Now how should I reimage my laptop with XP?
2.Where to find the OS Key for XP? Will Vista key work for XP or is there anyway I install vista and upgrade to XP?
There is no mail id where I could forward the mail of purchase order and original config details.
Recently my laptop starts to make a high frequency whining noise, almost constantly and rarely stopped.
I tried to locate the component which the noise was originated from, I can only figure out it's somewhere below the memory module, but there is no moving component there, so my biggest suspect is the fan, because if I put my ear to the back of the laptop, except the whining I also heard very minor "clicking" noise.
Another weird thing is, this noise only starts after Windows is loaded, not in BIOS or during booting, although the fan was running at those times.
I recently picked up a used d630. It currently has two 512 dimms in it. Do I need 2gb or 4gb? I know Windows XP won't use all 4gb.
If I do upgrade to just 2gb. Should I use 2x1gb or just get 1x2b and leave the other 512 dimm in there for now??
I have three processor questions regarding the M1330:
1. Is it possible to upgrade from the Intel T5250 to the T8100?
2. Are Dell processors a proprietary size or shape?
3. Can I artic silver the processor to make it run cooler?
My laptop INSPIRON 17 (3721) has problems to start and makes 5 beeps. I saw in other forum that it is a matter of the coin battery. I have already changed it and it is still doing the same. It doesn't show video, there's no fan noise but the power led is on. After about 5 minutes the fan starts.
View 3 Replies View RelatedRecently having several issues, unable to make new folders, but now my fnc key that turns the sound off doesn't turn the sound off anymore.
View 7 Replies View RelatedThese are terrific little computers, with the brilliant LED screen, small size and light weight, DVD/CD recorder/player, 54mm slot for the Mogomouse,
slots for SD and Memory Stick, and a true five hour battery life. It is almost powerful enough to do mild graphics such as Google Sketchup, Irfanview, etc.
We have installed XP and removed everything unnecessary - hopefully without losing something important. Memory is max'd at 1.5GB. The processor is a U1500 single-core, at 1.33GHz
It is known that due to marketing strategies Sony decided to limit the maximum memory supported by Z690 (aka Z3) down to 6GB, despite the fact that there are reports about Z1, Z2 and Z4 installed 8GB successfully without a problem.
The working way is the stupid (and possibly risky) way:
1. Important: Clear all passwords in BIOS! (including main, user and HDD passwords) otherwise you may have to flash back to your current version to access BIOS settings.....
How do I run a program from an ISO, as opposed to having to put the disk into my Macbook Pro?
View 8 Replies View RelatedHow to make my touch-pad scroll function work? I drag my fingertip up or down the right side of the pad, on the line, and get nada, zip. If i hold down the left click key i can scroll with the window slide bar but thats it. I have checked all of the settings for mouse that I know about. .
View 1 Replies View Relatedi cant make the monitor to work in his native resolution 2560x1600.The best i can get is 1920x1200 with hdmi cable.i have try with hdmi to dvi cable and it give me 1920x1080
- hdmi to hdmi cable 1920x1200
- hdmi to displayport cable - no image at all
When I go into the Control Panel and try to make system image backup on external hard drive get message saying backup failure. Have tried several times. External backup works fine for other things. How to do this?
View 3 Replies View Related