E6400 comes with 10/100/1000 ethernet card. However if you connect the laptop to 10/100 router,..
it will always connect at 10Mbps. I have other laptops with 10/100 ethernet card and it can connect at full speed 100Mbps. Why E6400 chose to connect at 10Mbps?.
I have checked the setting is Auto-Negotiate:
- E6400 connects at 10Mbps
- other laptop connects at 100Mbps
All this SATA talk is stalling my purchasing plans.
View 8 Replies View RelatedI had to format the wife's old Dell Inspiron 5100 and reinstall XP. I did not have the install CD that has all the drivers so I went to the dell website and downloaded all that I needed.
I got everything installed but the hardware manager says I have an "ethernet controller" that does not have a driver. It has a Broadcom network card in it and it says the driver is loaded properly and that the device is functioning correctly .....
So I just got my Studio XPS 1340. Everything is good. Just installed Windows 7(clean install). But, there is a problem with the ethernet when the system resumes from sleep/standby.
I didn't test ethernet with vista. There seems to be no problems with Wifi resuming from sleep. Is this just a Windows 7 driver problem? I updated the bios, drivers, basically everything I can find I updated.
Still happening.
Also turned off "Turn this device off to save power" option.
Any ideas?
Dell Studio XPS 1340
P8700
4GB, 210m SLI, 320GB WD H
XP has the controller flag in device manager (red) When I try to install the drivers I get setup.rul 380 error..is it a bad card?
View 3 Replies View RelatedI have a new XPS 1530 & was trying to find the specs on the components & couldn't find any. Could someone tell me the specs, or where I can find them on my computer? I'd like to find the following:
Ethernet -- 10/100 OR 10/100/1000
Firewire (1394) -- 400 or 800
Also, for the wireless card for Intel WiFi 4965AGN 1) is it dual band, 2) what speed (Mbps)?
Has anyone been able to get their Ethernet Controller to work on the Studio 17? I have the wireless working, but the Ethernet Controller will not load any drivers, automatic or manual. I have searched Intel's site and downloaded every 64 bit driver from Dell's Studio 17 download page.
View 10 Replies View RelatedI haven't been able to connect to LAN (Ethernet) connections since I acquired this laptop, I have installed the correct drivers and tried with different OS but none of them have been a success.
I tried in different Ethernet connections (different houses too) but I still get no internet on my laptop, it recognizes that there's something connected but no internet at all. Since then I have been using a Wireless Router always...
If I leave my M4400 idle with Windows (Vista Ultimate 32-bit) locked and the screensaver on for any length of time (e.g. 20 minutes), then the network card goes into power-saving mode even while on AC power, reducing the connection speed from 1Gbps to 100Mbps. I can see this because the colour of the LED on the port changes. The reduction in speed causes a brief disconnection from the network. When I unlock Windows, there is another brief disconnection as it reverts to 1Gbps, and this causes instant messaging applications to log out.
If I go to the Link Speed tab on the network card's properties in Device Manager and force it to 1Gbps instead of Auto Negotiation, it warns me that power-saving features will be disabled, but then I don't experience the problem and it never disconnects. "Reduce link speed during battery operation" is unticked, but this should not apply to AC power anyway. I've tried upgrading the driver to 9.50.14.2, A01 (released on 24/02/2009) but the problem still happens.
Does anyone else experience this?
I've just reinstalled my OS because my computer was being really slow. anyways, i've installed the ethernet and wireless card drives,
but i can't access the internet wirelessly. when, i plug in the ethernet cable, it works, but when i use wireless, it just connects to my router,
but says it cant access the internet. i remember fixing it by calling comcast, but it took quite awhile ....
I have Dell Insipiron 15 R N5010 laptop and I cant connect to cable internet. I was getting error 651 which I fixed after changing my raspppoe.sys file but after that I am getting error 797.
Error 797: The connection failed because the modem or other connecting device failed. Please make sure that the modem or other connecting device is installed.
I tried checking the Modem under Network Adaptors and found there is a yellow mark next to "WAN miniport pppoe"
I tried updating the drivers but its not accepting and gave me error:
"Windows has found the drivers for your device but unable to update, could not found the specified file"
I have tried udisabling and re-enabling wan miniport but no luck....Tried un-installing it and check all other settings in Internet options but no luck. How to restore it to factory settings if that is my last resort ?
I am unable to find the ethernet driver for the Vostro 1000 laptop. I found the wireless drivers and all other drivers for the computer.
View 1 Replies View RelatedI have a Dell Inspiron N4110, which I recently installed a new windows on. I can't seem to connect to the internet. Before the new installation the WIFI worked fine, but now even connecting through ethernet doesn't work. I looked through my Network drivers and there are only two.
I've tried download and installing others but no hope.
I want to stop using my wireless connection on my laptop and plug an ethernet lead in.
But when I plug this lead in my laptop just stays connected to to my wireless network. I tried disabling the Wireless on my computer then putting the lead in but still it wont attempt to connect to the internet with the ethernet lead in. What driver do I need to download so it will recognize the lead is in the laptop and attempt to connect to the internet?
I have an ACER 5610/Z
My laptop doesn't detect my ethernet card, so when I plug a cable in, only the yellow light at the top left of the port flashes, whereas the green light at the top right of the port does not light up. I get no signal at all. In Network Connections it shows that I only have a Wireless Connection and not LAN. Device Manager shows 3 Unknown Devices, however when I downloaded my Atheros driver from Acer's website the driver said that my hardware could not be found.
View 7 Replies View RelatedI've just installed a new XP Sys (SP3) on my Acer Ferrari 4005 but dont know where to put the Broadcom LAN Ethernet drivers
There is no installer or setup.exe just 3 files in the folder which are:
b57win32......21kb....Security Catalogue
b57win32......104kb...Setup Info
b57win32......124kb...System file
On my brand new Sony SR590, I cannot get the ethernet connection to run at 10/100/1000, only at 10/100. I don't see any settings for this whatsoever and I think I've looked everywhere. I have the Yukon 88e8040 card. When I bought the computer, the site says it's a GbE card! But why isn't it running at such speed?
View 8 Replies View RelatedI got a Dv9500 although the lid says its a Pavillion DV9000 and I am dying for the ethernet driver and the OHCI Compliant IEEE 1395 host controller drivers.
View 3 Replies View RelatedI recently did a clean install from Vista 64 to Windows 7 64... I was upgrading my drivers today but came across a problem... When I install the newest driver (here) for my Realtek Family PCI-E Fast Ethernet NIC port, my download speed (from speedtest.net) drops from 20-25,000 Mbs to 5,000 Mbs
The newest driver is 7.4.713.2009... The one which installed when I loaded up the HP / Windows 7 discs was version 7.2.1127.2008, so when I saw my speed drop so much I rolled back to this driver... So what am I missing here? Why is the newer driver causing the speed to drop so much?
i have a HP 255 G2 Notebook PC that i bought last year. The pc came with windows 8 installed so when i tried to install windows 7 64 bit i noticed the hard drive was GPG encrypted so i had to open the laptop and take out the hdd to reformat it with another computer. That went well. I installed windows 7 but i noticed the ony driver that wont work is the Network Controller driver. I have internet in the computer through a flash usb but now i need to use my wireless internet instead. So i downloaded every driver from my laptop but it wont work so i wonder if the network card is broken. In every network card i've seen on laptops there are to cables connecting the card to the motherboard. One white cable and on black cable but this laptop has only a black cable.
Laptop Model: HP 255 G2 Notebook PC
Network controller IDs:
I recently reformatted and installed xp on my Aspire 5680-6123, and finding drivers is tough. Ive got most of the things working, except for the Ethernet adapter. The drivers ive tried are the broadcom ones from the acer site, but nothing seems to work. The default drivers xp wants to install do not work either.
Maybe im just doing something wrong, installing the drivers incorrectly.
More than 4 weeks I've been looking for Ethernet controller card in the laptop HP-530 for the Windows Vista Home 64-bit not this for the 32 bit, this does not work ....
View 2 Replies View RelatedI have an HP pro 3500 series Macrotower , and i have problem and i cant find how to install ethernet driver.
View 3 Replies View RelatedJust reformatted my R51 with Windows XP again and I cannot get it to recognize the Ethernet Drivers.
I got the 2 possible drivers from the IBM website and not one of them says it's correct.
What am I doing wrong?
The Network Card was working OK before formatting, as I was on the internet with it.
Apparently its a common problem on the SXPS 13 where the Ethernet adapter fails to work after the system resumes from sleep. It is caused by the NVIDIA chipset driver.
Can you check if yours is working correctly after the system resumes from Standby or sleep? If so, can you post what OS you are using? Which driver(Win 7 or Dell one)?
im asking this because i see many other 13inch notebooks supporting it but on the sony vaio sr website it only lists 10base t and 100base tx not 1000base...
View 3 Replies View Relatedlink to download the drivers of the ethernet of this computer i only got 2 days to get it ive been looking for hours whats the drivers name but couldnt get it
View 4 Replies View Relatedi have just purchased for a gift HP 15-g018sv.
The laptop has windows 8 pre installed.
The laptop cant work propriate with Windows 8, so i tried to downgrade it with Windows 7.
The problem is that there are no drivers nowhere for Windows 7 for the ethernet and network cards, so i cant install updates.
I could not found ethernet controller drivers for my hp 15-d017tu
Here are its hardware IDs:
PCIVEN_10EC&DEV_8136&SUBSYS_218F103C&REV_07PCIVEN_10EC&DEV_8136&SUBSYS_
218F103CPCIVEN_10EC&DEV_8136&CC_020000PCIVEN_10EC&DEV_8136&CC_0200
send the ethernet driver for HP pavilion 15-e006tu for windows 7 32 bit
View 7 Replies View Related