I just bought a new 64 bit Studio XPS and it will not recognize any of my SDHC cards using the built in card reader, or Western Digital 250gb USB passport.
It will recognize my USB Thumbdrives (8gb)
I rely heavily on SDHC cards.
Each time i plug one in, it asks me to format, but it won't actually format.
I have a Dell Inspiron 1520 with an Nvidia 8600gt. I have a dell 2409 24 inch 1920 x 1080 monitor and a Samsung 22inch 1680x1050 LCD TV. I use one or the other depending what room I'm in. Both are connected using VGA cables.
These have always worked perfectly, today when I tried plugging into either one they are detected as 'generic non pnp monitor' and I get a choice of standard resolutions up to 1600 x 1200. These always used to run at their native resolutions and were detected as Samsung and Dell.
I have reinstalled the display drivers, power cycled everything, gpu seems to be running fine according to gpu-z.
I have reverted to a working backup but that made no difference. Im using windows 7 64bit.
I'm trying to use a 8GB SDHC card on my M1530, the card is "detected" after a little while of being connected. It won't read the size nor the format but it'll say that it does need formatting. I can connect the card to my Toshiba laptop and it'll read just fine and even format properly.
I'm using Vista Ultimate / Windows 7 RC1 (doesn't work on both). I tried to download the XP hotfix but that won't install.
I can't run my 8GB SDHC card on the built-in card reader on my M4400.
Current OS is windows xp x64.
Is there an update for this issue?
One more thing is where to buy a new motherboard for the same
but the one include the nVIDIA 1700M?
I'm looking to upgrade mine, is it expensive?
http://support.microsoft.com/kb/949126
View 4 Replies View RelatedWhen i connect vga cable to external monitor or TV, iam unable to project in 2nd display, tried with multiple cables, tired projector,tv,monitor - still no go....
OS re-installed, updated bios,chipset,
I have a new Dell 10 Netbook and purchased a Sandisc 16 GB Card for netbooks. The card does not enter fully into the memory expansion slot. My computer does recognize it and opens, but the card sticks out of the computer. I thought the card should be invisible, my experience in using cards for other devices. Is this norma.? I don't want to force the card.
View 6 Replies View RelatedI rely heavily on SDHC cards and use the built in card reader heavily in my Studio 1537.
I just bought a new Studio XPS 16 and it won't read my SDHC cards. I chatted with Dell last night and they took control of my system remotely.. They couldn't fix it, and finally said "The Studio XPS 16 does not support SDHC, you'll have to use regular SD"
I just find this hard to believe on a new, so called "State of the art system"
I also have a Studio 15 (1537) and SDHC works perfectly.
After fighting with several "Techs" and their "Supervisors" I returned the system and bought another..... AND, what do you know... I was right....It does support SDHC!!
From what I've read, it *should* work, but the computer does not recognize a 32GB SDHC card that reads fine on other computers and my PDA.
I've installed the latest driver available from Dell and the XP hotfix, restarted the computer, but whenever I try, I get a "device cannot start" error in the device manager.
A regular 2GB SD card reads fine.
I was wondering how far out an installed SD/SDHC card sticks out of the slot on the Mini 9? It seems a common thing for people to buy a big, fast card and leave it in there for permanent additional storage. I've got one on order thanks to all the fun with the Dell Outlet this week (missed the 15% off deal but managed to score a 512/16GB with no OS (have spare XP Pro, Vista, and Ubuntu I'm going to try) for only $329).
I ordered a 2GB stick of G.Skill 4-4-4-12 from Newegg but haven't yet picked up an SD card - I had one in my fiancée's e1505 but in her taking it places it apparently got knocked out, but since that was just for ReadyBoost, no big deal. However if I have an 8GB+ SDHC card in my Mini 9 I don't want it disappearing for obvious reasons.
xps 1730 ok with sd, but sdhc cl10 doesn't upload, had to connect with usb to camera.
View 3 Replies View Relatedi want to hear microphone thorough speaker, i using hp pavilion dv4 notebook MICROPHONE( panasonic karaoke dynamic microphone). i had tried all possible setting like recording,sound etc. , but same microphone is working on pavillion dv6 ntbook.........
View 6 Replies View RelatedI just got my new SR420 and I did a clean install however my buttons for the mode and settings etc at the top (external) aren't working. Anyone know which drivers or programs control that function,
View 10 Replies View RelatedInspiron 1300, been plugging an external monitor in & using function F8 for years but it just failed. The monitor isn't recieving the signal anymore. Tried another monitor as well. My laptop screen is lit up as always, and I can see some movement when I cntrl alt delete, but I can't read anything to see what's wrong.Is it my video card? Is that the thing I plug my VGA cord for the monitor into?
View 1 Replies View RelatedI need some help:
1) I want to know if anybody is using an SDHC card as a readyboost drive
2) What are the maximum SDHC specs that can be utilized by the computer (both size and class), i.e., what is the maximum size and speed supported by the reader.
If am thinking of buying this card for readyboost (I plan to have it always in the slot): ...
It would be easiest if I just had a camera to take a picture of it, but, alas, I do not.
I have an Acer 22" monitor that I attach via mini display --> VGA to my 13" MBP, but for some reason it isn't aligning correctly. The external monitor is set up to the right of the laptop. The native resolution of the monitor is 1680x1050, which is displaying correctly, but the entire image isn't showing up on the screen. I moved the horizontal position all the way to the 100 mark, but there is just a 1.5-2" black line going down the right side of the monitor. Also, normally if you drag an app between the laptop monitor and the external monitor it is "seamless," but right now you have to drag a little further until it shifts onto the next monitor... if that makes sense. Essentially, the whole image on the external monitor is shifted to the left about 1.5-2". The monitor seems to be fine... when I make the resolution lower, the image fills the entire screen (it's just all out of proportion and hurts my eyes).
I have tried reconnecting all the connections and resetting all the settings, but nothing is working. It's still workable right now, but it's annoying as heck.
HP G56-122US running Win 7. Bought a replacement 320 GB hard drive due being told by a repair shop that the hard drive had crashed and could not be recovered. Turned out to be the CPU, so I bought a hard drive enclosure so that I could use the new replacement hard drive as an external hard drive. Connected it to the computer and got messages that the software had installed and it was ready for use. Now, if I go to "control panel", click on "devices", it shows that it is installed and operating normally. However, if I try to use it by clicking on an item such as music, document, or a video, and click on "send to", it does not show up as one of the choices. Info that came with the enclosure says it is compatible with Win 7.
View 6 Replies View RelatedI have hp g61 for a while, i have been maintaining really good till recent my screen went BLACK.. it was acting funny before as it stays ON after i turn of the laptop... and now it is all back  cant see nothing ... the laptop works fine when i connect to external monitor.. Â
View 1 Replies View Relatedif i can get my Card reader built in to the ACER 5630 to read SDHC cards? surely it could be sorted with a driver update? real pain in the ass if no work around
View 5 Replies View RelatedThe touchpad of my Inspiron N4050 stops working properly everytime i plug my external HD that is AC powered or the HDMI cable. It doesn't matter if the AC of the laptop is connected or not, the touchpad becomes impossible to use. I tried using it in other places thinking of an energy problem at my place, but it still occurs. Other laptops work normaly with the external harddrive and the HDMI.
View 5 Replies View RelatedI use the Displaylink dock to connect to an external monitor, but it has suddenly stopped working. The error message said "check connections". I have done so - replaced the digital video cable between dock and monitor with a new one, cycled both dock and monitor on and off several times, but windows can not find an external display.
The Lenovo settings app has been giving me an "updating... " message for 3 days (I have raised a query on that elsewhere) so I can't use that to check out the display problem. I should say the display problem started today, and the "updating.."
Thinking of buying a 4GB SDHC card for my camera.
Does anyone know if this can be read by the SD reader on my Sony FZ31S? Its about 8 months old
High capacity SD cards of 4 GB or 8 GB (or even higher) has been in the market for some time. Can Sony Vaio TT read these high capacity cards without an adapter?
View 10 Replies View Relatedhow to make the 4GB SD Card works? I tried the sd card on my other computer and has no problem. I searched the Internet, it seems that the vaio has a limitation up to 2GB only.
View 3 Replies View RelatedI just upgraded from Vista and the Blu-ray drive won't work. I installed the device driver and it appears in the system manager. Is there some other software that needs to be downloaded? If so, where do I get it from?
View 3 Replies View RelatedI am getting the above msg when trying to use the built-in Web cam for Video or for “picture capture”, i.e. photos.
I removed everything with the Dell camera and reinstalled the “Creative Labs Dell Webcam Manager , 140 mb”. No joy
I also installed from the Dell site "input device drivers"- "Creative labs driver, R2RC1, A04", no joy.
Webcam works fine with Messenger therefor I am cautious to “reinstall/remove, disable” or so the Webcam Device in Device Manager since I don’t want to ruin it further
I did a bit of searching and noticed others found solutions mainly by reinstalling drivers though this has not worked for me. Would someone have any other tips?
Here some PC details: Dell Inspiron 1525, Vista Home Premium, SP1, 2GB RAM, one reimage done around 4 months ago, not sure if it happened because of that)
I have a T420 that I'm using with a Mini Dock Series 3 - 90W 433710U docking station. I'm trying to connect to two external monitors (both HP 1965's) using the DVI and VGA outputs on the docking station. From the VGA output, I'm running a VGA (M) to DVI (M) into my monitor. I can only get either the DVI or VGA outputted monitors to work by themselves, but not together. When I connect both external displays, it will switch off one of the external monitors (the first one connected).    Both are verified working as external monitors with the T420, just not at the same time. When using the DVI output, I can get dual monitors to work using the ThinkPad display as one monitor and the DVI-connected external monitor as the second. Is there a way to connect to two external monitors from a T420 with a Mini Dock Series 3 - 90W 433710U docking station? Or do you a multi-monitor adapater, such as an Cirago HDX3DV01 to do that?
View 8 Replies View RelatedI have X1 Carbon Type 3443. Is there a way to use scandisk micro SDHC card? In past (other laptops), I was able to use USB to read them.Â
View 1 Replies View Relatedmy acronis stopped working, itunes locked it up, and several other programs were just not working the way they should. i went out and bought a new hard drive, installed, and put xp pro back on! i'm in heaven again! i couldnt beleive how much i used to enjoy xp until i got it on. no more lock ups, programs work,
View 15 Replies View RelatedI have installed a V-lited version of vista onto my acer aspire one, but cant get the Lan to work or the Wlan, the Wlan doesnt even show up in the device manager and i cant find drivers for it as i dont know wat module it is.
Does anyone know which wireless card it is or were i can find drivers for the wlan?
Also i cant find a driver for the ethernet controller.