I read the clean install without activation, but must have missed something along the way. Is there a different type of upgrade disc for XP to Vista than upgrading from Vista to different versions of Vista? I want to make sure I am looking at the proper disc before purchasing. There are several on eBay, all look to be the same type of disc. My goal is to do the clean install, and if possible go from 32 to 64 bit now that I have 4 GB of ram and a t9300 to install.
I want to upgrade the hard drive in my Acer 4720 But i am confused with the hard drive types, the hard drives in my Acer4720 and D620 look different to the hard drive in my older C300 ... the Acer c300 has like pins where the hard drive connects to the computer whereas the ones on the dell and the 4720 look totaly different.
what is this "Different" drive called so that I can order the correct one?
My netbook Lenovo Ideapad S110 keyboard alway types uppercase letters, even if the caplock key are turning on or off. I must press Shift+Fn before press any letter key for lower-case letter. x it!
What's the difference between Latitude vs Inspiron Dell notebooks?
Now, I know that Latitude is for business use and Inspiron is for home use, but what does that mean?
Is there like any annecdotal evidence over the years that Latitude notebooks are more reliable than Inspirons? Less prone to breakdown? After all they were built for stability in mind. Is it worth paying the extra price for a Latitude model of comparable specs to an Inspiron model?
I received a new M1530 because the one I received have a couple of cosmetic flaws that were due to poor worksmanship (dents, scratches, etc.). I've been playing and comparing these two M1530's and I've noticed several things. My old M1530 came with the Optiarc DVD+/-RW drive and the new M1530 came with a Matsh1ta DVD+/-RW drive. I know a lot of people have complained about the DVD drive being noisy. Well.. the Matsh1ta drive is quiet! The Optiarc drive is super noisy. On to more things.. The old M1530 came with a Samsung 5400rpm 250GB harddrive, the new M1530 came with a WD 5400rpm 250GB hardrive.
None of that matters though because it has been replaced by a Seagate 7200rpm 320GB hardrive, and stuck the WD 5400rpm 250GB into my PS3.
OLD M1530: Optiarc DVD+/-RW drive (SUPER NOISY) Samsung 5400rpm 250GB harddrive MADE IN CHINA 6-Cell battery Cheaper Heatsink Assembly (Metal alloy transfer surfaces)
NEW M1530: Matsh1ta DVD+/-RW drive (PRETTY QUIET) WD 5400rpm 250GB hardrive MADE IN JAPAN 6-Cell batter Better Heatsink Assembly (Copper transfer surfaces)
The heatsink assembly is a big deal because we all know these things can get pretty hot, and we all know that copper has very good heat transfer properties. On the old M1530, the transfer surface is copper ONLY FOR THE CPU, leaving the GPU and Chipset with some metal alloy. Well the new M1530 I received have copper for all the transfer surfaces! COPPER IS BETTER!
There was a discussion on this subject before but I can't find it. Currently I own XPS 1330 with nVidia GPU and LED screen. My GPU died a while ago, was replaced.
After that I applied copper mod. But it will die some time in future again. So I'm thinking to replace my mobo with one that has integrated GPU.
Would there be any lag on video playback on the 8X Slot-Load Blu-Ray Reader versus the 4X Slot-Load Blu-Ray Reader/Writer for the Dell Studio XPS 1640?
Is there going to be much difference in terms of battery life between the 4 and 6 cell battery? I did read a review of the 1545 in which they referred to battery life as appalling - around 90 minutes.
I currently have a Latitude E6400 that I LOVE...except for the display. I bought it from the Outlet and it was such a good deal that I couldn't pass it up. But it has the WXGA (1280x800) CCFL display and I really wanted the WXGA+ LED.
I'm in the process of finding its replacement, again from Dell Outlet. I'm seriously thikning about stepping up a size to the E6500 and getting the WUXGA (1920x1200) display. The Outlet also has a surprising number of Precision M4400s in stock, too. I've also found several of those with the WUXGA display that I want.
I don't "need" the more powerful graphics card in the M4400. But I really like (make that- LOVE) the exterior design of the Precision
Seeing as the prices have come within about $300 of eachother for these machines, I was wondering if there is a major advantage going with Alienware over Dell on the laptops with the i7 CPUs?
I'm getting ready to buy the new FW490, but there's a processor difference I'm not sure of. Which is better? What's the overall performance difference between them?
Processor
* Intel® Core™ 2 Duo Processor T6500 (2.10GHz) [subtract $50.00] * Intel® Core™ 2 Duo Processor P7350 (2.00GHz) * Intel® Core™ 2 Duo Processor P8700 (2.53GHz) [add $50.00] * Intel® Core™ 2 Duo Processor P8800 (2.66GHz) [add $100.00]
I might be heading to the US and am looking into getting a new Z11 series. There are tons of models from what
I can see- do all them have the basic stuff like back-lit keyboard and light-sensors? Also, all of them have GT330 as well with Optimus technology correct
I'm winding down my search for a new laptop for business and personal use, and after a week or so of due diligence researching windows alternatives I've all but decided to return to Apple.
In deciding whether the MBP is worth an extra $400, my question to the Apple subforum is: What (other) differences are there between the MB and MBP?
Obviously, their footprints are different, and they have different screen resolutions, and the 9600 GPU is exclusive to the MBP. The MB isn't offered with factory 7200 hard drives, but since Macs don't need to be restarted as often as Windows PCs, I don't place a lot of value on that. I have a 1TB external drive w/ FW and USB. I'd be sad to give up Firewire, but I could live with using its USB connection...
What I'm wondering is whether there are other differences that add value to the MBP. I've read that, resolution aside, the MBP has a higher-quality display. Is there any truth to this? Is it that noticeable? Is it true, but inconsiderable? Or is it just flat-out wrong?
Along those lines, are there other differences that would make the MBP more attractive?
I wanted to share with the forum some strange, yet interesting findings that I've come up with in the last week or so.
First, some background. I am the IT manager/senior admin for my company. I do all of the purchasing and high end tech stuff, so I get to play with a fair amount of hardware and equipment before deploying it to the company.
For the last year or so, I've owned an E4300 as my work laptop, and have been purchasing E6400's to deploy to our company. Some of our consultants have dual internal hard drives using the Newmodeus optical bay caddy, and use an esata/usb combo port to power their optical devices when they need. We also utilize the Coolmax esata/usb enclosures for external drives. All of these devices work great on our older E6400's and my E4300.
Recently, I made another order of some E6400's and 2 E6500's as a trial. No matter what I do, the Newmodeus cables (I have a hard drive one as well) will NOT work with the E6500 and 1 of our new E6400s. Occasionally, by wiggling the cable in the plug and pushing hard, I can get a device to be detected for a few seconds. I decided to have Dell come out and replace the motherboard in 1 to see if I got a defective board.
Well, that didn't help at all, so I dug a little deeper. I borrowed a colleagues Coolmax enclosure, and plugged that in. To my amazement, it worked fine. I compared the esata cables....and the Coolmax cable is ~1-2mm longer than the Newmodeus cables.
The port depth on some of these machines must be a little deeper than others, not allowing the cable to fully seat and get a good connection. I have 2 E6500's and 1 E6400 with this issue.
My next plan of attack is to use a small saw to cut a little of the plastic off the Newmodeus cables to see if I can get them to seat a little deeper. I will report back my findings. I never thought something so simple would be such a PITA.
I'm in the process of identifying my next laptop to replace my 4 year old aspire and have come across the i5 core 5740 and 5942...
Both have the same processor i5 520 Both have the same graphics card ATI 5650 Both have a BD-ROM/DVD-RW
But the 5740 i've seen at £700 and the 5942 at £940.
Apart from a slightly larger hard-drive, the media board instead of the number pad and the backlit keyboard. What else would does the 5942 have that would constitute a £240 difference?
I'm interested in purchasing one of these two. Probably 15'' for the Studio or the 16'' for the Studio XPS.
I'm just a bit confused as to what the target users are, they seem very similar. From what I can see, the Studio XPS just has a better exterior and a superior display.
I intend to use the laptop for document editing, media (HDMI out to hdtv, most likely) and casual gaming. Price range is about 1300 CAD.
Hi i have considered getting a bluray drive for my Sony. I have gathered that these Lenovo's bluray drives likely can be used if they are stripped and i use my own bezel.
The UJ232A does not support DVD+R Double Layer and DVD-R Double Layer and i use this media and it is cheaper than the bluray alternative.
I have a Vostro 1500, which I bought 10 months ago. About 3 months ago the screen became loose and wobbled about 10 degrees when computer was moved or if I was on the train and it went over bumps. I tightened the screws as advised but this did not have any real effect. Dell engineer came and replaced the back cover with new hinges, (as they though hinges may be broken/at fault but they were fine,) but some wobble was still noticable so he ordered a new base. He came today and took the screen out complete with all the screen casing out of the old base, and put it into the new base, but still wobbled, so just put it back in the old base as it wouldn't have cured the problem.
Now yesterday, after he put the new back cover on, he had to take the plastic around the front of the screen off. After he put it together I noticed that the screen is no longer flush with the plastic surround and it annoys me! Am I just being finicky/picky or should I ask them to fix it?
Hi all, new person here. I did a search on LCD screens but can't find my problem anywhere.
Here's the background and problem:
Vostro 1500 with Chungwha 1280x800 screen that got cracked by my kids. I ordered a replacement screen from a company off Amazon.com that was highly rated. Got the screen and installed it. It is make by Chi Mei. When I powered up the computer I got 8 screens of start up and it was very dim. Once it went past the Windows start up screen everything went black. It would only continue to Windows screen, still showing 8 windows in safe mode. I hooked up the old screen and everything worked fine.
I contacted the company and they air expressed me another screen, which I received yesterday. Hooked it up and got the exact same problem, which leads me to believe it's the Dell that doesn't like it. I will try and attach some photos because I am at a loss.
when i first got this laptop i noticed that the screen was distorted and there was red lines everywhere and the screen was shaking abit. so i contacted dell and they sent me a repair guy to fix it. he fixed it in about 15min by pulling apart the laptop and replugging in the screen. but now its happening again. so i think the thing that plugs in is loose or somethin. so what do u think i should do out of the following options.
1. open it myself and replug it (im a noob and will try remember best what he did)
2. get techinician to come in again (bothersome as i have school)
I was browsing the internet a day ago and I was on a "COLLEGE" website so i know this is not due to a virus. At this time all of a suden my screen went black.
I powered the laptop off and turned it back on, The Dell logo appeared but the screen was fuzzy and had some "tearing" i dont really know what to call it but it doesnt look right. Kind of like an old VCR playing videos. The screen then whent black after the windows xp splash screen. The laptop still boots to windows but it does not display anything.
I booted into safe mode, everything functions correctly and the way it's supposed to. I then booted into VGA mode same thing everything functions and works the way it is supposed to. I also ran some virus scans just incase, nothing was found.
Whilist in safe mode i changed the resolution down to 800 x 600 and still no luck after booting in regular mode.
In VGA mode i tryed to change resolution and the screen displayed some blue fuzzy lines then whent black.
After this I booted back into safe mode and done severeral diffrent System Restores at diffrent dates. Still no luck
After going through all this I am assuming this is a GFX card problem. The laptop is about 3 years old and ive played games pretty hard on it ever since. The card has defenitly gone through some some stress. Can anyone confirm this?
I know that the i9300 sells for about 400 working, and i checked on ebay for a card that is a whopping 180 bucks. Id just assume buy a new laptop. Then sell the i9300 laptop for parts because everything else works fine. Or maybe buy the card swich it out and sell it for a price. Maybe there is a way to fix it i dont know. can anyone help?
Lastly, i thought i would add that when i check the bios the card is recognized and it displays all the correct info for the card. IS there a way to tell for 100% that the card is bad?
Just bought the 3521 Inspiron touch screen. Two questions:Does the touch screen require a screen protector? Many different answers. Would like your opinion!The outside cover shows fingerprints (even with clean hands). Can the outside cover be replaced to a different color or type (that doesn't show fingerprints)?