HP 15-n245ee OS/Software :: SD Card Reader Doesn't Work
Jan 14, 2015Since I got my laptop the reader wasn't working, I am thinking its not installed. Where can I get the software for it? My laptop is HP 15-n245ee.
View 3 RepliesSince I got my laptop the reader wasn't working, I am thinking its not installed. Where can I get the software for it? My laptop is HP 15-n245ee.
View 3 RepliesMy memory card reader was fine, however after reinstalling Vista Ultimate it won't work.
It shows up as "Texas Instruments PCIxx21 Integrated FlashMedia Controller" in Device Manager. However I've tried multiple SD cards and it just won't recognize that anything has been inserted. The computer doesn't pause or show any indication that it's doing something when I insert a memory card.
I have a Ferrari 4006WLMi with Windows Vista Ultimate.
I have tried uninstalling and reinstalling the drivers several times already. I have also upgraded to the latest BIOS
I need to use a 4GB SDHC card as RAM via Readyboost...
compaq tc 4200 sd card reader doesn't work, purchased with windows 8 already installed, bu the card reader doesn't work.
View 4 Replies View RelatedI upgraded my daughters Inspiron 1520 to Windows 8 and everything works well. The only problem we are having is the memory card reader does not work. Windows 8 recognizes it and shows the action center flag and advises us to install a new driver.. We install the driver R188776.exe, install it, and re-boot, but the memory card reader still doesn't work.. Is there another driver we can install?
View 5 Replies View RelatedI have a EliteBook 8730w sinds 2010 and I just installed Windows 8.1.Now I don't have any access to my SD reader.According to the device manager the SD reader driver is up to date and is working, but I don't see the SD reader in the file explorer.The SD reader is a RICOH.In the device manager I have some problems with Other devices:
1) Base system device
2) Base system device
3) Fingerprint sensor
4) Unknown device
I suppose that the problem must be in Other devices.
I reinstalled Windows 7 from disk, and can't get the Card Reader to work properly. I tried the drivers from the site and it installs but still doesn't work.
Here is my Hardware ID:
PCIVEN_10EC&DEV_5209&SUBSYS_1689103C&REV_01
I have tried everything to get this SD card reader to work but to no avail. Even a fresh install of W7/32 ... nothing... Every time i insert an SD card in the slot... i get a message. USB device not recognized ... one of the usb devices has malfunctioned & Windows does not recognize it... I am also just using a 2 g SD card not an sdhc card.
In the Device Manager.... it shows up as "unknown device" yellow highlight... try to update the driver ... says i already have the best driver..... when i take the sd card out...unknown device disappears... i have also re-installed the drivers from here for the card reader... but nothing....
Furthermore... it seems to lead to an error code 43 ..
Computer p/n ET831UA#ABA came with WIN XP Home Edition. Label states designed for Windows XP, Windows Vista Capable. I formatted the harddrive and loaded Windows Vista Business 64 bit. I downloaded and installed all drivers that were recommended by HP but my Sound and Audio doesn't work. Neither does my Mass Storage Controller nor my PCI Modem. All were working with the WIN XP.
View 5 Replies View Relatedthe wireless driver on the Dell website does NOT work. Googling this problem leads me to believe that I am not the only one with it.
However I have not seen anyone with a solution; most people are just linked to the Dell website and the Dell driver, which doesn't work at all.
I performed a windows 7 clean install on my vaio (VPCEB11FX).
After that i installed the drivers properly.In Device manager i am able to see the MMC card reader and SD reader with respective path letters.
But in when i open my computer only dvd drive showing there
I have a VGA plug in my Dell Inspiron 1545 and when I plug in the cord it doesnt work. I have another laptop and I used the same cord and it works. So I guess my VGA doesnt work, what do I have to get to replace the VGA in my laptop?
View 1 Replies View RelatedI have a brand new M4400, running W7pro x64. The M4400 came with an internal SD card reader. Now this card reader cannot read some standard SD cards (other work fine). Especially,
I have a Transcend SD 4GB 133x (http://www.bestpriceaudiovideo.com/i...ard-detail.jpg) that is problematic.
When I put the card in the reader, W7 tells me to format the card. This I do not want to do, of course. If I open Disk Management, it takes ages to open, and eventually shows the card as "Unallocated".
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
FDXGDFSGDFS
The camera I'm using it in does not show any problem.
GDFSGDFSG
I tried reinstalling reader driver.
GDSFGSF
I teste the reader with an old 16Mb xD card and this works.
FSGFSG
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
I bought a new 8935G and found that the card reader cannot read my 2GB H-Type xD card.
GSDFGS
The camera I'm using it in does not show any problem.
GDFSGS
I tried reinstalling reader driver.
FGFSG
I teste the reader with an old 16Mb xD card and this works.
SFGF
When I put the 2GB card in, Windows Vista says it has to be formatted; at this point the card is already unreadable in the camera and must be formatted againg there.
If I try to format on pc, the process stops at about 90% with an error.
First off, I know the fingerprint reader is not very secure. But since I have a new XPS 1530 with a built in reader, I want to make sure I can use it because 1) it's under warranty & 2) it's cool.
I've read the readers can be quite flaky so if I decided to actually use it to log onto my computer, I want to make sure I will also always have the option to enter a password instead
having trouble with the video as well . ATI control panel will not load , HP 8510-p.
View 3 Replies View Relatedjust got my dv8t back from hp after the recent bios update bricked it. reinstalled windows 7. Im trying to get my fingerprint reader to work. I installed the validity driver and the digital persona software. During the Digital Persona software, it said it cant confirm my fingerprint reader.
View 10 Replies View RelatedI recently restored my vaio TX750P/B using the built-in vaio recovery. However, my SD card slot doesn't seem to work anymore. The memory stick slot does work, and it shows up on my computer, but nothing for the SD slot.
I've tried reinstalling the drivers to no avail...
just moved to BD+ and my Power DVD 7.3 can't handle it anymore and I'm getting really frustrated with trying to get my blu rays to work. Cyberlink is a terrible company probably run by like 3 guys. The customer support is awful and I can't get anything to work anymore. I'm begining to think that getting blu ray on laptops was a bad idea. WHo knew they were going to change things on a month to month basis.
View 13 Replies View RelatedI have an Thinkpad edge E530 Laptop with Firefox 30. In this browser the Fingerprint Reader software Does not work.
View 4 Replies View RelatedI recently saw that my M1710 has an card reader...
Can I use it for reading mijn debit/creadit cards for online banking,... or not?
I put in my SDHC card from my camera and it does not read or see the card.
I have Vista Premium 32bit.
Is there are weird firmware I have to get?
I am just thinking is SD Controler in E6400 is SDHC capable?
View 3 Replies View Relatedi have this laptop, great laptop, works great; however, the sd card reader has not worked in ages. I have tried upgrading to new drivers, reloading old drivers, etc etc....The driver company is ricoh.
View 5 Replies View RelatedI've an HP 6510B and I don't know which is the sd/mmc card reader driver to download.
Actually the card readibility is not available under my system. I' ve installed win xp professional.
When I insert my SD card into my laptop. It does not show anything in my removal drive area. I have used more than one SD card with same result.
My operating system - Windows 7 Ultimate (64-bit)
SD card - Digital camera SD Card
I have searched the boards and have not found an answer to my built in SD card reader not working any more. It worked fine until a couple weeks ago. When I go to "my computer", the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
View 9 Replies View RelatedI have a new X240, and the fingerprint logon no longer works after the computer resumes from standby or from a lockscreen (screen saver). I have checked other solutions here and in other sites, namely:
1. unchecking the power option of the fp reader in device manager,
2. and switching the 30-day standby in Lenovo Settings
Neither of those solutions have worked. I have the latest BIOS and FP driver versions. I made sure the the FP was enabled in BIOS, and I even switched the settings to allow internal FP reader only. Still, the FP will only work when I first power on the laptop, but not after resuming from stand-by. I have checked in Device Manager after manually entering the password, and it says that the FP is working properly.
I upgraded xp to win 7, like we all are going to have to do, but can't get the finger print reader to work. It does show in devices that there is one on the machine. I downloaded the drivers for Vista but they got me nowhere.
View 3 Replies View RelatedI have an xps m1330, I have windows XP media center installed on it, the media card reader works fine for my 2gb sd card,
but when i stick in my 8gb sdhc pny i just bought from best buy, the laptop doesn't recognize it,
i've downloaded the latest ricoh driver from xps m1730 windows xp on dell's site but no success