HP Dv7 OS/Software :: Unable To Install Update Software Utility
Oct 9, 2013I have a HP DV7 notebook computer and I received this pop-up message recently and I cannot install software. How to install?
View 8 RepliesI have a HP DV7 notebook computer and I received this pop-up message recently and I cannot install software. How to install?
View 8 RepliesI'm looking for a Lenovo B575 bios update/flash utility since my BIOS has gone bad. I cannot change/save changes and cannot restore to defaults.
I cannot find bios updtae on lenovo site (not on drivers for B575 and not under the drivers matrix). I've even tried via "Phoenix" as it's their Bios, no good. And even via a third side component (biosagent plus) that should have Phoenix bios, still no good.
I have a small issue with my Lenovo G580 (20150). I have Windows 8.1 and i have noticed that my 4GB of RAM DDR3 run at 800mhz. I have searched for everything, even swapped the RAM but there is no change in the frequency, it simply runs on 800mhz. I have tried to update the BIOS from 5ECN39WW (v 3.05) to 5ECN96WW, but whenever i try to do that it comes back with the error message "DC detect error!".
View 3 Replies View RelatedHave an HP Envy Touchsmart 15-j057cl. I am unable to update to Windows 8.1. I have done the following:
1. Installed all windows updates.
2. Gone to HP support page for machine and installed all driver updates.
3. Run Windows compatibility manager - no issues identified.
4. Removed preinstaled Norton. No virus software enabled.
5. Attempted update from Windows store.
6. Black screen.
Reverted to Windows 8. Windows reported various error messages across various attempts including:
0xc1900101 - 0x3000D
Then -
1. Disabled Ralink bluetooth and wifi drivers
2. Attempted windows 8.1 update from windows store
3. Black Screen
Reverted to windows 8
I've tried very hard to ensure I've gotten all of the latest drivers and BIOS, including chipset drivers. I have not installed any other software. I've also disabled any driver that I can afford not to have, yet the update continues to fail.
I need to get back to work.
On the dell driver download page there's no bios update available when I filter by my service tag, but if I go to all related updates for this product it's up to A09. The bios and video bios were shadowed.
View 3 Replies View RelatedI own a HP Pavilion G6 2105tx with Windows 7 64bit version. The Problem is that im unable to update my GPU driver. I searched this site and downloaded the appropriate driver for my notebook. But when i tried to install, i receive an error message that my notebook is not supported. I rechecked and im sure that i downloaded the correct driver listed for my notebook model. My Graphic card is Intel HD Graphics 4000.
View 9 Replies View RelatedI am unable to update the BIOS on the Thinkpad listed below.I have tried to run Boot CD version of the update program (using CD player in dock) and it reports the error:"The system program file is not correct for this system"..The Windows based BIOS update program reports the error (in or out of dock):
"The process does not recognize this system. The process has been cancelled"..The Lenovo support page lists the new BIOS as being appropriate for this model. The BIOS reports the correct model and serial number.I desire to update the BIOS only as part of a software reload / refresh of the laptop. No actual problem with current BIOS to my knowledge.
Thinkpad X220
Model 4287 2VU
Current BIOS 1.11 (8DET41WW) 2011-03-28
Attempting to apply BIOS 1.37.1.24 (2013-02-06)
I have bought acer laptop.
1. This is Extensa 6702ZNWLMi
2. Intel Pentium M processor 735A
3. DVD-Dual double layer
Now when i press the power button it start and after some processing shows the following:
Linpus Linux Basic Edition v9.2 b060419c
[root@ localhost /]#
Now i dont understand this command [root@ localhost /]# and after this command cursor is blinking to write some thing.
I also dont know that how to launch that window in which i can change the boot priority. In my pc that i use in home i press del after starting my computer and a window comes where i change my boot priority and then boot from cd windows xp and install it. But in this case i dont know how to install xp. and my next question is that can i play cd in DVD-Dual double layer.
I own a Vaio FW series and I found that the Click to Disk Editor doesnt run at all as well as that the vaio update fail to update this particular application.
View 4 Replies View Relatedi am using hp15-d017tu notebook.It's comes with free dos but i install it to windows 8 pro.Yesterday i update my windows ,after updating the windows i can not change my start screen,acount picture and lock screen that mean all pwrsonalize is not working also i can not install any software from windows store.
View 9 Replies View RelatedSystem: HP Pavilion DV4-1125nr Notebook PC
Product#: FR922UAR#AB
System Board Id: 30F7
BIOS Version (before update): F.12
OS: Windows 7
I tried to upgrade the BIOS to F.55 which was provided by HP. After successfull installation of new BIOS windows shutdown properly. I start the PC again, HP Logo appears, and then nothing happen. The OS does not load or boot at all.
I also tried to boot using Windows 98 Second Edition CD (to load DOS) but this also did not work.
After booting from the XP SP3 disk, I could format the Vista partition and the laptop re-booted after copying the installation files. After boot-up and the Windows XP screen, came the installation screen. The laptop stut down after about a minute on this screen. I tried again but to the same effect.
The disk is ok and there is no disk read error.
why Windows Player is not working after installing a new HD on Latitude D630? I downloaded the AUdio driver from DELL website.
View 10 Replies View RelatedI have a HP Pavilion dv6-6154tx laptop. My current version of BIOS installed is Hewlett-Packard F.1B, 05/10/11.I wanted to check if my BIOS is up to date, and if there was a newer version of BIOS available.
So I went to the HP Support page for laptops (URL...) and chose Pavilion Notebooks > Models dv4000 to dv6999 > dv6000 Entertainment Notebook PC series > Matching products outside the United States.
But alas, I could not find my laptop's model listed there. There's dv6150tx and then it jumps to dv6161ea, but no dv6154tx. Is there any other way I can update my laptop's BIOS?
I just updated my G780 to Windows 8.1 this morning. every time I boot up the computer, I get an Error message stating" Dolby Advanced Audio - Unable to start the Dolby Audio driver. Please restart the computer or reinstall the driver if the problem persists. I have restrtaed the computer and I do not know where the driver is for this or where to install it. Computer is just over a month old.
View 9 Replies View RelatedI'd been having problems with the microphone not picking up voice well after upgrading to Windows 8.1. I went to Lenovo's website and downloaded IDT audio driver version 6.10.6490.0 for Windows 8.1 64bit. I ran the exectuable that was downloaded and now the Microphone works much better however now Dolby Advanced Audio is unable to start. I get the following warning message everytime I start the laptop:
"Unable to start the Dolby Audio driver. Please restart the computer or reinstall the driver if the problem persists."
Restarting has not worked. Running the driver executable again did not correct the issue.
I found this solution on the support forums but it is unclear about what to uninstall in "Device Manager"[URL]..."Open Device Manager Uninstall the Audio Device Under Audio inputs and outputs"I have a Microphone, Speakers, and Stereo Mix listed under Audio Inputs and Outputs.
I have this "problem" since I got my Z. When I start vaio update 3 utility I get this error "messageID=0008" there are no updates for your model bla bla...
However when I go to vaio support page, there are some new updates for my Z590N model (new Bios, USB patch...)
I have downloaded new version of Viao Update utility 3.2.something but I had to uninstall my current version (3.1.something), which I did. However when I started this new setup message poped up "there is no previous version installed" - abort.
I have checked esupport page where is said if you have problems with Vaio Update 3, to download Sony Shared Library which suppose to contain vaio update utility), I run installation but it doesn't install Vaio Update 3
Now, I can live with this esupport page regular visit updates,
If kindly help a brother out. I just bought a Studio 1537 for my lady and i was unable to install windows 7 64 bit RC. It's saying
"the version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (bit) or x64 (bit) version of the program, and then contact the software publisher."
i just bought an acer aspire 5102wlmi without a HD for a friend. so i went and bought a HD and proceeded to install windows XP home service pack 2.
the problem is it constantly stays in a loop, i load and boot from the disc, it copies all the files, reboots, loads the files, says starting windows, and then just starts all over by going back to the setup screen. i've formatted the drive and made multiple attempts. had anyone else had this problem? if so what is the solution?
When I am trying to install driver installation, it says unable to install
Is it configure bluetooth or not? Is bluetooth supported model or not?
HP g72-b67ca
Product number: XR830UA#ABC
I bought a lenovo G50-40 Laptop recently. The Specs are as follows:
8GB RAM
1TB HDD
AMD A8 Quad Core APU
Radeon R5 M230 Graphics Card with 2GB graphics Memory
I installed Windows 8 Enterprise 64-Bit Edition. I am facing is that I am not able to install the drivers for R5 M230 Graphics. I updated the BIOS, tried downloading latest drivers from AMD website too. Still, the system is just not recognising the hardware. It is showing up as Video Controller. But I am unable to install driver even after using driver update option.
I have recently purchased HP 15-d009TU Notebook PC. It came with DOS installed. I have installed Windows 7 64 bit OS. I have downloaded the drivers listed in Drivers & Download section in HP.com but most of these drivers (Intel chipset driver, Graphics driver, Audio driver, etc.) do not work. While trying to install, most of them says that it does not meet minimum system requirements although all the system requirements mentioned in the requirements list are present.
Now, I am unable to use even the USB ports in my laptop.
I'm not able to install the latest graphics driver from nvidia. It installs the latest GeForce Experience software but that says the 332.50 driver is up to date. The 337.88 driver is WHQL certified and lists compatibility with the 860m but when trying to install it, it says "This graphics driver could not find compatible graphics hardware." On nvidia's website, it says "Your product manufacturer requires you to download a driver for your device from their website" but it's 332.50 is pretty outdated at this point. Any way I can get the updated drivers installed?
View 9 Replies View Related I don't have the ssd msata option in the laptop I just purchased from Newegg so I decided to buy a samsung 840 250g ssd and do a clean install of win 7.Updated ssd to latest firmware, disabled secure boot in bios, sata was already set to ACHI, installed ssd and started loading win 7. It would get to the point that the tiles are floating around and it says "starting windows" and then locks up. Tried this several times and same thing.
Finally tried changing boot mode from eufi to legacy it works fine. I got win 7 installed. Now if I try to go back to eufi boot mode it just goes to a black screen (on start up) and displays detecting media (or something like that).So I guess my question is:
1. Why did I have to switch to legacy mode to begin with
2. Does leaving it in legacy boot mode affect performance?
One last thing, since installing win 7 I have been unable to install the nvidia drivers downloaded from dell for win 7. It either starts and immediately fails or it installs a little then I get a blue screen and the computer reboots.
I just bought an Insprion 7520, and upgraded the windows os to ultimate. However after reading few reviews of this os, I wanted to switch back to Home Premium so that it would be like I bought it. However after installing Home Premium, some of the drivers that I downloaded from the Dell Drivers and Downloads website were unable to install. These problems have also lowered the laptops score in the Windows Performance Index. The GRAPHICS score went from 6.6 to 5.6 and RAM socre 7.9 to 7.7.
-Intel Rapid Start Technology : "The system does not meet the requirements" (It did when I bought it. What has changed I cannot understand.)
-Seagate Firmware v 0005DEM1, A05 : Got a FAILED message in the dos screen.
-Dell-Hardware version GS002D, A02 : Got a message saying "Not compatible with x64 systems".
I have the service tag and the express service code if needed.
Model: HP Probook 4530s
OS: Windows 7
I have both Intel and ATI switchable graphics in my laptop. I recently reinstalled Windows & If I try to install the ATI drivers from the drivers CD or from the HP website, the laptop hangs on the Windows logo after a restart and I have to do a system restore to fix it. If I try to install just the Intel driver it just gives me an error that says "This computer does not meet the minimum requirement to install the software". I am unable to change the brightness and the resolution is bad. In Device manager both the options under display adapter say "Standard VGA Graphics Adapter", with a yellow error sign over one of them. I am worried if the graphics card is damaged from over heating. Is it possible to disable one of the cards to check functionality of the other?
I have an ENVY 17 (3277nr) with windows 8.1 in it but I'm unable to update it since several months ago so I decided to reinstall the OS so I went to the windows site that lets you download an ISO image of windows 8.1 to burn it into a disc (right now I dont have a 4gb usb at hand but is also possible).
I already burned the disc by right clicking the ISO and selecting 'burn disc image' and changed the boot options but every time I turn on my computer all I see is a single underscore and then the regular windows 8 boot screen.
I already visited wbesites in this regard and I've read things like the windows 8 UEFI thing (not on my laptop since I've upgraded from w7) and the security settings on the BIOS but none of them seem to fix the problem.
Additional details:
Oddly, when trying to open the burned dvd it only says 4.37gb out of 4.37gb, do you think my dvd drive might be damaged?
HP 1000-1327TU Notebook running on windows 8 (64 bit) chinees. actually my brother purchased the HP 1000 laptop in china and gifted me , it is running in chiniess language operating system . iam unable to change the language to English so i decided to uninstall win 8 and install win 7 .but unfortunately it is not booting from cd , how to install win 7 in this laptop
View 3 Replies View RelatedI recently had to replace the hard drive on my Studio 1558 laptop and reinstalled the operating system using the disk that came with it. All went well until I had to reinstall the device drivers to get my device to access the internet via wifi. So far, I can't seem to get the driver for the device that allows my laptop to see any wireless connections and have to plug in a network cable to go on the internet. how I can get the right device drivers other than using the device driver disk?
View 2 Replies View RelatedUnable to install Graphic Drivers for HP Pavilion 15-n278tx Notebook
View 9 Replies View Related