HP OS/Software :: Unable To Install Drivers On 15-d009TU Notebook
Apr 20, 2014
I have recently purchased HP 15-d009TU Notebook PC. It came with DOS installed. I have installed Windows 7 64 bit OS. I have downloaded the drivers listed in Drivers & Download section in HP.com but most of these drivers (Intel chipset driver, Graphics driver, Audio driver, etc.) do not work. While trying to install, most of them says that it does not meet minimum system requirements although all the system requirements mentioned in the requirements list are present.
Now, I am unable to use even the USB ports in my laptop.
I recently bought HP 15-d009tu Notebook PC.I do not have any drivers installation CD along . How and where can I get the wireless lan driver for HP 15-d009tu Notebook PC which will support the Windows 8 32 bit ?
I have this HP envy 17 j000eb notebook with Windows 8 that I really would like to get rid of.
I managed to install Windows 7 on it, but it doesn't recognise some hardware.
Luckily audio and video works as well as the touchpad and DVD-rom, but I don't have any of network adapters installed, nor USB, and I still cannot find any drivers for them.
It shows a dozen of pieces of hardware needed to be installed.
After downgrading from windows 8 to windows 7 the usb slot on the right side of the laptop is working, nut the two on the left hand side are not working. Windows driver search says no driver found and unidentified ERROR.
I'm not able to install the latest graphics driver from nvidia. It installs the latest GeForce Experience software but that says the 332.50 driver is up to date. The 337.88 driver is WHQL certified and lists compatibility with the 860m but when trying to install it, it says "This graphics driver could not find compatible graphics hardware." On nvidia's website, it says "Your product manufacturer requires you to download a driver for your device from their website" but it's 332.50 is pretty outdated at this point. Any way I can get the updated drivers installed?
I don't have the ssd msata option in the laptop I just purchased from Newegg so I decided to buy a samsung 840 250g ssd and do a clean install of win 7.Updated ssd to latest firmware, disabled secure boot in bios, sata was already set to ACHI, installed ssd and started loading win 7. It would get to the point that the tiles are floating around and it says "starting windows" and then locks up. Tried this several times and same thing.
Finally tried changing boot mode from eufi to legacy it works fine. I got win 7 installed. Now if I try to go back to eufi boot mode it just goes to a black screen (on start up) and displays detecting media (or something like that).So I guess my question is:
1. Why did I have to switch to legacy mode to begin with
2. Does leaving it in legacy boot mode affect performance?
One last thing, since installing win 7 I have been unable to install the nvidia drivers downloaded from dell for win 7. It either starts and immediately fails or it installs a little then I get a blue screen and the computer reboots.
I have both Intel and ATI switchable graphics in my laptop. I recently reinstalled Windows & If I try to install the ATI drivers from the drivers CD or from the HP website, the laptop hangs on the Windows logo after a restart and I have to do a system restore to fix it. If I try to install just the Intel driver it just gives me an error that says "This computer does not meet the minimum requirement to install the software". I am unable to change the brightness and the resolution is bad. In Device manager both the options under display adapter say "Standard VGA Graphics Adapter", with a yellow error sign over one of them. I am worried if the graphics card is damaged from over heating. Is it possible to disable one of the cards to check functionality of the other?
I recently had to replace the hard drive on my Studio 1558 laptop and reinstalled the operating system using the disk that came with it. All went well until I had to reinstall the device drivers to get my device to access the internet via wifi. So far, I can't seem to get the driver for the device that allows my laptop to see any wireless connections and have to plug in a network cable to go on the internet. how I can get the right device drivers other than using the device driver disk?
I have HP n278tx laptop and recently I installed Windows 8.1 OS and now I can't Hibernate and Sleep my lap.When I do that it get stuck.And also I can't install chipset drivers provided by HP for Win 8.1 Pro. I can't install these 2 drivers.
I recently purchased this laptop and I have no alternate nvidia drivers, when installing i get the error message no compatible hardware found. I have already tried adding my device to the .inf list with no success, i might be doing it wrong?
Both intel HD 3000 and nvidia GT 625M drivers are listed on my product driver page but i do not know if I'm limited to what comes pre installed.
i installed windows 7 ultimate 64-bit on my HP Pavilion G6-2005ax after formatting. I downloaded and installed all of my drivers from here . But 'Ralink 2011 802.11 b/g/n WiFi Adapter ' and 'Ralink 802.11 b/g/n Wireless LAN Adapter Driver ' fails to install. There is yellow symbol on 'Network controllers' in Device manager. I could successfully install the Bluetooth driver but i cant search any device, neither it gets discovered.
Setup:Machine: HP 640 G1 NotebookOS: Windows Professional x64Using HP image: No
Problem description: First off both plugged in mice and the touch pad work. I would like to disable the touchpad when typing. According to Google searches and HP support the touch pad should be able to be disabled and enabled by double tapping in the top left hand coner of the touchpad. This doesnt work.
Diagnostics: So far I have upgraded the BIOS to 01.05. Updated the firmware Intel Entry Management Engine (ME) Firmware Component to 9.0.22.1467. These 2 were under the guidance of HP support.
Uninstalled and reinstalled the Synaptics TouchPad Driver (International). I have tried both 17.0.18.23 and 17.0.18.17. These both fail with the following error message below
Worth noting: After I uninstalled then reinstall the Synaptics application doesnt return to the add remove programs list.In device manager the touchpad doesnt list under mice and other pointing devices.I have declined HPs offer to have the touchpad replaced as its not just 1 machine, its all 20 of them. Also it works fine during normal use.
I own an HP Envy dv6 Notebook PC, MOdel No.2CE243OCYT. It has an Atheros AR9485 802.11 b:g:n WiFi adapter. There is an HP update for that adapter, but when I updated it, I was unable to connect to the internet. I realize that this WiFi adapter is only for 2.5G. I had to refresh my laptop, then I had internet access again. I have not tried that driver update again, but TWC just updated my Cable modem to dual band using the 2.5G and 5G bands.I am afraid to install the Atheros update in my lapotop again because I don't want to go though the hassle of re-installing all my software pd[rograms again.Is there a dual band WiFi adapter that HP recommends, and is it easy to install?
I have had an aspire 5920g for about 18 months now and it was all working fine until I updated the graphic drivers, but the drivers stopped installing halfway through and now I can't install any graphic drivers.
I tried to install my original drivers and they won't install. The system keeps freezing and I think thats the problem.
I've tried making a recovery disc but erecovery won't recognize blank DVD's and acer 'support' are only too happy to grab you by your feet, turn you upside down and let all your money fall out so they can charge you for a reovery disc - absolutely ridiculous - instead of actually trying to help me.
And also for some reason a yellow triangle appeared next to the ACEYTS4Y IDE controller a week after I got it but up until now didn't seem to cause any problems.
I have bought acer laptop. 1. This is Extensa 6702ZNWLMi 2. Intel Pentium M processor 735A 3. DVD-Dual double layer
Now when i press the power button it start and after some processing shows the following: Linpus Linux Basic Edition v9.2 b060419c [root@ localhost /]#
Now i dont understand this command [root@ localhost /]# and after this command cursor is blinking to write some thing.
I also dont know that how to launch that window in which i can change the boot priority. In my pc that i use in home i press del after starting my computer and a window comes where i change my boot priority and then boot from cd windows xp and install it. But in this case i dont know how to install xp. and my next question is that can i play cd in DVD-Dual double layer.
After booting from the XP SP3 disk, I could format the Vista partition and the laptop re-booted after copying the installation files. After boot-up and the Windows XP screen, came the installation screen. The laptop stut down after about a minute on this screen. I tried again but to the same effect.
If kindly help a brother out. I just bought a Studio 1537 for my lady and i was unable to install windows 7 64 bit RC. It's saying
"the version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (bit) or x64 (bit) version of the program, and then contact the software publisher."
i just bought an acer aspire 5102wlmi without a HD for a friend. so i went and bought a HD and proceeded to install windows XP home service pack 2.
the problem is it constantly stays in a loop, i load and boot from the disc, it copies all the files, reboots, loads the files, says starting windows, and then just starts all over by going back to the setup screen. i've formatted the drive and made multiple attempts. had anyone else had this problem? if so what is the solution?
I installed Windows 8 Enterprise 64-Bit Edition. I am facing is that I am not able to install the drivers for R5 M230 Graphics. I updated the BIOS, tried downloading latest drivers from AMD website too. Still, the system is just not recognising the hardware. It is showing up as Video Controller. But I am unable to install driver even after using driver update option.
I have an HP pavilion ZE 4500 Laptop that came with Windows Xp I have install windows Vista but having issues with ethernet controller ,PCI Moduim,( no internet)and the Media driver (no sound) So i installed Windows 7 and still haveing the same issue. Need drivers
