HP Envy M6-k010dx :: Fn Key Locked
Sep 9, 2014I have a HP Envy m6-k010dx and it seems like the fn button is locked. Every time I hit the volume or brightness buttons it is like I was holding down the fn key as well.
View 1 RepliesI have a HP Envy m6-k010dx and it seems like the fn button is locked. Every time I hit the volume or brightness buttons it is like I was holding down the fn key as well.
View 1 RepliesHave an Envy M6-K010DX notebook. Due to an internet problem while upgrading from Win 8 to 8.1, the PC doesn't properly boot and Windows Explorer won't load. Decided to 'Refresh' the OS and went to the F11 restore utilities. When I go to the refresh utility and follow the prompts I reach a message that says, "The drive where windows is installed is locked. Unlock the drive and try again." I've searched support for unlocking instructions and aside from some bootrec commands (that didn't work - probably because I don't have a Win 8 disk) not much is available.
The only access I have for running commands is via the Task Manager and F11 command prompt. What is this 'locked' drive, anyway?
I installed windows 7 on my hp envy m7-k010dx and everything worked fine. but i got a new haerdrive and reinstalled it and all my drivers but the bluetooth doesnt seem to want to work. the system knows its there but it cant find my bluetooth mouse. do i need to reformat everything and reinstall?
View 9 Replies View RelatedI have a hp envy m6 sleekbook model. anyways ever since I installed windows 8.1 fresh my touchpad wont work to a point. Ill install the driver and it works fine till I shutdown the laptop and restart it. Im pretty sure the driver is auto updating and not working correctly.
My model: HP ENVY m6-k010dx
However, I'm using Linux. The button is completely not working - LED diode that's next to it isn't working too. I know it's driver issue, since touchpad requires driver with this feature. Is there such driver for this touchpad for Linux?
View 7 Replies View RelatedGot a new Envy 15t and spent a couple of hours with it and then left town and had a big project and when I came back 3 weeks later and powered up, the password I always use didn't work.
If I had used a new/different password when I set this up, I would have written it down and I can't find anything in the file that would suggest I didn't use my normal PC password.
Is it possible that I never reset the password? If so, is there a standard password that the laptop is shipped with?
I have an envy laptop m6 and when I turn it on a blue screen comes up that asks for an administrator password. I have tried it multiple times and then it says system disabled and gives the code 85508345. Is there a way to reset the password?
View 5 Replies View RelatedI'm having some issues accessing an HP Envy M6. After 3 failed password attempts, I get System Disabled, 65302195
Is there a way to reset the bios password?
Model: HP ENVY 15T TS j000
I can't boot from USB to install windows, can't refresh, can't reset, too.
lost/forgot all passwords(embarassing event) now notebook locked in boot menu F2-F12 with screen that says please type in admin oradmin password.also disc stuck in drive as it will not eject in boot up system.
View 7 Replies View RelatedI have an XPS Gen 2 Laptop. I know its like ancient now but after 3 years its still running pretty well. The problem is I'm getting severe fps drops in games and I realized something strange happened to my cpu.
The cpu load is going crazy because the cpu clock speed is locked at 800mhz.
I thought it was something wrong with SpeedStep but I turned that off and nothing changed. My cpu will not go past 800mhz.
Why is my cpu downclocked and what can I do to make it normal again. Dell BIOS doesn't really let u manipulate anything.'
CPU-Z shows
Core Speed: 798 MHz
Multiplier: x 6
Bus Speed: 133 Mhz
Rated FSB: 532
My friend was given an E1705 (electronics pallet) that has BIOS p/w locked. It has an MX25L8005 bios chip. Can the password be read using an eeprom reader?
View 11 Replies View Relatedafter using for sometime(one is i locked my laptop, go out for few hours. the 2nd time is when i watching movies for around 15mins), the keyboard will somehow "off" or "disable", means u still can use the mouse, clicking everything n its fine, but the keyboard just cannot type anything.
i than decided to restart the laptop. but than after the os shut down, the laptop unable to restart. its just black screen. so i press the power button to off it. switch on, n it never boot up, not even bios appear. tried a few times unable to on.
i than plug out the power, which than able to boot up successfully on batt.
the cpu of my pc acer aspire 9423 xp media center is blocked at a frequency of 1Ghz, while an Intel T5500 CPU is expected to operate at 1.66 GHz. I changed my HDD, the ram and cpu for intel T7200 and always my cpu to 1ghz.
View 4 Replies View RelatedHow to get into the Bios of a Pavillion G6 laptop that has got a password protecting it. After 3 attempts I get the system disabled, it gave me a code 71690505 ....
View 1 Replies View RelatedThe number keys on the right are locked and I cant use them. When I press the numlock key it just beeps and a pad lock open and shut on the screen. I bought this laptop especially for these number keys.
View 2 Replies View Relatedi've been aware of the bluetooth widcomm and the logitech software causes the moment where you'll get a black screen after the windows loading screen then you just need to restart the laptop to enter into windows.
i really think that this is the cause in my case because whenever i disabled the logitech webcam, i don't get any locked up, although when i enable it, then restart the machine, i don't usually get the locked up.
The weird part is that when i leaved the laptop at least for some few hours (note that i enabled the logitech webcam here), the issue arises, so i need to restart the laptop using the power button once to get inside windows.
My solution here is to disable the logitech webcam which i don't like because whenever i need the camera the laptop will ask me to restart the computer.
I would like to ask if there is any other solution for this? any new software?
i don't like to uninstall any software unless its really the solution.
My old Acer Ferrari was protected with a bios password that i personally used. However I was giving away my old laptop and tried to clear out my bios password for its new user.
What happened was i simply put nothing when it asks to enter the new password in the bios..i just hit enter. Now the system keeps asking for a password when i have none to give. Even the old password doesn't work, as does just hitting enter. I don't know if anyone still knows tricks of the trade for this old system but anything could be helpful.
I've been trying to find a backdoor password but I can't find any that works and Acer won't help me cause I don't have warranty anymore since the laptop is old.
My dell xps 12 ultrabook has been disabled after three failed attempts the password on boot. But now that I put the correct password continuously telling me the password is incorrect.
View 3 Replies View RelatedWe have bought a bunch of Latitudes E7240 and deployed them with the new Dell Data Protection | Security Tools (DDP|ST).Now we have discovered that if you attempt to login with the wrong credentials the device (HDD) will be locked.This is expected as it is one of the purpose of having Disk encryption enabled BUT if a user accidentally lock the HDD by typing wrong credentials you would expect to be able to UNLOCK it with the admin password. (You create one when first enabling DDP|ST)
So, the user forgot he's credentials and the screen only shows "The device is locked, contact your administrator" and with NO OPTIONS what so ever! How do I, as the administrator unlock the HDD? Where do I type the admin password?
My laptop, DELL Inspiron 1440 Model number (42L) will not let me log in. My hint is 'mtw dog' but I can't figure out the correct password and I can't find it anywhere.
View 1 Replies View RelatedLaptop was working fine but for some reason is now starts up with a blue dialog box asking for an admin or power on password.
After several goes it now gives me a 'system disabled' dialog with the code 71086585.
Grandpa did something to his computer. He has been locked out and the system will not boot.
"Power on Password" prompt, dont know the password.. three times and the code i get is:
52107170
Everytime I boot up the laptop, I get halted with the blue box asking me for the bios password.
I know this laptop is quite different and that even removing the cmos battery for like a day is not going to help. There is no 24xxx chip that I can short on the mobo.
Then I found SST39VF040 bios chip on the back of the mobo and also found a 93lc86 bios chip too .....
i bought my wife a netbook, as she specifically requested, thing is, on 3cell 3hrs are great, but it has begun to "tear" a lot in WINXP.....
background services...etc have been seen to
so i check out CPUID and lavalys.....both showing Proc working along at 800mhz....i have tried to change power profile in XP ..... and tried making a new one, but there is no way to reduce that tearing effect...... it feels a bit sluggish to me, i am going to add a 2G module (accepts Elipda 2G module from my HP DV5T) so some RAM along those lines is wha i am aiming for......
how to stop/ allow the laptop to clock on OS load....cuz the 800mhz on the netbook is unacceptable.
I want to be able to scroll with my pointing stick using the pointing stick middle button, but no matter what I set it at with the synaptics software it will only perform the action which the touchpad middle button is set at.
Am I missing some check box I need to uncheck, or something else that I am not seeing. I already tried updating the driver and uninstalling it and reinstalling it, and I tried it with the touchpad disabled, but nothing has worked.
My mouse is locked and or frozen. I do not have a password so I can hit enter to get to my main screen. I have tried doing what the dell site said to do and does not work. Told the unlock button is the key to the right of the f12 key.
View 1 Replies View Relatedmy laptop dv 2000 key board is locked and mouse clicks brings only the proprty window or opens controle panel menu. my os is win vista ultimate . I have tried a hard reset by removing battery . connected external key board and mouse .no use .
View 1 Replies View RelatedI have Pavilion Dv6 laptop that suddenly has a problem. On the sign up screen and under my username, the word "locked" is now present. How do I get rid of it?
View 3 Replies View RelatedMy company recently purchased a E6420 from eBay, and upon turning it on we were admin locked out of the whole system.How to get into the system?
View 2 Replies View Related