Lenovo E320 11e E/Edge :: Unexpectedly Powers Off When Changing Its Position?
Apr 17, 2012
My ThinkPad Edge E320 isn't but a few months old, but I have been noticing a problem with it. I want to know if others are facing similar problems and if there is any solution for it.
The laptop powers off completely when I move it. But I have noticed that it does not happen if I am REALLY careful with it, and move it holding the two sides.
There seems to be a 'soft-spot' on the underside of the laptop that causes it to switch off immediately when it's pressured. And moving the laptop holding it at the bottom causes exactly that.
View 6 Replies
ADVERTISEMENT
Mar 13, 2012
About half the time I boot up my laptop the bios hangs and I have to hard-reboot it to get it to work. Is there anything I can do?
View 2 Replies
View Related
Jan 5, 2014
I have purchased last December a Lenovo G505s laptop (A8-5550M). Everything worked great since last week.
Since then the laptop is shutting down unexpectedly. It usually happens when I play a video game.
I think it is sth about cpu or gpu temperature.
I noticed that it happens more "easily" when I use high performance energy plan.
View 2 Replies
View Related
Oct 23, 2012
I have had the W530 for several months now and it randomly powers off. This can occur when connected to the AC Adaptor, when running on battery, or when using the AC Adaptor without battery. Lenovo first replaced a fan, but that didn't solve. Now they are attempting to replace the system board.
W530, i7-3610QM, 1920x1080 FHD, 16 GB RAM, K2000 NVIDIA GPU, Muskin mSATA, 500GB 7200rpm, Bluetooth, Centrino 6300 AGN WiFi, Win8 Pro
View 9 Replies
View Related
Jun 10, 2014
I have a W500 running Windows 7 which unexpectedly turns off, usually when asleep but sometimes also while on. The turn off happens as if the power is lost (say, the battery/AC cord are yanked out). After a turn off like that, I sometimes need to reconnect the battery and the AC cord. Did some reading here and elsewhere on the web and came upon the electrostatic suggestion. Was able to get it to turn back on at least a few times by touching the underside of the laptop, but that worked inconsistently.
Since it mostly happens when the unit is asleep, I pretty much ruled out the temperature and software issues.
Decided to check out the memory section pin bending solution. My laptop has to have it's palm rest taken off to access the RAM modules. People kept referring to some RAM door pins but since mine doesn't have a special RAM door, I bent some pins on the bottom of the palm rest and so far, not power loss but too early to tell.
View 4 Replies
View Related
Apr 8, 2014
I've had the laptop since last Friday. I've updated drivers and have been installing a few games on the device.
I've been installing a ton of games the past two days while I'm at school (great download speeds from steam and origin) and have been having issues when I try to run said games.
The laptop has a SLI setup with the GT 755M. I've noticed that when I've tried to game lately on the laptop that I've had pretty poor luck. Games seem to crash with frequency, with only a few different times that I thought had narrowed down to SLI being enabled or Anti-Aliasing, but after it crashing a few minutes ago not long after getting into a Team Fortress 2 server, I now don't think that is the case.
What might cause this? I have the battery removed at the present since it's Nearly charged and seems pointless for me to leave it in while I'm running off the 170W adaptor. Could this be an issue where the adaptor doesn't supply enough power and needs to draw additional power?
I don't feel that heat or anything else like that could be the cause because there's no warming and the system powers back up just fine. I'm going to re-attempt to play a few games that crashed immediately (Battlefield 3) and see if this changes anything. I love the laptop otherwise and really hope that this isn't and indicator of a more serious issues.
View 3 Replies
View Related
Jun 5, 2013
I own an Edge 15, 64 bit processor. It came with 2gb RAM. I recently purchased and installed two 4 gb cards for a total of 8gb RAM. I updated my BIOS. Under "Computer>Properties" it is showing only 4 gb Install RAM. Why is it not reading or the system not using the additional 4 gb of RAM on the second card?
View 3 Replies
View Related
Oct 14, 2014
I have a quad core Lenovo W520 (i7-2820QM) equipped with Intel AMT. I have all RAM slots populated (original 2GB in each that came with the machine). I have updated to the latest BIOS (1.42 at the time of writing) and latest Intel Management Engine Firmware 7.1 (7.1.85.1216 at the time of writing). The machine has Crucial 256GB X100 SSD installed in the main compartment and a regular HDD in UltraBay.
The computer acts normally in sleep mode and restart sequence only when Intel AMT states that "ME is in recovery state..." during boot.
When it looks like AMT is happy problems begin. The problem is that when I'm trying to put the computer to sleep it goes all the way until the end per normal procedure and then suddenly decides to power itself off! Obviously Windows doesn't like this and displays recovery suggestions after starting the laptop again. This happens when connected to AC and also when disconnected from it. Also, when computer reboots it turns off all power (i.e. the display along with backlight, indicator LEDs turn off and fans spin down for a sec) inbetween and automatically starts up after that.
I've tested this on Windows 7 and openSUSE 13.1 (which I had lying nearby) and same behavior happens on both OSes. On Windows, all the latest drivers and updates were installed. So I don't think this is driver nor OS dependent - rather firmware/hardware related problem.
What is funny, it doesn't matter whether Intel AMT is activated in BIOS or not. What matters is whether the Management Engine is in some kind of recovery state or not. When it's not, computer starts acting crazy as stated above and behaviour is repeatable. Intel AMT itself seems to work however. Changing the power policy in Intel ME configuration doesn't work for sleep issue.
Some things I've also tried doing:
* Replace CMOS battery (measured its voltage before putting it in, of course) with a new one - no effect
* Tried two different brands of SSDs (OCZ Vertex 3 and Crucial X100) - no effect
* Tried both legacy and UEFI modes - no effect
* Scanned RAM for memory errors - no effect
Could Lenovo try to repeat this issue and possibly do something about this?
View 1 Replies
View Related
Nov 9, 2008
I couldn't find any info on this and seem to have figured this out. On the Dell I got (Studio 1735 / Windows Vista Home Premium), the volume dialogue (the volume slider that appears when you press the up/down volume media touch buttons) showed up in some strange place in the upper left corner. I wanted it in the lower right corner.
So, follow the following steps:
1. Find the Quickset Icon in the icon tray. Right-click it and "Exit".
2. Fire up regedit (Start > Run > regedit).
3. Go to HKEY_LOCAL_MACHINESOFTWAREDell Computer CorporationQuickSet.
4. Backing up is strongly recommended as when performing any operations with the registry. At least back up the part you are changing. To backup, just rightclick the Quickset node and do "Export" to a file.
5. Find VolumeDlgX and VolumeDlgY keys. These hold the x&y position of the volume dialogue. Change them to whatever you want (note that by default the values are in HEX, but you can change them to decimal when setting them). I used the position of BrightnessDlgX/BrightnessDlgY (the Brightness dialogue which did appear where I wanted it) as reference).
6. Reboot the computer.
Note that if you start Quickset without rebooting, it appears to overwrite the registry values with the ones that were there before the change.
View 10 Replies
View Related
Sep 21, 2003
I have in inspiron 4100 for about 14 months. I have noticed that while typing, the cursor my move back to a different position in the line, move to a previous line, or jump to another text box altogether. It drives me crazy that when I type, I never know if there is some combination of keys or if I accidently touch something to make the cursor change position.
Is there by default some combination of keys that cause cursor movement. It has happened 4 times while typing this message.
Can this be turned off?
View 14 Replies
View Related
Dec 24, 2012
I`ve just received my new notebook and I had already bought the SSD drive I would like to use with it.In the first moment I thought it would as easy as described hereURL.... but my notebook has the windows 8 and the OKR 8.0 and I can't find the option to create recovery discs.
I found out that I can make a recovery media, a pen drive with at least 16Gb, to recovery the system. I would like to make the same with DVDs. create the recovery discs or to reinstall the windows 8 from scratch with the same license key (not even sure if I have one) the one preinstalled in my notebook?
View 5 Replies
View Related
Aug 4, 2009
Why the zoom % of webpages randomly changes whilst I am surfing the internet with Mozilla on my Lenovo S10e laptop? It is very frustrating and when this happens I go down to the right hand corner of the application and select 100%. Is this a zoom problem or just the fact it is resizing the pages because of the screen size being very small. Are there any updates or software needed to overcome this problem.
View 9 Replies
View Related
May 21, 2014
I have just bought the Flex 15. I looked at the power settings and set the brightness, but it is ignoring the settings and always either darker or brighter than I want it. It keeps flickering between being darker and brighter and it's giving me a headache. It is unplugged if that makes a difference, I haven't used it plugged in yet to know if it does it then. How can I stop it? I've looked through the settings and can't find anything.
View 9 Replies
View Related
Jan 25, 2015
I had a problem for a few days now, sometimes, out of nothing, the screen color turns yellowish....like a warm color....i right click in the home screen, personalize, display, calibrate color, the template for color calibration appears, i enter next...and voilá, it comes back to the cold white color....it just happened as i turn from tent mode to laptop mode to wright this thread
Any other way of disabling this change?
View 2 Replies
View Related
Sep 21, 2009
Seems there's some sort of odd issue with only some apps running under SL where they don't retain any sort of settings as far as where the window was.
Preview, for example, always opens in the same not-actually-"maximized" position no matter what I do to it. I open a lot of PDF files, so I'd like to be able to specify how they open. (A plus would also be to auto-select the annotate -> comment function).
View 4 Replies
View Related
Feb 12, 2014
I have the Lenovo Y400 laptop with Intel Core I-7 processor and Nvidia Geforce 650M Graphics chip. The laptop came with windows 8 and is now running windows 8.1 At the time of purchase I opted to go for a model with a standard HDD and no MSATA SSD for caching.
I have recently purchased a 128 GB "My Digital SSD - Bulletproof 4" MSATA SSD and installed it.
I installed the Intel Rapid Storage Technology software and it shows the drive, but does not give me any options for acceleration or caching.
Based on my research so far, it seems I need to enable RAID mode in the BIOS (SATA setting is currently at AHCI).
The only other option shown is to change it to "compatibility mode" which it identifies as IDE.
Is there a way to switch the BIOS to RAID mode so I can use my MSATA SSD for caching without having to reinstall windows?
View 1 Replies
View Related
Jun 3, 2011
the way the F keys have been switched on my Edge 14", today I came across some time to fiddle around with it. I googled what I needed to do...and came across this question on yahoo, which is exact what I need. I bought Lenovo Thinkpad Edge several months ago, and I really like it so far. But I use MS Excel a lot and I always use shortcut keys which involve F1~F12. On my thinkpad, I always have to hit "Fn" and "F1~F12" keys simultaneously, and it is a little annoying since I've been used to using F1~F12 keys without hitting "Fn". So I went to BIOS keyboard setting, and enabled the Function key lock. It became a little bit better, because now I don't have to hit "Fn" and F1~F12 simultaneously, but I could press "Fn" AND THEN, F1~F12. But what I really want is the "Fn" key always on without pressing it. On the BIOS screen, it says hitting "fn" key twice keeps "Fn" key always on, but whenever I hit it twice and hit F1~F12, it doesn't function like F1~F12 key, but it just controlls the sound volume or display light. Is there any way to keep "Fn" key always on without pressing it everytime I want to use F1~F12 keys?"
In short, in the BIOS page, once "enabled", you are able to double tap the Fn key and have it stay on without you pressing it each time; however, it doesn't appear to work that way and turns off everytime you use a F key.
View 3 Replies
View Related
Nov 7, 2009
The thing they call "edge to edge glass" which is really just plastic above an ordinary screen. The thing is, that the screen under that edge to edge plastic is a nice anti-glare screen, no kidding! You can see this if you take your laptop in sunlight and tilt it the right way.
So what's happening is you're getting the worst part of an anti-glare screen (reduced contrast ratio) plus the worst part of a glossy screen (unless you have a really pretty face).
I took the plastic thing off, cut along the black/clear border, pulled out the middle, and stuck the centerless border back on the laptop.
Result? THIS SCREEN IS FANTASTIC. Yeah ok, of course I would say that. But if you knew me, you'd know that was way out of the ordinary and really meant that THIS SCREEN IS FANTASTIC.
One thing you may not have considered is that the screen in its default position has yet another flaw, both sides of that glossy plastic thing are glossy, so some of the light coming from the screen is reflected back to the screen, and as you know light reflected onto the screen has a yellowish tint. That is my guess as to why the whites on this screen are really really white now, and the screen is much brighter. This also explains why other 300nit screens used to look so much brighter than this.
I will have more pics when I am able to charge the battery to my good camera. If anyone has any questions about removing that plastic thing I'll be happy to answer your questions, it's actually pretty easy. For those interested, here is how I did it:
1. I removed the "star" head screws, this was accomplished not with a special star head screw driver, but an ordinary flat head precision screw driver.
2. Put some paper over a hacksaw blade to avoid scratching, wedged it under the plastic near the top where the camera is, and snapped out the first of the several lock-in points on along the top edge. I proceeded to detatch the rest of the top of the screen in this way.
3. Both the left and right sides were held on mostly by adhesive, the very edge point locks in slightly, but the efforts removing these sides are focused mainly on separating the adhesive bond.
4. I pulled upward on the plastic and it came right off, there seems to be no adhesive or lock-in points on the bottom side.
5. Using the center of the screen as a test area, I tested several cutting utilities and decided on the utility knife. To my surprise, the plastic was about 1mm thick.
6. I clamped the screen down to the table, with a straight edge positioned 1mm inward of the black line, to give headroom for errors.
7. I cut along these lines, and repeated step 6 for each side, and pushed out the center to reveal the border piece that now resembled a common laptop screen enclosure border.
8. I used a medium grit sand paper to bring the cut lines to meet the black lines, and finished it off with a fine grit sand paper.
9. I applied some electrical tape to the area between the edge of the screen itself, and the edge of the laptop on the right and left sides because there was light leakage, and then popped the border back on and screwed it down.
Found the charger! Here's the high res shots. They do *some* justice to the screen quality.
View 10 Replies
View Related
Aug 4, 2009
How does this screen do for viewing blu-ray movies? I know that everyone is raving about the RGBLED, but if this option is still good, then I'll go with it, because it's about $250 cheaper...
View 9 Replies
View Related
Nov 7, 2009
I went insane and cut along the black-to-clear border of the m1340 screen thing. The thing they call "edge to edge glass" which is really just plastic above an ordinary screen.
The thing is, that the screen under that edge to edge plastic is a nice anti-glare screen, no kidding! You can see this if you take your laptop in sunlight and tilt it the right way.
So what's happening is you're getting the worst part of an anti-glare screen (reduced contrast ratio) plus the worst part of a glossy screen (unless you have a really pretty face).
I took the plastic thing off, cut along the black/clear border, pulled out the middle, and stuck the centerless border back on the laptop.
View 5 Replies
View Related
Aug 14, 2009
[url]
Heres a video I made to demonstrate the ammount of flex on the edge to edge lid. It does have flex and bend, but its not as bad as the one j3n82 reported. I recorded with an iPhone so the video quality is crap. Also forgot I had left it in portrait mode when I recorded it (I didn't have a tripod so I used a cup lol). But I hope it gives some of you a basic idea of the quality. I thought openning the blinds to allow the vertical lines will show the bend/flex a lot more. I was applying quite a bit of pressure, although it doesn't seem like I was in the video. I felt as if any harder I might have damage something, or maybe pop the edge to edge screen out. I used an 8lb dumbell, I think thats the limit.
If you noticed the cloth I used to cover the keyboard when I closed the screen, I did this this to avoid getting the smudges on the screen when I pushed the lid down onto the keyboard.
At the end of the video I tried showing the Edge to Edge display, notice how theres another layer of screen over the bezel. Thats the difference between the edge to edge.
View 10 Replies
View Related
Nov 20, 2012
I just bought an Edge 130 and wanted to set it up today. But I just can't enter the BIOS! I keep pressing F1 during the Lenovo splash screen. I've pressed it repeatedly, held it down, I even tried it with the Fn button pressed. Nothing worked.
I've have been working with and professionally supporting Lenovo (and before IBM) notebooks for over 10 years and not once did I have such a problem. This is only the second E-series notebook I have ever had. I bought myself an E525 last summer and had no such problems and at work we have T-, X- and W-series.
View 7 Replies
View Related
Aug 13, 2012
ThinkPad Edge, Win 7 Sp1. For the last month I have had a problem with the control key always down. Programs react as if the control key were pressed. MS Word 7 gives an error message that the control key is down and asks if I want to go to Safe Mode. I have had the keyboard replaced with no change. The computer has been thoroughly checked, all drivers, patches, software upgrades have been made by my Tech, and the Bios has been flashed.
Last week, I found a post on Google for Win XP where the poster had the same problems. The fix was to ensure that the Sticky Keys were turned off in Ease of Access on the Control Panel. I went to Ease of Access and turned off all of the selections, and the fix seemed to work. However, yesterday the problem reoccurred. I don't know if it is a problem with the motherboard, hardware, or with Windows. It appears that this problem affects more than one version of Windows.
View 9 Replies
View Related
Feb 20, 2014
My Edge E40 has no display, I tried
-Hard booting... 60 secs of holding power button without battery or A/c adaper
-Removing the RAM HDD CD and tried booting
-Attaching to my old CRT monitor
NOTHING works
How can one find if it is booting at all since there is no HDD indicator in E40..??
View 3 Replies
View Related
Jan 15, 2015
I have a Lenovo Thinkpad Edge E530. Occasionally I will have the following icon pop up on my screen and refuse to go away: A reverse google image search told me this is the logo for the "thinklight", which as far as I know is not actually equipped on this model. As a side note, I have seen this happen on a friend's E530 as well.
View 4 Replies
View Related
Apr 21, 2008
I'm encountering having just purchased my laptop. None are dealbreakers and I'm not that put off by them but the fact that I'm not able to figure out a solution bothers me. Primarily, no matter what power setting I'm on or settings I change the display will turn off after 1 minute. Ther other power settings still come into play when they should (computer sleeps etc.) but I'm not able to delay the screen turning off.
View 5 Replies
View Related
Jun 17, 2011
I'm planning to change my 320 GB HDD to 240 GB SSD. I know the SSD is smaller than my previous HDD, but I just use it for Windows, I will store my data at external drive.My problem is how to transfer all partition from HDD also resize into SDD.My HDD have 4 partition, bold is must transfer to SSD
System_Drv (1.46 GB, System, Active, Primary Partition)Windows7_OS (111.76 GB, Boot, Page File, Crash Dump, Primary Parition, 40 GB free space) --> this one I need resize to fit onto SSDData (167 GB NTFS, Logical Drive) --> I don't really care about this partition since it will not fit onto SSDLenovo_Recovery (17.58 GB, Primary Partition, 5.32 free space)
View 3 Replies
View Related
Apr 10, 2013
I needed to reinstall Windows 7 and everything seems to be working after Lenovo replaced the system board but I'm unable to install a wireless adapter driver. How do I know which kind of adapter is in my system ? When I enter 0319 3UG as type I get a whole bunch of Wireless LAN drivers. Tried them all but none seems to work.
View 2 Replies
View Related
Jun 1, 2014
I just received my new E545 and booted it up. I've noticed the CPU is quite hot and so ran some software tests. It is showing the CPU temp around 92 degree C / 196 degrees F.
The chip is an AMD A10-5750M. I take it the heat isn't normal. Should I be sending this back to warranty?
View 1 Replies
View Related
Jul 18, 2013
my express cache doesn't seem to be working. i've recently had to format my laptop, ive got it all back working and installed the latest express cache software, everytime i run ECCMD.EXE -INFO from ele.exe i just keep getting the following:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>eccmd -info
ExpressCache Command Version 1.3.110.0
Copyright® 2010-2013 Condusiv Technologies.
Date Time: 7/7/2014 0:34:31:581 (JAMES-THINK #0)
Failed to retrieve product license information.
View 9 Replies
View Related
