I want to reformat my C:/ partition but I've lost (or never had?) my original windows home cd that came with it, nor do I still have a recovery partition. (I wiped it all out...)
Where do I find an acer win xp version so I can reinstall and use my my original windows key?
I have a Acer 5670 laptop and I am wondering if anyone knows where I can find 2 things I want to upgrade for it.
The first is a 7200rpm hard drive instead of the 5400 it has right now.
The second is, I would like to increase the memory for 2gb to whatever I can fit.
I installed the Acer Webcam software & driver and just the driver separately, the download files came from the Acer website. Neither of these allowed me to use my webcam.
When I first got the laptop, the camera was working fine, so it isn't a hardware problem. I recently changed my OS to Windows XP Pro SP3.
The software (both the Orbicam software and the thing in My Computer for windows that usually lets you use the camera) say that another software is using the camera.
Is there a list of latest CPUs that could be used with Aspire 5670,beside the T2600 that mentioned?how about the T7600 and SP9300...?
View 10 Replies View RelatedI've been looking for hours for a LAN driver for this laptop...my wifi works perfect via the Intel Software from the acer website. But the usa/european site doesn't have the LAN driver. I lost the original CD.
View 6 Replies View RelatedI have ACER ASPIRE 5670, and i want to change its HDD but im not sure about what to take instead. I found this WD 500gb
"Western Digital Caviar Blue 500 GB Bulk/OEM Hard Drive 3.5 Inch, 16 MB Cache, 7200 RPM SATA II WD5000AAKS " but im not sure will it work or not? how can i know if my HDD is SATA or SATA-II or IDE?
My orbicam is functioning properly but when I close my laptop lid, my computer makes a sound and when I open the lid, my computer says that new hardware was found. This "hardware" is recognized by my computer as "Acer Orbicam #2" which means for some reason, my laptop thinks that a new camera is installed or plugged in everytime I close and open my lid.
Also, it searches for a usb driver that it says the camera can connect to to go faster. But there is no actual camera, it is just recognizing my orbicam twice for some reason. This causes a problem since after awhile, when I close and open my lid, my computer goes blue screen and restarts on me.
My acer loaded in xp as normal but my keypad and mousepad were unresponsive so i did a clean install with xp(not acer recovery) that ran through to when you do user input and froze again now i have a new hd and the same thing is happening except when i load into safe mode then everything is fine,
View 4 Replies View RelatedI own an ACER Aspire 5672Awlmi (5670 series) notebook
Intel Core DUO 1,73
120Gb SATA @5400
ATI Mobility X1600 up to 512hypermemory
2Gb DDR2 Ram
etc
My only problem is its temperatures from the first day i bought it - especially during summer months.
I found some threads that mention downvoltaging as a possible solution and o downloaded all the appropriate software. The thing is that my CPU temperature remains at 84 - 90 C and as all tutorias agree i need to make experiments to see over which voltage my laptop is not crashing and having blue screens. Has anyone set up a similar laptop (or a laptop with similar configuration) to tell me the voltages used to make it run?
Am totally new here. i need to change my HD that is 100 gb came with. i bought 250 gp but i dont know how to remove old hard drive. how can i remove old hard drive from Acer Aspire 5670 ? I opened the HD lid but then lots of stuff in side under silver cover.
View 4 Replies View RelatedI own an Acer Aspire 5672AWLMI (5670 series) Inter Core duo 1,7, 2GB Ram,
Ati Mobility Radeon x1600, 120GB SATA HD @ 5400rpm.
I am thinking of making 2 upgrades after 2 years of great functionality (despite the fact that it rises high temperatures and i mostly use it on Thermaltake's TaiChi cooler)
1)Upgrade exesting HD to
Hitachi Deskstar 500 GB Internal SATA Hard Drive
7200 RPM, 16 MB Buffer - Serial ATA 3.0 Gbps
2) Upgrade RAM to 3 or 4GB
The reason i am writing is to ask if this Hard drive is compatible with my mobo or should i try to update BIOS or is not compatible at all.
What is the best option for RAM - modules, vendors etc
I have a new Acer Aspire E1-572 and after setting it up, created a Windows 8.1 Recovery USB. When testing it, I find that when booting from the Recovery USB,
I'm prompted to select my keyboard and then to boot from the EFI USB. It then restarts and prompt me to select my keyboard etc.
I just purchased an Acer E511 laptop with windows 8 and am wondering if the acer recovery management program can be removed. I noticed that when I go into settings, change pc settings, I can recover using windows 8. Will this option be removed if I uninstall Acer Recovery Management? What's the difference between the two?
View 3 Replies View RelatedI may have destroyed the recovery partition when I used EaseUS Partition Master to split the C: partition into two partitions. How to recover the partitions necessary for recovery? When I do to Advanced Startup, I do not get a 'Troubleshoot' option.
View 9 Replies View RelatedHave an Acer Aspire MA52 with W8.1 .... How to recover the Recovery partition ....
View 2 Replies View RelatedRecovery software disapeared from drive d in windows 7 on presario cq62 209wm. How do I restore the program?
View 1 Replies View RelatedI have an HP Pavillion model 17-e019dx running Windows 8. Every time I turn it on, it stops at a blue screen that says
Recovery
Your PC needs to be repaired
A required device isn't connected or cannot be accessed
Error code 0xc000000f
When I press enter to "Try again" it come back with:
File:WindowsSystem32winload.efi above the error code listed above.
I have tried the Recovery and after MUCH time waiting, it still comes back to the above mentioned screen. I have also run all the diagnostics that are available on the laptop and everything come back normal. I don't have the original discs or documentation as I "received this laptop as a "gift/curse" . It is, however, registered to me.
I just purchased an Acer E511 laptop with windows 8 and am wondering if the acer recovery management program can be removed. I noticed that when I go into settings, change pc settings, I can recover using windows 8. Will this option be removed if I uninstall Acer Recovery Management? What's the difference between the two?
View 3 Replies View RelatedI have recently purchased an Acer Aspire VN-591G which came with Windows 8.1 preinstalled.
I now wish to reset it to factory settings and I can't seem to do that as I have accidentally uninstalled the Acer Recovery Management software.
The recovery partition is intact, but I can't seem to be able to do anything with it.
I tried booting up using Alt + F10 but it opens up the default Windows 8 boot screen, where if I choose to reset the system it asks me to insert the recovery media (which I don't have as the system only came with the recovery partition).
I think I spent 3h searching through the internet trying to find the Acer Recovery Management software that comes with Windows 8.1 (which I'm hoping will be able to access the recovery partition and use it to restore the laptop to its original state), however, it seems that this is nowhere to be found.
I find it absurd for Acer not to provide this software as a download for their systems - how would you be able to use the recovery partition in case of a system failure ?
i tried booting up directly on the recovery partition but I didn't manage to do that (maybe I was doing something wrong - got an error about the disk not being a fixed MBR disk ?
Trying to set the recovery partition as active from the disk management screen in Windows is even more useless. I can't assign it a drive letter either to try to access it (I found some forums post that was suggesting to copy the boot files on the primary partition to allow the system to boot into the Acer Recovery Management screen directly.
I had a bad hard drive and HP sent me a new one with 3 recovery discs. I installed windows 8.1 using the 3 discs and got an installation failure message. No error code, just a message with the option to save log, quit, or retry so I retried. Hours passed and I got the same message. Called HP again and the woman told me to run an extensive hard drive test. So I'm waiting 4 hours now for that to do it's thing.
The original hard drive told me there is an imminent hard drive failure upon turning the laptop on every time. Other than that it works fine... so far. I've had the laptop almost a month now and this problem started too late for me to return it to the store....
Is it possible for me to use a recovery disc from the origional hard drive on the new one? I'll put the old one in again and make one.I really don't want to send the laptop away unless there's no other option.
Product Info: HP ENVY TouchSmart 15-j013ea Notebook PC
I was having few problems with my computer so using HP Recovery Media Creation I created a USB recovery Key, after using it I was able to factory reset everything but now my windows in not activated, I spoke to Microsoft but they told me to speak to HP about this matter, I am soo confused now
I also decided to update to windows 8.1 to see if it solves any probelm as thats what I had before the factory reset but it is still the same and on the desktop there is a small message which says "Windows 8.1 Build 9600"
I need to download the Recovery Manager for windows 8, my laptop is the HP TouchSmart 15-b130eaI had to replace the HDD and install windows 8, since doing this i have now managed to sort out the original HDD and found that the recovery partition is still intact with all the files needed to do a full Factory Restore, sadly i canot do this, unless i can download the RM for windows 8?
View 5 Replies View RelatedI have Acer Aspire 5742G notebook and I'm having problems installing the Windows 7 OS on my new SSD hard drive (I bought the SSD because the original hard drive is failing and making blue screens all the time...)For the factory restore, I'm using restore discs. I burned the discs few years back when the laptop insisted me of doing it (by using eRecovery or something, 3 dvds total).
The computer tries to install the OS with the dvds (asks to insert a dvd and then press a key). The actual problem is that the installer is just going in loops, restarting and eventually freezing in the end.. Reboot -> Acer logo -> Windows is loading files... -> Starting windows -> Reboot -> etc.That kept going for more than a hour (on the first dvd!) and suddenly it just froze on the "starting windows" screen.. So I had to reboot and star over again.I can still use my old formatted HDD, should I make new set of recovery discs or use an USB drive?
I have an Aspire V3-772G. I can't create a recovery drive anymore. I ran reagentc.exe in command-prompt and it's pointing to the correct recovery location, but Windows RE is disabled and for some reason I can't reenable it.
Here are some screenshots to describe the problem :
im planning on buying windows 7 ..
I am a proud owner of acer 7520G ,and my lappy started acting slowly after 1 year of horrible terror or windows vista...
I made those recovery cds , also i got that 10gb partition PQSERVICE...
This service works only when you got their vista+acer signed OS?
IF i install windows 7 will i be able to recover old vista via hidden partition or recovery dvds?
Will i be able to make recovery dvds and recovery partition on win 7 with acer tools?
ive just finished setting up my new acer ES1-512, And was about to make my recovery media through the acer console in windows 8.1, and the program will not open ? i get to the part where it wants me to allow the program to make changes, but then nothing happens ? i have tried going to the file location its self to to start the program but this makes no difference, ive looked all over acers site to see if i can re-download the console but have found nothing?
View 4 Replies View RelatedI have tried to restore laptop to oringal factory settings using Gateway Recovery Management disks purchased from Gateway. I have booted from System Disk (1 of 4) which ejected and instructed me to insert Recovery Disk 1 which loaded files (100%). Recovery Disk 1 ejected and instructed me to insert Recovery Disk 2 which also loaded files (100%). Then a "Restore Progress"window opened and and the process progressed to 79% and gave the following error messages: "WIMApplyImage fail. Error0x570" and "Fail to Restore Image".
Prior to attempting the Restore process, all I get when I start the Gateway NV59C laptop is the following screen:
Windows Boot Manager
A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
If you have a windows installation disc, insert the disc and restart your computer. Click “Repair your computer,” and then choose a recovery tool.
Otherwise, to start windows so you can investigate further, press the enter key to display the boot menu, press F8 for Advanced Boot Options, and select Last Known Good. If you understand why the digital signature cannot be verified and want to start windows with this file, temporarily disable the driver signature enforcement.
File: windowssystem32ootwinload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file. what is causing these error messages?
I just bought a DV5se laptop and dv6t. Both have windows vista on it with the usual bloatware.(also as u know there is a system recovery partition which i wont touch)
I would like to install win7 rtm which is coming on monday.
Two reasons for doing this:
-Heard that 7 is faster than vista and
-to get rid of the bloatware.
I will do a clean install i.e Format c and install win7.
The question is when I turn on the computer(and when the hp logo comes) it says press esc for startup options. if u press esc there are a number of options like system information and system recovery. If i format c will these options be still there? specially the system recovery option.
Secondly is there any disadvantage in formating the preinstalled vista and clean installing Windows 7 RTM as vista was preinstalled by HP itself(in terms of being optimized etc, is there such a thing?)...
My HP G50 will start but the Windows Vista will not upload. I've pressed the F 10 and F 11 buttons. Memory is good. I've backed up my files using the F 11 back up function. I've tried to go back to an earlier date using system restore, no results. Can I reset the computer to factory defaults, there is function in the F 11 button, and then retrieve my files. Do I need a recovery disc?
View 2 Replies View RelatedI own a VGN-Z37GD VAIO and I'm wondering what happens to the recovery drive once Vista is upgraded to Windows 7? Does the recovery drive also get updated or is it necessary to create a new one yourself?
View 4 Replies View Related