I have a vostro 1510 and I need to restore my laptop to how I first got it. Ive read about pressing f8 and it taking you to the advanced boot screen and that you just press the down arrow keys to repair your computer...the only problem is that there is no repair your computer option on that screen.
View 10 Replies
I am trying to restore my laptop (studio xps 16) to factory settings using the recovery image. If I look in my computer, i can see C and D drives.
D is my recovery partition with 7gb full out of 10gb. This is good and dandy except when i open the D drive, there is one folder that says RECOVERY that is empty. Why is it empty when there are 7gb's of files in there? I already have hidden files shown
trying to do a factory image restore on my Studio XPS 1640. I've done this before on other Dells but this one I don't see the Dell image restore option as said in the booklet.
I don't see the Dell Facotry TOols either. I just have the following: startup repair, system restore, system image recovery, windows memory diagnostic, and command prompt.
I chose system image recovery and it doesn't pull up anything - it's for my own images I made. No option to pull up my Dell factory image which I still have in it's own seperate partition.
The hard drive of my inspiron 17R 5720 got broken and all the info was lost with it (including the windows 8 image to restore) so i purchased a new HD, but obviously I cant restore the OS that came with my laptop,
How can I get the Restore Image again? can I download it from somewhere?
I don't want to lose my windows licence key
i been trying to restore my dell N5010 but there is no image where to restore it from or i cant even recover it to an earlier date. the computer stopped working and it keeps telling me to do automatic repair but it fails and send me to a menu where i can restore it or recover it but there is no image to factory restore it or there is no date to go back to.
View 5 Replies View RelatedMy Dell ATG E6410 basically completely crashed. Nothing from the hard drive was salvageable (including any of the recovery files). I contacted dell support and they sent me 2 dell DVD's. They are labeled as "DELL SOFTWARE RESTORATION DVD".The only problem is, THEY WILL NOT BOOT! I have tried booting directly from the Bios and no luck what else.
View 9 Replies View RelatedI have an inspiron 1720 laptop 6 years old and have done an image restore to try and return it to its original state. I have a recovery partition and a factory.wim file.
I run command prompt as an administrator and use: imagex /apply e:dellimagefactory.wim 1 d:
This appears to restore, takes around 20 mins to reach 100%, but on rebooting the machine its still in its current state....Do I need to do an extra step? what have i missed?
I have a Studio 1558 where I want to reset to do a Dell Factory Image Restore. The instructions say to press the F8 Key when the Dell Logo appears. So far the F8 key fails to work.
View 5 Replies View RelatedI got a brand new VOSTRO 3660 with x3 USB 3.0, and since it has no CD/DVD my only option of creating Factory Recovery Image with DataSafe is thrught USB
which is USB 3.0.
I have done some digging before posting, and I understood that I had to enter to the bios and change USB debug Mode to Enable in order to make it work as USB 2.0 (Disable USB 3.0 functionality to install Windows 7 from a USB Flash Drive).
thing is that I tried that several thing to recover the windows 7, deleted the usb flash drive and made several copies and in the end of it I always get to a screen which tells me that "if you are trying to restore your pc from usb 3.0 ................change to a different usb port " .
Dell Insprion 1545
I recently did a factory image restore on my Dell laptop because I couldn't seem to get rid of a virus on my computer. The factory image restore was completed successfully but now windows will not start up. Startup repair says
"cannot repair this computer automatically-
Problem event name- startup repair offline
Problem signature 01: 6.1.7600.163.85
Problem signature 02: 6.1.7600.163.85
Problem signature 03: unkown
Problem signature 04: 21200839
Problem signature 05: Autofailover
Problem signature 06: 3
Problem signature 07:Failure during setup
OS version: 6.1.7600.2.0.0.256.1
Locale ID: 1033"
I performed regular diagnostics on the computer and all tests were passed. I also did a custom diagnostics test on the hard drive and all tests were passed, except for the last test it said "there is no flash drive in the card reader". Which I believe is probably normal?
My computer only came with two disks from the store. One titled 'Drivers and utilities-for reinstalling dell insipron laptop computer software', and the other titled 'Application- for reinstalling cyberlink powerDVD DX 8.3 software for windows 7'. I do not have a cd for windows 7.
My laptop (studio 1537) in running very slowly - so i need to either reinstall vista or do a factory image restore - I don't have any disks. if i do a factoryy restore will dell utilities be reinstalled automatically? if not where do i get them from?
How do I reinstall vista, and does this wipe personal files?
Acer aspire 5742. HDD crashed. I nstalled WD HDD. Booted with recovery disk. 1st screen US english next. second screen no OS in box. tried restore with image you have created earlier. could not find image. tried other recovery tool, Recovery Management. will not let me click on completely restore system to factory defaults. If I go back and click install drivers the disk has many applications and drivers. Put the old HDD back in and booted from disk. It allowed me to click on restore to default but when finished and restarted nothing. restarted wit f2 and with old drive in shows no HDD
View 6 Replies View RelatedHP pavilion model -17-e054ca
After upgrade to Window 8.1 PRO I seeC: 932 GBD: 28 GB -listed as recovery. I want to save system image backup Currently to create system image backup I have only option to create image on external drive or on D:
1. Is possible without reinstalling windows create new partion E: in order backup system images to it? If yes how create new partition in win.8.1?
2. if partion E: will contain system image(s) can I boot from usb recovery disk and choose restore from one of system images located on E:
3. If for some reasons I want to reinstall OS from set of recovery DVD(s) to factory setting what is going to happen with partion E:
4. what is purpuse of D: marked as recovery?
Just to state first and foremost, this is not an issue I have. This is a preventative post for anyone that may ask down the line. (as I've seen it asked on multiple other forums.)
I had this issue with an inspiron 1720 I just got. It had an issue, so I installed vista from a Vista RTM disk. It didn't fix the problem in the end, so I sent it into dell and got fixed, but I wanted to a fresh restore from the restore partition because on restarts, I'd get the blue screen of Death. Fun stuff right?
Well, Unknowingly, when I installed vista off of the cd, that removed the ctrl+F11 option from the dell. This is stated on many forums, and it seems that most answers to this issue is to format and install a fresh install from cd again, or call dell and get recovery disks. I figured "Heck, If I still have the restore partition, there is not reason why I can't get it to restore with some effort."
Some other people I've seen have just had viral attacks, or just want to sell their laptop and need a fresh install. This is for those people that need it. The answer to the question of what if Control and F11 don't work.
So, Here I am with the fix. There is one required bit of software that's required, and that is simply a dos boot cd. You can find many iso's for dos on the net. All you have to do is burn a copy and boot from it. [EDIT] IMPORTANT: I was wrong about dos. As stated below ( http://www.notebookforums.com/post3049150.html ) you have to do it from a 32 bit environment. You can get through one in the XP repair console (on the install cd) or through one of the options in vista's setup.[/EDIT]
Ok, so this is going to be dumbed down a bit, and I'll explain what the dos commands do. First off, after booting into dos, you need to change to the restore partition. This isn't hard at all, all you do is type "D:" and press enter. After this, you need to find the restore file. This is a file with the extension of *.wim. This is an image of windows from dell factory.
Generally this file is found in d:dellimage and is called Factory.wim. Just to double check, I'm going to tell you to change the directory. Type in "cd dellimage" and press enter. In dos, CD means Change Directory (or enter a folder). Now, to list all of the files in the directory type in "dir" and press enter...............
I lost the restore partition on the original SSD that my Yoga 13 shipped with. Is there a collection of drivers and whatnot that would allow me to restore it to factory defaults on my own with a fresh windows installation? I have the win8 key from the BIOS but don't want to lose out on all the required drivers if I were to just reinstall windows myself.
View 1 Replies View RelatedI just received my first laptop, a Vostro 1510 from Dell. The specs are in my sig.
I have a few newbie questions:
1) What is the best way to store a battery, and at what percentage should I store it? Or can I leave it in while using the AC Adapter.
2) I can take out the battery, and run the laptop via the AC adapter right?
I own a vostro1510 with a 8400m gs. i am a casual gamer and during gaming gpu goes upto 85c. i am worried about my gpu as we all know about the failure rate of 8400 and 8600. my warranty is going to expire on sep 15 so do you guys recommend me going for extended warranty? i find it a bit costly.
remember my laptop was purchased on sep 15 2008 and my mobo was replaced few months back(not due to failing gpu). someone also told me that the replacement gpu's are not defective is it so?
i have vostro 1510 laptop. and it's have 4gb RAM. with vista 32-bit, it shows that i have 4gb ram, but it's not tru, see in picture.
[url]
[url]
i install vista 64-bit, but when i insert vostro notebook cd, i see that driver support only vista 32-bit, no drivers for vista 64-bit.
in that way, i can connect internet, because in network and sharing center-->>manage network device there was blan page, no local area connectiom, no wireless, nothing..
i that case i must back to vista 32-bit and search solvation for this problem vist 64-bit windows.
i wanna use my 4gb ram and connect to internet.
I received this dell laptop on 3rd of march 2009 and ever since I got this laptop, my life has been a living hell. I've written about my problems before:
Vostro 1510 - touchpad/keyboard problems
Basically, I've wasted plenty of time chatting with dell representatives and they have already replaced my touchpad (twice), heat sink, fan, motherboard, keyboard in such a short span.
I've tried switching to different operating systems and it hasn't helped me in any way. Now, when I try to contact dell representatives, they tell me that its not a hardware problem since the hardware has already been replaced and so they just give me the same software solutions (reinstall os, reinstall drivers) as before without even listening to my problems. One time this representative even cut off the line. Now what I want to ask is : can i return this laptop now ? I know that my 21 day period is over but my work is really suffering right now because of this laptop.
Can someone upload the Vostro 1510 CDs that come with the laptop with drivers and such?
View 9 Replies View RelatedI have a Dell Vostro 1510 laptop and its fan is making funny noises. so I decided to open it up and clean the cpu fan,
View 5 Replies View RelatedWhat differences are there? They both support the same cpus, same gpus and probaly ram.
View 10 Replies View RelatedI recently installed Windows 7 on my Vostro 1510. Audio works great but the internal mic does not seem to work or be detected in Windows 7.
How can I fix it or/and reinstall the drivers?
I've had a Vostro 1510 laptop since February 2009, when I turn it on it makes clicking noises then it will eventually quit but today while reading a lengthly article online.
My clock's second hand will move 5 seconds then click, 5 more seconds then click and so on and so on but today the laptop was making a similar sound .....
I'm looking to buy another AC adapter for my vostro 1510, one that can just stay at home plugged into the wall for when im at my desk
The AC adapter that came with the laptop was a 90W PA-10 model adapter
would it make any difference if i bought the 60W version?- again, this charger will only be to have the laptop plugged into a wall outlet at home at my desk
I was wondering if it would be at all possible to add the fingerprint reader after purchasing the laptop?
I have the laptop in my sig and it doesnt have the fingerprint reader, and i now have a need for it
I have managed to find the following on ebay:
http://cgi.ebay.co.uk/DELL-0j448c-J448C-VOSTRO-1510-PALMREST-MOUSEPAD-F182_W0QQitemZ380130791881QQcmdZViewItemQQptZUK_Computing_ComputerComponents_KeyboardsMice?hash=item58818f91c9&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1690|240%3A1318|301%3A0|293%3A3|294%3A50
I received a new Dell Vostro 1510 a few weeks ago and have to say although the lid looks nice it's a major fingerprint magnet. What kind of an electronics cleaner can I use and what should I use to apply the cleaner directly to the lid with to help keep the lid clean and free of my fingerprints?
Also what should I use to help keep the LCD monitor clean? I certainly won't use Windex and a paper towel. MY monitor is the anti-glare entry level monitor which works great for web surfing and email but not so great for watching DVD's or online videos. It's too late now but if I had to reconfigure the laptop again which other monitor choice should I have selected for better viewing quality?
I have a vostro 1510
When i want to clear the bios password , i take it blank (dont enter any password)...and save it.
When i restart labtop i see again the password box , but i cant access my computer becuse it dos not accept my password and blank password......
please somebody give me the matsh..a uj-875s driver for windows vista 32 bit
View 5 Replies View RelatedI've been experiencing a BSOD most of the times after a Sleep. That is: when I close the lip and reopen when Windows goes to Sleep automatically under Balanced Power State
Using Windows Vista 32-bit with SP1.
I have tried x64 which has the same problem.
