I've been trying to find these cards for a while.. I've been searching for "dell FX3500", "FX3500", "FX3500M", same for the others, etc.
I can't find these cards for my 9400.. There's a lot of 7900Gs, but that's the card I already have!
Are there specific codes for those parts? I know the 7900GS is DG008, but I don't know of any for the cards I want.
Even with Crysis winning the latest "Hog of the Year" award, it does have a decent GPU benchmark tool.
Please post any benches you've accomplished using the Crysis GPU Benchmark. I will post additional FX2500 OC numbers as time permits.
I also have a FX3500 inbound, so I'll update my post with that data as well once installed.
FX2500 [169.04 NBF MobileForce Drivers, All Medium Settings, No AA]
1024x768, Stock Clocks (500/600)
Min/Avg/Max
17.86/31.79/46.45
1024x768, OC 550/650
18.14/33.71/50.28
1440x900, Stock Clocks
11.51/21.41/31.68
1440x900, 550/650
12.55/23.46/34.22
1920x1200, Stock Clocks
8.48/14.37/20.93
1920x1200, 550/650
7.91/15.27/22.14
I have just installed a fx2500 in my M90 and was wondering if I flash it with the Fx3500 bios would it become a fx3500? It seems from the specs that the only difference is the core/memory speed.
View 12 Replies View RelatedI don't know if anyone here has noticed, but there have been a crapload of FX3500s going for around $150 recently. There are still a few up for auction. You just need to look under "fx3500" when you search. Sure, they are used, but they are stated to be in working condition.
I was going to get one myself, but it would be an incremental upgrade from my 2500, and I didn't think the hassle of buying one and installing it would be worth rolling the dice for a slightly higher OC. Plus, the guy has good feedback, but nobody had given feedback for these particular cards last time I checked. This is important because the guy can't seem to get his part numbers right. From the information I have, the CG129 and YF209 (both of which are given in the description) are the FX2500 and 7900 GS, respectively. I would want to be sure I was actually getting a 3500.
Well I bought a FX-2500, actually 2, the first had to go back - Dud.
I understand that the FX-2500 and 7900GTX are the same cards, with a different BIOS.
So is there any benfits to flashing the FX-2500 with the 7900GTX BIOS, I am a Gamer, so again my Understanding is the 7900GTX is more orientated for Gaming.
So i can OC the video card slightly.
Can anyone plz help me?
I can't get ati tool to run in vista64, so would really help me if i knew where the realistic ceiling lies
View 15 Replies View RelatedDell :: According to Nvidia webiste 7900GTX & 7950GTX are NOT the same with different clocks ...
View 15 Replies View RelatedMy puter got messed up and I booted my delta OC'd card into Shitsta for 2 hours. and then decided to go back to XP.
my card died.
I still have a fx2500m but am lookin @ a fx3500.
Is the fx3500m HDCP compliant like the GTX?
Just got a FX2500 installed in my 1705 and my 3dmark 05 score went from 59xx to 8546 and that's still running stock speeds, cant wait to see what it gets once I push up the clock rate some.
BTW anyone who's on the fence about doing this, its was a very easy install took all of about 20 minutes to do and is a very solid upgrade for the money. Got mine off ebay for $140!
I went to upgrade my M90 (currently FX1500) to a FX2500 card, but I think the new card is DOA. What happened was when I installed it and rebooted it showed what looked like blue vertical stitching across the “Windows XP loading” screen, and then it was blank at the login screen. Also I noticed it was hot when I took it out, when it was only in for 2-3 min.
I have a 7 day return on this E-bay purchase but don’t want to waste time in returning it if it’s just a driver issue.
<O></O>
Is it dead?
im thinking about buying a blu ray driver for the studio xps from ebay and replacing it with the one i have now. would that be an easy thing to do?
View 5 Replies View RelatedAre the FX series cards a direct plug and play card in the E1705/9400 laptop or is a BIOS mod required ?
Seems these cards are selling alot cheaper than the 7900 series cards on Ebay.
I recently bought a 7900gtx and a new power brick when my 7900gs crapped out in my e1705. My question:
Can I use the same version of the nvflash iso disc that i previously burned to overclock my new 7900gtx? If so do i use the clocks with the "V" in the code
So here we go :
1) I'm ordering in a FX2500 to replace my 7800 go. I'm currently using Extreme-G Mobileforce driver 92.91 (I've tried some of the newer versions but prefer this one). Will this driver be compatible with the FX2500?
2) What are the best drivers for the FX2500 if not Mobileforce?
3) Overclocking... I've read the posts about flashing the 7900GTX bios to enable overclocking, does this mean i cannot overclock using the normal software way. In the Mobileforce drivers for the 7800, the option is in the Advanced Settings options in Windows. Does the FX2500/7950GTX not have this option and is BIOS flashing the only way to overclock the card?
4) If the BIOS flash is to enable voltage adjustments as well as clock adjustments, is this something I need to do or will the card do well with just altered clock speeds?
Will changing the voltage on the 7900gtx to 1.32v make any difference?
I noticed a few people here and there have done this.
what would be the benefit?
would it be more stable? or be able to clock higher?
but on the card is said revision A01. In the BIOS, the Video BIOS version is 005.071.022.028.002.000. I wasn't aware they're made 2 revisions of the 7900GTX, is this card still safe to flash with the modified BIOS here?
View 15 Replies View RelatedI've been watching for a studio remote for a while on eBay (they only seem to every have the older grey style available) and I see there's a guy on there selling a bunch of them new for $19 shipped free.
Use microsoft cashback for 14% off, or it looks like he takes offers.
I guess Dell dumped a bunch of them now that the 1555 can't use a remote.
http://cgi.ebay.com/ws/eBayISAPI.dll...m=180347424369
So I see lots of refurb'd Studio XPS 16s on ebay at very competitive prices (like a couple of hundred $ off dell.com).
The ones I am looking at includ warranty transferred to buyer - seller has 100% (or near) feedback.
There is someone selling a Quadro FX 2500m for 450$, I thought these things went for about 150. And for the 450 bucks for a 7950 GTX, I could buy a 8800 GTX for my desktop.
Maybe the supply will increase to drive the prices down, although I don't know where they would be getting the equipment.
Just recently upgraded my E1705 with a FX-2500
Flashed the unlocked BIOS with the 1.24 v GPU 500 -1200 clocks
3DMark06 came back @ 5180
Just wondering how this matches up with others here with a simular setup.
Having installed a 7900gtx in my Inspiron 9400, I let Windows Vista download a Microsoft compatibility driver for the card as a temporary measure until I got round to trying out other drivers. I've since tried Nvidia's driver from their website which didn't recognise the hardware; the Dell driver (from the M170 driver section) and the Xtreme-G 163.69 and 162.62 drivers, all of which slowed down the graphics performance of the Aero effects and some caused flickering.
I did not use any special software to remove the drivers - just basic install/uninstall. I've rolled back to the Microsoft driver which works fine within Windows and runs games fine at low settings.
I now have an additional problem in that Corel Paintshop won't start due to a "Driver components mismatch."
What should I do? Has anyone else experienced performance loss with "better" drivers? or could that be down to the presence of the Microsoft driver?
How do I get this thing working with the wonderful performance I should have?
After trying many drivers and having many questions left unanswered, I decided I wanted to try this route to see how it goes.
I was told when I bought my FX2500m that I could flash it with the 7900GTX BIOS since they are both the same card basically.
I'm having problems where I can play some games no problem, and others lock-up after only seconds of play, sifting through 5 drivers (NBF and Xtreme-G) I decided either I have a faulty card or maybe the FX2500m doesn't have a shader or whatever that some of the games I'm testing it with need.
I only have a couple more days to report this card as a DoA so I'm wanting to test all the possibilities before (possibly) shipping it back.
Long story short, can someone give me a link to a 7900GTX BIOS? And give me a quick run-down on how to go about actually doing the flash and backing up my own?
Im writing this so that others who are curious about these types of cards can decide if the upgrade is right for them. This installation required me opening the laptop and breaking off a small piece of plastic, which was very easy. I also updated the system BIOS to A09 and acquired the 130 W PSU as this baby draws about 45W of power itself compared to the 20 the GS requires.
When I originally bought the GS I knew it was a good card. It still is. I got this card because I felt the upgrade would be more cost effective then rebuilding my old desktop PC. All I can say is that where the GTX shines is where the GS shows its weak spots. The GTX can really handle higher resolutions really well as well as keep the frame rate fairly smooth.
For my temps, since I AS5'd it, runs at about 45 idle and 75 peak which is fairly good considering all thats going on.
The biggest jump was in STALKER which quite honestly the GS really had trouble with. Im happy to report the GTX can max out this engine fairly well with little to no choppiness.
Well shoot, what are we waiting for lets see some pics and results.
7900GS specs
7900GTX specs
Bioshock- All Mazed out- no Vsync- 1920x1200 20-30FPS
Gears of War- All Maxed out- No Vsync- 20-30FPS
Stalker- All Maxed out- 1600x1200- Smooth 30-45FPS
In conclusion, the GTX stomps all over the GS in higher resolutions and with the extra clock and memory speed it can easily outperform the GS in almost every aspect. It should be noted these are stock speeds and OC'ing would result in hopefully even better performance.
After reading a ton about upgrading my e1705 to a 7900GTX (actually, an FX2500M), I went ahead and bought one on eBay. To my horror, the card doesn't fit.
I snapped off the little plastic parts that keep the left heatpipe from fitting; that isn't the problem. The problem is that Dell seems to have modified the motherboard to prevent such installations (my e1705 is a fairly recent one). At the top portion of the video card, there's a connector that matches a connector on the motherboard underneath. That motherboard connector is too high, which prevents the video card from inserting into its PCI Express socket. In addition, the videocard post on the upper right (where the screw would insert into the thread) is missing. That part isn't so important, but that damn connector definitely is.
1) Has anyone seen this before, on a newer model e1705?
2) The connector appears to be soldered on, so I'm not sure I could remove it even if I wanted to. Does anyone know if I *can* remove it, and if so, how? What is this connector used for? I assume it's some sort of SLI connector, since it has a matching one on the videocard itself?
Pictures will be provided upon request. I'm pretty bummed, as it appears I'm screwed. I'm also steamed at Dell, which has evidently modified their motherboards to prevent cheapskate upgrading.
what is the best (best performance/most stable) driver out there for a FX2500m? Haven't heard much mention of the XTreme-G drivers on these forums, so I was just curious.
I found the thread here...
[url]
and the website here...
[url]
and the quote here...
Quote:
Originally Posted by TurbodTalon
MY OPINION ON DRIVERS: I have tried a dozen different drivers from stock to Laptopvideo2go to Geforce Tony's Extreme Drivers. All have given me roughly the same performance--and that's if they even worked. In other words, no one driver blew the others out of the water. What am I saying? Find a driver you like, and stick with it. There is no such thing as a 'Super Driver' at this point.
But my thead still stands, between those tested, what do you think?
I'll edit this first post with updates so people won't have to sift through this thread to see all my information..............
I can play Obilivion, Bioshock, UT3, and even crysis (1200x800 medium) at good frame rates with good quality visuals turned on. I had previously just accepted that I was stuck with games like doom3 and quake4 only.
View 9 Replies View Relatedso today I took the plunge of buying a 9 cell battery for my m1530 in ebay it was a 7200mah/85mWH. I was wondering if anyone bought this battery here before and if its any good?
i looked at genuine dell batteries and its out of my budget...and my 6 cell can only hold an hour of charge after 1 and a Half year of use.
I see a lot of chargers but they don't include the power cable. Seems there are a few chargers that say they're genuine for about $30.
View 5 Replies View RelatedI'm considering buying the Sony Vaio Z online at Amazon or Ebay. New.
If the seller has like 1000+
positive reps and is like a star-seller. Would you consider the purchase safe? I'm a newbie when it comes to amazon/ebay