Dell :: G.Skill Titan SSD Not Recognized In Studio XPS 16
Feb 13, 2009
I just got my 1640 and stuck in my G.Skill (who puts a "." in their name?) booted up and the BIOS says no HDD installed. I removed and reinstalled the drive, no love. Then I just removed all the screws, letting it hang, and it recognizes the drive. Reinstalled with screws, no love. Let it hang again, it recognizes it. At this point I suspect the housing is warping it causing problems, but even with a single screw very loose, it doesn't recognize the drive as being installed.
So I either suspect warping or some kind of electrical short, and based on the "loose screw" test mentioned above, probably electrical short. The original drive, a Seagate Momentus 320GB 7200RPM worked fine. Also, the G.Skill worked fine, all fastened in, in my Macbook.
Soooo...any ideas? I'm planning on trying some kind of insulated mount, but I'm not sure what I need to do that. Nylon screws? Maybe Fry's has some.
Disclaimer: I know the 1640 has an option for a sweet Samsung 256GB SSD now for cheaper than the G.Skill, but it wasn't an option when I ordered.
View 9 Replies
ADVERTISEMENT
Jan 29, 2009
Just got it and installed it - still playing around.
Steps to installation - existing HD WD 320GB 7200 (a truely good and silent drive)
New SSD - G.Skill 256GB SSD
1.Sell one small offspring to come up with the cash.
2.I cleaned up my HD - took all the stuff I did not use out
3.CCleaned it
4.Did the last defrag I should ever do
5.Installed the SSD in my Roswill USB case and connected to my M1330
6.Initialized the drive
7.Formated the drive
8.Downloaded the latest build of Acronis 2009
9.Cloned the HD to the SSD
10.Booted up quickly with no issues.
Works great. Boots fast.Everything "pops".
I will miss little Bobby but he kept touching my stuff.
By the way 8 months and no Nvidia issues.
View 9 Replies
View Related
Feb 2, 2009
Has anyone bought the following G.Skill RAM, PC2-6400 DDR2 800MHz, 5-5-5-15? [url]
I want to know if the RAM would be recognized as 5-5-5-15 with my FW190 CTO. I bought OCZ RAM which is supposed to have 5-5-5-15 but CPU-Z reports 5-5-5-18. So, OCZ will need to be shipped back.
View 5 Replies
View Related
Jan 24, 2009
I have a new Studio 15 with firewire port. I just purchased a new camcorder to transfer DV tapes to DVD.
I got the camera specifically because it was supported by vista. But the laptop doesnt recognize the camera. Ive done a good bit of research and it seems to be a vista problem.
Ive tried all the solutions i could find on the net. Even modifying the registry per the instruction from microsoft support .....
View 6 Replies
View Related
Sep 16, 2008
Tried a G.Skill 4GB module in the M1330 this evening.
It is not recognized in slot A or B. This was tested with BIOS A08 and A12. This unit was purchased in March 2008.
It's a no go for this model it seems.
View 10 Replies
View Related
Feb 21, 2013
When I boot up my PC it comes to a screen expressing that the battery is critically low and the AC Adapter cannot charge properly, press F1 twice to continue.
The computer continues to boot up fine, but is running strictly off AC power. It boots up the same with or without the battery locked in. I even bought a used, but guaranteed functional battery and it had the same result.
After researching a lot online I saw a common solution is to update the Bios. Currently my system has Bios A01, and I have tried updating to A07, A11, and even A00 without luck. When running the executable in Windows 7, just before it flashes the system with a new bios I get fail message saying operation cannot complete because AC Adapter and battery must be present and functional.
So I found a guide online to create an MS-DOS startup boot drive, along with the Bios .exe's which can be run from MS-DOS. The system booted up into MS-DOS mode fine, but I received an error running the .exe, "Cannot run in DOS mode". I also tried to run the .exe with the /forceit command afterwards with no luck.
So at this point I don't know if my laptop simply needs a BIOS update, or if I have a faulty motherboard or battery sensor.
Ideally I'd like a solution to upgrade the bios without a battery that works and can resolve my problem. But if we can't find a solution, I need to know what needs to be fixed so I can repair my laptop through Dell's Out of Warranty Repair service.
View 3 Replies
View Related
Oct 22, 2012
My studio 1737 laptop always says its plugged in and not charging. I had the original battery in and on boot up the bios says that the battery is not recognized if I unplug the laptop with that battery in it automatically dies. I also purchased another battery online I get the same error on boot but this battery actually has a charge straight out of the box so the laptop will run if I unplug it. However, the battery will not charge. I also bought a new official dell charger since the after market one gives me an error on boot up. I have also replaced the CMOS battery because I was getting an error on that too and the clock kept resetting.
I currently have the new battery, new official dell charger, and a new CMOS battery installed and the battery still does not charge. What could be causing this?
View 10 Replies
View Related
Mar 5, 2013
I can't get in contact via web/email to Dell as my service tag doesn't get recognised on the wesbite, and the auto detect doesn't work
I have a Studio 1555 laptop and want to add bluetooth to it
I have found this:
[URL]...
and this:
[URL]....
Model numbers 0P560G and 0M960G
Which one I need and whereabouts I need to check inside the laptop to see if I have the slot available? I am capable of doing this sort of stuff as I have built my own PC, just don't normally do anything to laptops (other than install an illuminated keyboard in this)
Will it work if I just add the module and install the driver?
View 4 Replies
View Related
Jun 17, 2009
i can get so windows xp will recognize the 128gb ssd hard drive on a fresh install.........
View 3 Replies
View Related
Jan 8, 2009
ok so i hv this problem with my dell xps m1330 that it wont charge the battery. and when i turn the laptop on, it gives me message that tht AC adapter can not be recognized, and that the battery may not charge.
i tried reinstalling windows but it still didnt help :S. so i called Dell technical support and talked to this guy for 40 mins, he told me a bunch of stuff , like reseting stuff in BIOS etc. but it didnt work. so at the end he just said to send the laptop for repair.
Even though i still have the manufacturing warranty, but i CANT send my laptop in for repair, bc i really NEED it for my university. And also he wont agree to send me a replacement laptop or anything.
so i really dont know what to do. i know there are alot of experts here, who are way better than dell technical support team. so does any one has an easy way out for this problem
View 7 Replies
View Related
Jan 21, 2009
just did a fresh installation of Windows XP and all the drivers, but under the device manager, the ICH8 USB controller is not recognized, so I can't use any USB device attached to the computer.
View 3 Replies
View Related
Mar 21, 2008
I just recieved a PA-13.. My comp gives me an odd dos screen saying it dosent recognize the power adapter... Is there something i have to do to make it recognize..? or should it be automatically recognized..?
I have a 9400 and i was planning on putting a fx-2500 vid card in tonight... Whats wrong here..?
View 11 Replies
View Related
Jan 17, 2015
Recently ran into an issue with the AC adapter not being recognized despite being the original cord and no longer charging the battery. No issues with light on cord flickering or turning off. Purchased a new power cord anyways but problem persists. BIOS shows unknown type for Ac adapter even after BIOS update. Diagnostics scan doesn't detect any problems. URL....
why this occurs and if there is a workaround or repair to re-enable the charging? It appears the laptop is just disabling the charging circuit despite being provided the correct power.
View 2 Replies
View Related
Jul 20, 2009
I have a DELL XPS 1530 Laptop, a few days back my 90W AC adapter stopped working and beeped continuously and the green light also didnt turn on. I gave the adaptor to a local electronic shop to get it repaired .
After getting it repaired I plugged it to the laptop and it charged normally upto 48% and after that the battery did not charge. Then on reboot a message is being display that "
The Adapter wattage is not recognised please connect a 65W DELL adaptor"
View 6 Replies
View Related
Sep 29, 2009
I have this "problem" (is not actually a problem but I would like to know what the problem is) I have a usb wireless adapter since my laptop didn't come with a wireless card built in.
Its working fine but there is something that bothers me, I have 3 usb ports and one of them doesn't recognize my usb wireless adapter!
I don't have problems with the other two, I just plug it in and the system connects to the internet. Its just one usb port that does not recognize it.
View 5 Replies
View Related
Nov 30, 2008
After installing XP media center on my inspiron 1520 i am unable to get it to recognize usb devices. I looked in the device manger at the drivers and it is missing some for the usb. I am not sure which one to download. I tried installing some and they did not work. I went to dell's site and did not find anything.
View 10 Replies
View Related
Oct 17, 2009
That is the problem, I have 2 GB in my computer but when I go to My computer then properties it shows me only 1.99GB, is it bad, good, normal?
View 6 Replies
View Related
Sep 6, 2007
I put a brand new seagate 160GB SATA hard drive in my E1705. Before doing anything, the F2 bios screen displayed 160GB, but after installing windows vista ultimate, it is shown as 78GB in disk management, F2 bios screen, and everywhere else. This is a 7200rpm drive. Is there any hardware limit I wasn't aware of? What should I do regain the other 82GB?
View 13 Replies
View Related
Nov 16, 2014
I have three usb ports, and none of them seem to be working. Although the devices work on my roommate's laptop, they are not recognized on mine. When I plug my flashdrive into hers, it lights up, but that doesn't happen on mine. I recently reset my computer to factory settings to try and fix other issues including the problem with the usb ports, but the usb devices are still not recognized.
I recently sent in my laptop due to problems of it not being able to turn on, and my battery and a/c adapter were replaced. I was quite happy. However, I do not want to send it back in even though it is under warranty. Since I am a college student, I really need my laptop. If nothing works, I'll send it back in over winter break so I'm not without a laptop during my studies.
My touchscreen is also not working, so how to fix that, here is my other post: [URL] ...
View 1 Replies
View Related
Feb 27, 2013
recently I bought MS Industrial wifi mice. When I plug adapter to usb port on my Inspiron 5520 it says "Device not recognized" . Then I put it to another port ( I have 4) it says the same message. I plugged it to first port again, and it works.
When I put laptop to sleep or when I shut it down and when I wake/turn it on my mice doesn't work . I plug adapter out, and plug in again, the same message .... "device not recognized"
View 8 Replies
View Related
Feb 28, 2013
I have a inspiron 15 laptop and keep getting a message "USB not recognized. The USB device attached to this device has stopped working or windows doesn't recognized.." thing is there isn't a device attached to the computer when I get these messages.I've updated the BIOS, driver updates etc and still get the message.
View 1 Replies
View Related
May 14, 2013
My laptop is plugged in and not charging. I have run a bios and it says that the battery is a non dell battery (even though i have not tampered with the computer at all). I have only had the computer for 5 months. If the battery failed after 2 years yeah that might be acceptable but only 5 months?!?!?! I now cannot use it without plugging it in.
View 4 Replies
View Related
Jul 11, 2009
I have the Inspiron 1525 which I upgraded to 2GB of ram (not much but runs smoother then the original 1GB I had). As for the 1 problem formatting will not fix it's the AC Adapter which it will not recognize.
It's the original that it came with aand it runs with the battery pulled but will not Recognize the adapter and thus charge the battery. Will that problem get fixed if I ever get it formatted? .....
View 6 Replies
View Related
Mar 31, 2009
Hoperfully somebody can help me out, I am completely out of ideas.
I have an E1705 and am running Vista Home Premium. There are two issues and are most likely related.
1) My internal xD card reader keeps asking me to format a card even though nothing is inserted in there, and to be quite honest I can't even remember the last time I used an xD card.
I have tried uninstalling the device/driver and reinstalling using the most recent as well as even older drivers with no luck ....
View 8 Replies
View Related
Mar 11, 2009
I installed 2 - 1GB RAM chips into my 8600 but it only recognized 1 GB of RAM memory.
Anyone know how to fix the problem?
View 5 Replies
View Related
Mar 24, 2009
Wondering if anyone else is having this problem with Dell.
I bought an Inspiron 1500 14 months ago. Early on I noted that the adapter dell sent would sometimes slip out if the laptop was touched.
Then at 6 moths I started getting a message on power up -AC adapter wattage & type cannot be determined.- 2 weeks later the battery was drained and the system wouldn't recharge it .....
View 5 Replies
View Related
May 27, 2009
Simple...Installed Windows 7, everything was working fine...till today when the dvd drive isn't recognized by windows. Nothing in my computer..
I can insert/eject a disc only during the boot sequence.
View 7 Replies
View Related
Nov 19, 2014
We are having a serious problem with the battery that we replaced for one of the Dell laptops. The Laptop model is Dell Latitude `E5530. We were getting a message that the Battery has to be replaced and we bought this battery from one of the third party vendors.
It ran for 2 weeks and now it comes up with some weird messages. The laptop isn't detecting the battery at all. We had sent the battery back to the vendor but he says the battery works fine at their end.
View 3 Replies
View Related
Mar 4, 2013
I have a Dell 1545 Inspiron Computer with Vista Ultimate OS. Yesterday for the 2nd time, my mouse and printer won't work because I get the error message USB Device not recognized.
About 3 weeks ago I had the same problem and it self-corrected itself when the latest Windows Update apparently fixed it.
I know there is nothing truly wrong with the USB devices but am not sure what to do. If there is a particular driver for this as my backup DVD for this computer has lots of them listed. I am currently running a System Check but am not sure if that is going to work.
View 7 Replies
View Related
Jan 28, 2015
All of the sudden the battery stopped charging and the official dell AC Adapter, that shipped with the laptop, is listed as Unknown in the BIOS. I understand this happens because somewhere on the way the info from the pin that (for no good reason) identifies the AC adapter does not reach the charging circuit. This is supposed to be a safety mechanism (that no other manufacturer uses) that is obviously just an attack on off-brand chargers .The laptop is working fine (except for charging) as long as the AC adapter is connected.
What I did so far:
notice I'm out of warranty
try different power outlets
try different AC adapter
Check battery health (it's fine)
replace Power Jack
Voodoo
View 2 Replies
View Related
