I have the latest Bios update and the laptop seems to suffer from wanting to boot properly on 1st attempt. Sometimes it will take up to 10 tries before it boots up.
Symptoms: Dell logs goes half and the machine freezes, sometimes it will just be stuck on the logo and not boot at all.
A brand new laptop with this problem is REALLY frustrating. I guess I have to log a call with them to get them to fix it?
I have a dell lattitude e6320 that i just got and im totally locked out of the laptop after one use and a screen comes up saying something about dell sercure manger and asks for a palssword and after u get it wrong 3 times tje laptop shuts down ....
View 4 Replies View RelatedI have been running in to an issue lately with a Latitude E5540 laptop.
The specs are:
Intel i5 cpu @ 1.9 ghz
4 gb RAM
x32 Windows 7
In my device manager it says that I have an unknown device and there is the warning symbol next to it. When I go to update the drivers it says that it can't find any drivers (I am connected to the Internet). I looked at the hardware ID and noticed that it was APCISMO8810, I then proceeded to research the driver, which I found was the ST Microelectronics Free Fall Sensor Driver. I also know what it's primary function is.
The issue I keep running in to is that I have uninstalled the driver, and tried to re-install the driver from the Dell downloads. However halfway through the process the install wizard tells me that the most recently updated driver from dells site is older than the driver I currently have installed. (even though it says there is no driver installed)
I regularly find that, with a single keystroke, my brand new Dell Latitude e5540 laptop randommly produces 2 spaces (most often) and double letters (sommewhat less often than the doubled spaces, but consistently and predictably). The faster I type, the more oftenn the errors occur... I have found it to be an issue of how hard I strike the keys. The keys controlled by my dominant right hand are most often affected whereas those controlled by my pinkie fingers NEVER have been affected.
I amm only one of many employees at my place of work who all are experiencing the same problemm. I have asked repeatedly for Dell to let me know the extent of this problem and whether they have a recall of this model (which, as far as I can tell, is pervasive with this particular mmodel). My persistent questions have never been answered by Dell, despite numerous contacts with 3 different agents.
P.S. If you notice double letters where there should be single letters or extra spaces in this e-mail and this post scrippt, please read on for the reasonn: I am using the brand new Dell Latitude e5540 computer our school system recently purchased to write this e-mail. I have simmply givven up editing my typing... you're getting the spontaneous errors caused by this computer so you can see for yourself and hopefully to motivate Dell to fix the problemm soonner, rather than latter.
IMPORTANTLY, if you are having similar problems with YOUR BRAND NEW Dell Latitude e5540 laptop you specifically will NOT have tthese problems if you use an external keyboard... it only occurs with the laptop's built in keyboard) PLEASE send me your servvice tag (S/N) nummber from the bottom of your Delll LLatitude e5540 computer and I will include your commputer in my conntact with Delll about this problem. (It is a problemm of this particular model... I have never experiennced this before with any other computer).
Dell Latitude E5540 keyboard and touchpad freeze. Sometimes when pressing Enter the keyboard and touchpad freeze but the laptop keep processing, so I need to restart my notebook to have the keyboard back....
Specs:
8GB DDR3
500GB HDD
Windows 7 Pro x64, even with the preinstalled Ubonto have the same issue.
I have a Dell E5540 laptop and the touchpad is working fine, except that it won't zoom or rotate. All other gestures work as they should - scrolling, three finger-gestures, ...: no problem. But no zooming or rotating.
Both options are of course enabled in the Dell Touchpad settings. I have removed the touchpad from the device manager and reinstalled it with the most recent drivers, but to no avail.
I think it's a software problem since scrolling with two fingers works without a problem?
I have had the following computer for a few days after purchasing from the Dell online store, Latitude E5540. The WiFi was having trouble connecting anywhere except close to my router, but recently the laptop is saying that a driver or hardware problem is detected in the Intel Dual Band Wireless-Ac 7260, and that Windows has stopped the device due to a problem (Code 43). The drivers are up to date, and connecting using an ethernet cable and checking for new updates tell me the drivers are up to date.
View 1 Replies View RelatedI receive System Disabled with code 96552764 after 3 failed attempts.
View 2 Replies View RelatedI know this is an oldie but it was one of the best DELL ever made.
I suspect it,s the hard drive ,but when i push start it goes to the blue screen with writing on it for a split second then goes to black and shows
safe mode ,safe mode with networking ,safe mode with command prompt , start normally, start in the last working condition
My Hp mini 1000 boots up to a screen asking for the current password after three attempts it says password check failed Fatal Error...... System halted.
View 9 Replies View RelatedIt won't boot and shows only lines across the black screen or blurs when HDD is plugged in.
When i remove HDD (any HDD, i've tried three so far), laptop boots to BIOS.
I have a Dell Latitude d630 computer. Everytime i turn the power button to turn on a blue screen will suddenly pop up. It will not bring the dell loading screen up and will not bring up the option to "start windows normal". I have had the battery replaced wih a new one. I might think its the memory card or the screen itself. what to do next or at least on how to get the loading screen up would be great. And sometimes when i can press ctrl, alt and delete at the same time the screen will disappear and come back with the blue screen. And after sitting their with the blue screen after a while the "wifi" light will light up as well with the "blue tooth" light.
View 4 Replies View RelatedWe image all our new systems in our organizations on SCCM. I've got one that is a puzzler. I will not get an ip from the server. Instead it displays the message "PXE-E51:No DHCP or proxyDHCP offers were received." No other computer has this issue. I does not get as far as the network boot so it is not a windows deployment service issue. And it senses if the cable is disconnected, and gives you a different PXE error. I have flashed the BIOS, no sucess. I RMA'd the motherboard, and no difference. Dell won't replace the whole system since it was a replacement for another DOA. I thought it might be that little daughter card that contains the NIC connection, but cannot see that listed on the dispatch site as a seperate part.
View 2 Replies View RelatedWhen I press the start button on my Latitude c600, 2 green lights light up on the right side for power and hard drive, as well as the 3 lights for the keyboard. The lights stay lit for about 5 seconds then go out.
However, that is with the external power connected.
With just the battery, it lights just as above, but then blinks off and then on again for another 5 seconds. Wash rince repeat.
Additional information:
I removed the hard drive weeks ago to use in another system and I don't know if laptops fail to boot if there is no hard drive detected.
Before you ask, I tried reseating the memory.
Although I have worked for years on desktop computers, I have never dismantled or provided support for a laptop.
Also, I cannected an external LCD but that means nothing untill it boots.
I bought a refurbished laptop from a distributor on ebay, who I discovered doesn't know the true meaning of refurbished. But to make the long story short, after I installed a new CMOS battery,
and purchased 2 new laptop batteries because the dead CMOS killed 2 other batteries, I now discovered the laptop will not boot up using just battery power with a full 100% charge.
When I press the power button, the battery LED's light up like it was charging the battery. It's 3 green 1 amber, and it dos this about 4 times before stopping. None of the lock lights, light up (just threw that in there in case it is relevent).
I have a Dell 4310 that I bought used without a hard drive. When I unboxed and initially tested it with another drive it booted into Windows 7, but, did not load because it wasn't the right drive.
The computer sat next to my chair for a few days until I got the new SSD drive that I wanted to install. When I put the drive in and plugged the system in (no battery yet) the battery light on the upper left flashed briefly and the power button came on and stayed that way for about twenty seconds. The screen remained black and the battery light and power button turned off.
This morning my son mentioned that he "might' have spilled a little bit of something on it. I quickly took it apart and carefully dried the pieces and parts on the heating vent and put it back together and the same thing happened.
I have tried the following:
1) Re seat RAM
2) verified video is connected
3) unplugged, held the power button for fifteen seconds and plugged the power cord back in.
What could I be looking at here, a new Motherboard?
I was given a nice E6510 that doesn't boot. I've taken it apart and tested the memory, all the connections, reseated the processor (yes I used arctic silver) and it never gets past the 'one time boot menu', the diagnostic boot freezes but I CAN get to the very complex BIOS version A16.
So, I bought a new MOBO thinking that would solve the boot issue but it hasn't-it's doing exactly the same thing. may indicate the problem-Dell calls this an "OPTION ROM", may be 'unseated' or the system board is bad.
What is "Option ROM" and how can it be reseated? Are there any other things I can do in BIOS to change this? I also replaced the SATA CDROM and the hard drive, and I know the USB port works okay but nothing will boot from them.
My D600 will not boot up unless the power cord is plugged in. Is there some switch that I hit by mistake? Can this be corrected?
I guess basically it doesn't work on the battery unless it is plugged in but the power shows 100 % for the battery
I have a new dell latitude 6510 notebook and now i will install Windows 7 Pro 32 Bit again. When selected "Boot List Option" under bios settings i see legacy and uefi but i can´t "Add Boot Options" - Warning "File System not Found". Windows 7 Pro 32 Bit is installed and working under legacy but not working on uefi. When uefi selcted windows 7 pro 32 Bit is installed and when installation is finish can´t find bootable device.
View 2 Replies View RelatedI have an issue with my Latitude D400 laptop which has now occurred twice. Basically, after operating normally and shutting down properly it has stopped booting. After the POST screen it simply hangs at a black screen with a flashing cursor in the top left corner.
Using the recovery console to repair the MBR and boot sector on the HDD has no effect. Neither does a repair installation of Windows XP Pro. The first time it happened I backed up, wiped the disc and started with a fresh installation of XP Pro.
However, it's now happened again. The hard disc is completely undamaged (all files are intact) but will not boot at all.
I am having some real issues with a Latitude E5420. It will sometimes boot no problem, maybe 40% of the time.
Most of the time it goes to the dell splash screen and the bar goes to the top then i get a blank screen. No blinking cursor or anything. No HD activity, no CD drive activity.
I can press F2 and get in to the bios, i can press F12 and get to the boot menu but even after selecting a boot option from the boot menu i will still get a blank screen most of the time.
Once the Laptop boots up it runs fine and doesn't report any errors. A memory test has shown no errors. I have replaces the CMOS battery, which was a bit of a nightmare, i have replaced/swapped the memory modules.
I own a Dell Latitude E5510. I *love* this laptop.
However, today I started having a problem with it. The laptop turned off suddenly. When I went to turn it back on, it began to load as usual with the following things on the screen:
1. the circular logo in the center of the screen.
2. the "press f12 for boot menu" thing in the top right corner.
3. the blue loading bar beneath the circular logo in the center.
What happens is the blue bar fills up, but then the screen goes black. It doesn't just instantly go black though. It starts from the top of the screen and moves to the bottom. It does the same thing when I press f12 to get into the boot menu.
I own a Dell Latitude E5530, which I bought used off eBay, and it was wiped to protect previous owner information, however, the owner did not reinstall Windows. I am getting the "C Prompt" as pictured below, and I would like to know how to reinstall Windows.
How to reinstall Windows with this popping up after BIOS?
In the past we've restrict the boot options on our laptops vis bios sequence to prevent unauthorised reimaging of machines. However I've just noticed our newest Latitude e6230 still list all the devices as available despite these settings. Screenshots attached.
Bios configuration:
Laptop manual boot:
I have an E5430 that when the power button is pressed will not post every time. It is random. I get the power light only. Holding the power button down until it clicks off and pressing it again on the sixth or 19th time it will finally light off and post and head into boot. I have run the full diagnostics and no problems are found. The diagnostic finds no problems so I am wondering if this is a power button problem or something not tied to the MB. The same thing occurs with different batteries and power adapters.
View 1 Replies View RelatedI'm attempting to enable BitLocker on a Latitude E7440 running Windows 8.1. The system is in UEFI mode with Secure Boot enabled, so I'd like to use Secure Boot for integrity validation. I have the appropriate GPO set, but if I try to enable the TPM protector, I get the following warning event in the BitLocker-API management event log:
BitLocker cannot use Secure Boot for integrity because the expected TCG Log entry for variable 'SecureBoot' is missing or invalid.
This is immediately followed by:
BitLocker determined that the TCG log is invalid for use of Secure Boot. The filtered TCG log for PCR[7] is included in this event.
The system therefore ends up configured with a regular platform validation profile instead of using Secure Boot. Is this a problem with the firmware on the Atmel TPM on the system, or is it something else?
I have a Latitude laptop as described above and for some reason it isn't detecting the SSD Drive.
It states: No Boot Device Found, press any key to reboot
I read on the Dell support website the laptop may need setting up in maintenance mode?
However after pressing alt+f at the Dell logo nothing happens it just tries to boot.
I recently converted from a Lenovo X220 to a the Dell Latitude XT3. The XT3 is a better laptop minus a couple design choices. That said, there is one feature in particular that I will miss the most....My old X220 fingerprint reader allowed me to swipe with the latop powered down. This action would boot up the PC and log me in. This doesn't seem to work the same on the XT3. Instead, I must power it up then swipe in two separate steps.
Is there a way to get the XT3 to respond to a finger swipe while it is powered down?
When I try turning it on the caps lock light blinks 10 times. It doesn't even show the bios screen anymore What could be wrong?
View 5 Replies View RelatedWhen I boot my laptop the screen stays blank. You here the start up but screen still black as if not started. The blue symbol on F4 key lights up a 9 in a lock!! How I can get the screen to work?
View 16 Replies View Related