I'm having trouble finding out what is wrong with my computer. When I power it on, nothing happens, the LEDs just cycle through as if it is going to power on, but then it just powers down. (Power led stays on).
But, when i hold the FN key, and try to click the power button, i get some flashing lights.
from left to right i get
(Flashing) (Solid) (Solid)
I do not know what happened to ACER TW , but looks that their FTP, was loaded with the most fresh software versions, at list for the older generations of the laptops , other than the very fresh.
I find out that there was one updated version for the eRecovery 1.3.3.9, that many laptops still use, as it is part of the erecovery hidden partition software - utilities.
No were in earth you can find a download about the eRecovery 1.3.3.9.
Or worst ... not possible to find the eRecovery 1.3.9.2.zip as the ACER TW server has close down.
So ... now its my turn to ask for some real help about finding this file.
If some one haves it, i do need a copy.
And no matter what, i must find it.
Last know source about this file, its this link.
[url]
I have a z500 laptop. In the parts lookup when I enter my S/n it says :Error : Could not retrieve parts information for ...
But in the [URL] ..... I have no problem and it recognizes my S/n .....
anyone got dell mystery uk code? i need a 15%+
they got up to 50% and are availible on vostros ....
Basically the hard drive (of my XPS m1530) has been going a bit slower than usual recently.
I figured it was just Vista been more sluggish than usual.
So I decided I'd back it up, wipe it and install my new copy of Windows 7 RTM.
After booting from the DVD, setup stopped halfway through giving me this '0x00000e9' error code.
I subsequently ran the dell diagnostics.
Which gave me this :
Hard Drive - DST
Test Results : Fail
Error code 2000-0142
Msg : hard drive 1 - Self test unsuccessful.
Status : 70
OS: Windows XP SP3
I had two 512MB 2Rx16 PC2-5300S-55-12 sticks of ram in my laptop.
I purchased 2 x 2GB 200PIN DDR2 SODIMM 256MX64 sticks to install.
When i put in the new sticks I get 2 short beeps and it doesn't finish booting the the OS.
Am I doing something wrong? I know that the OS will only recognize 3Gb but it should at least boot right?
Also after the post check this pops up:
The amount of system memory has changed.
If you did not change your memory...
To resolve this issue, try to reseat the memory
I have a Studio 1737 with Bluetooth connection. I have used it in the past to send data between PC and phone. Now it is not working.
Device manager says devcie cannot start code 10
Reinstalling drivers tell me to turn on the device using FN+F2 or radio on/off switch.
My XPS 12 Duo touch screen stopped working one day.
My Device Manager shows that the I2C HID Device is not working (With a status of: This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE
I'm not sure why as nothing changed... that I know of.
I have uninstalled and reinstalled the drivers, I have made sure all drivers are up dated (as on dell.com), and eventually I even formatted the HDD thinking some update must have caused this.
Unfortunately I have had no luck.
Just to add, Dell replaced my screen (due to ghost images) about a month ago - I'm thinking this could be the cause.
I am having a major issue with my Dell XPS L702x laptop at the moment, in that it cannot boot up at all, rendering it completely unusable.
When this first happened, the laptop used to progress through the dell screen, the 'starting windows' screen, and then just hang at a blank screen, or with a blank screen with the windows 7 background and a mouse cursor. This happened in both normal startup and attempting safe mode.
I have tried starting in best last known configuration, resetting the bios to default settings. I eventually got startup repair to work, but it didn't do anything, nor did system restore.
I run diagnostics, and receive this error right at the beginning of the test:
ERROR CODE 0146.
Msg: Error Code 2000-0146
Msg: Hard Drive 0 - self test log contains previous error(s).
I continue the diagnostics and everything else passes okay.
However, now when I try to boot my PC up in normal or in safe mode, I get past the dell and windows startup screen and instead of the hang I simply get a blue screen error:
BAD_SYSTEM_CONFIG_INFO.
STOP: 0x00000074
I have also had the blue screen errors c000021a, and 0xc0000221. But primarily am now getting the bad_system_config_info every time.
Have fan problem. Has run intermittently.
Doing diagnostic using Fn and power up screen gave err msg 2000-8010.
BIOS is 2.5.2 Revised. What is this error?
Fan on Inspiron 1520 not coming on. Diagnostics gave error code "3700:011B". Took fan out (it wasn't even dirty) and jumpered red & black wires (p.s. don't know what yellow wire is for) to a 5 volt dc power source - fan worked fine. Put laptop all back together - fan still not coming on...
View 3 Replies View RelatedI'm no computer genius but I'm no 'dummy' either. I tried like heck to resolve this problem but just cannot figure it out. I called Dell cust svc but they want $49 to talk to INDIA! ugh.
I need a response from someone who at least "writes" English! Bought my mom a notebook a few years ago and it was just fine until recently when my niece
tried to get on and got the Administrator's login box (blank screen underneath) - nothing before it except the Windows logo with the little boxes blinking across. No matter what we do, it won't allow a bypass ......
Just got a new E6400 and even before VISTA had fully loaded 1st time, it had bluescreened and showed a minidump with errorcode 9F = DRIVER_POWER_STATE_FAILURE.
Error occurs very often when going to sleep mode, and sometimes when doing reboot or shutdown.
Computer then hangs for 5-10-15 minutes before rebooting and showing the VISTA error report. Now, 2 days after 1st power on, I've had probably 10 BSOD's during sleep / restart / poweroff operations .....
my cousins inspiron recently stopped working.
doesn't load the bios. the alternate boot gives the following code:
Flashing Num Lock, ON Caps Lock, OFF SCRN Lock
Getting an 8 beep, beep code error, but can't seem to find the beep code table for this specific Dell that identifies that many beeps.Already removed and replaced the RAM, they looked fine.
View 3 Replies View RelatedI have an Inspiron 1505 about five years old. Lately my computer has been freezing and shutting down for no reason. I can be just reading and it'll freeze. This isn't the first time it has been happening. Back in April I had the same problem. The error message indicated that my hard drive was going bad so it was replaced. Now it's doing it again. This time I got error code M1004. From what I read, this is something about heating. What I have noticed is that the bottom of my laptop runs extremely hot. Will getting a cooling pad?
View 4 Replies View RelatedPXE-E53: No boot filename received.The client received at least one valid DHCP/BOOTP offer, but does not have a boot filename to download. There are several possible causes:
• The 060 DHCP option is not set during installation, on Windows Server 2008 with the DHCP service, is installed locally. To resolve this issue, modify the following PXE configuration option if DHCP service is required to be installed locally: Open the PXE Configuration Utility, select the PXE Server tab, and for DHCP Server discovery select the No DHCP server installed on PXE server (Use DHCP port) option.
• The DHCP Server and the PXE Server were located on the same server, but one of them was moved to a different server. This would result in an incorrect PXE Server configuration. To resolve this issue, reinstall the PXE Server component of the Altiris Deployment Solution.
• The DHCP relay agent, either a Proxy DHCP Server or a switch configured with helper addresses, is not configured correctly. For example, if DHCP and PXE are on separate servers, the DHCP relay agent needs to have both addresses in its configuration. To resolve this issue, correct the DHCP relay agent configuration.
• If the Microsoft DHCP service is installed on the PXE server, but is disabled or unconfigured, Altiris PXE Setup configures PXE to work with the local DHCP service (even if the DHCP service is disabled). This causes the PXE server to not respond to PXE clients that get a DHCP address from DHCP services running elsewhere on the network. To resolve this issue, remove Microsoft DHCP services from the PXE server and reinstall the PXE Server component of the Altiris Deployment Solution.
• A firewall or network security software is enabled in the network environment.
my laptop inspiron1545 is slow it cant download some updates that are needed the errors are code80246007 and code 800B0100
View 6 Replies View RelatedI have a Dell Inspiron Mini 10 laptop and today I have switched it on and got these codes:
STOP: c000021a [Fatal Error]
0xc0000135 (0x00000000 0x00000000) The system has been shut down
Is there any way I can fix this? the problem is that I can't log on past the codes to download anything so its hard to do it from the laptop.
Is there a way to get past the codes.
I have a Dell Inspiron 13z. When I turn it on it says recovery that the PC could not start properly. Error code 0xc0000001
View 1 Replies View RelatedXP - Latitude D610 laptop
Uninstalling and re-installing Drivers DOES NOT WORK.
I recently went to turn on my computer, Dell's Inspiron M5010, today and was surprised to hear it beeping. After I got out from behind cover, i logged onto another computer in the house. Counting 7 short beeps, I have come to learn that there must be an issue with with either the processor or the motherboard. This is the point where I am at currently. I would like to know the next step to take from this point, whether buying a simple new part would do the trick, or if it is time to turn it into a scrap heap and get something new. I suppose there could be some further testing whether it is either the processor or the motherboard with the issue.
View 15 Replies View RelatedThis morning the fan on my XPS13 L322x came on and now won't turn off.
I ran the diagnostics and the fan test failed;
Error Code = 2000-0511, Validation 100696
During the test I noted these temps
CPU = 44
Ambient = 44
Chipset = 66
I'm running Ubuntu and have BIOS A06 currently.
I am reporting with the same issue where my motherboard was replaced for 7 beep code and still the issue didn't get resolved. Issue Reoccurred again--again i am getting 7 beep codes. When I checked the motherboard part no and it is the same motherboard which have replaced for this issue. As I informed earlier that the motherboard which was installed for the INSPIRON M5010 have bump cracks around the solder on AMD chip resulting in no post with 7 beep code. The onsite tech replaced the motherboard and it was working fine for 2 weeks and again I am getting the 7 beep code. I am dell customer for past one decade and I owned so many Inspiron and xps laptop but this laptop is giving me trouble. If I get HDD error or any other part failure I would say yes it is due to usage and I would pay for the parts but if I get issue due to manufacture defects than dell should find solution to fix it. How come I am getting same issue even after part replacement within 2 weeks? I would request you to take required action to come out with solution. I am ok with refurbished motherboard but it should not be the same Class or type of part as it is resulting into same 7 beep code. There are 2 types of motherboard in M501R---AMD(tm) RS880M/SB820. And I got my laptop replaced with the same part RS880M which has known issue. My computer <edited for TOU violation> . I believe dell should fix this issue for me as it is known issue with these models.
View 5 Replies View RelatedI have Dell Studio 1558 laptop, when i switch ON it is not booting.. i can hear the sound of fan & the Drive but i cant see anything on the screen, sometimes it will boot up but it will work for only 10 mins then the screen will go off & will never come ON again.
When i ran the Diagnostics by pressing F12 during startup i got an error message
**LDC -LCD connection Test**
----
Error Code 0321
Msg: Error Code 2000-0321
Msg:LCD EDID - unable to access EDID EEPROM
I am an owner of a dell inspiron n5040 and im having the error code 2000-0142 on my laptop,
I was wondering if it was possible for someone to check out what problem causes my laptop to not work properly.
I have a Dell Inspiron 15R laptop that is 2 weeks out of warranty, and have only owned this laptop for 1 year from new. On Jan. 1 2015 i started my new year with a 2000-0142 code as i started up my computer, so i could skype my family and friends wishing them a happy new year. After doing some serious investigating with family, friends and the internet i found that this is a common problem with Dell's Hard Drive's and they seem to do nothing to rectify this issue...
View 1 Replies View RelatedSerious problem with my laptop (dell N5110)
I set up an password on bios system and I forget it, I tried many times to unlock it but I couldn't,,, I could start the laptop normally and log in to my window but when I hit F2 a window appear and ask me for system password or administrator to log to bois
Is there a master code to unlock it …
My laptop model is: Dell Inspiron N5110
Im looking for a Sony Vaio for my girlfriend and after googling for a while I found out that FW series looks beautiful while still cheap.
But it seems they have thoudsand different FW notebooks and I can't figure out those numbers like 390, 590 or 380... mean.
I have just sold my laptop so I do the searching on my tiny iPhone which make it a nightmare to dig deep into those stuff
I'm currently using my laptop for 2 months and today when I shut down my Dell Inspiron 15 a while ago and open it again after an hour I continuously get this error
Your PC ran into Problem and it needs to restart. We're just collecting some error info, and then we'll restart for you.
If you'd like to know more you can search online later for this error. 0xc000021a
After it automatically restart it says: RECOVERY .... Your PC couldn't start properly
After multiple tries, the operating system on your pc failed to start, so it needs to be repaired Error code: 0xc0000001
You'll need to use the recovery tools on your installation media. If you don't have an installation media (like a disc or USB devices), contact your system administrator or PC manufacturer.