My pc is HP 15-r012tx Notebook PC ......do i need to install that software? (Qualcomm Atheros QCA9000 Series Bluetooth 4.0+HS Driver for Microsoft Windows 8.1)
View 5 Repliesmy notebook is HP 15-r012tx Notebook
i can't conect to the wifi....when i press the connect battom for the wifi then it's gone...........and i can't install that softower {Qualcomm Atheros QCA9000 Series Bluetooth 4.0+HS Driver for Microsoft Windows 8.1} when i go to instoll that softower...it's show me like that (the device may not be present or could have been ejected/unplugged from the systeminsert or reinsert now)
After putting the power on, nothing happen. It gives some kind of blue background. But it's not the critical error blue screen. It's some kind of windows-bitmap.
Using Esc and F2 I could do a System Test. The Short DST (don't know what that means...) says: FAILED.....
It gives details on the FAILURE ID : 64SP28-5HB7AC-XD003F-60VF03.... What should I do next?
The notebook is a HP, model DV6-3160SD, Running W7 on it. Don't know the bit-version (and can not check it).....
How do I get this to install ? All the other updates were installed on the same day with out a problem.
I have tried some fixes posted on the MS site and none have worked so far.
I have a z710 with OEM win 8.1 installed.
I've a brand new Dell lattitude 5530 with a Dell wireless 380 Bluetooth Card. I've downloded the driver module recommended by the Dell driver support webpage when I supplied my Sevice Tag. (DW380 Software release Customer installer Version 6.5.1.2410 ). However the module failed to install. The last few lines of the log file are:
[03/27/13 14:26:10] (MUPXMLParser::GetResultName): *** Vendor Return Code is not found in Mup.xml[03/27/13 14:26:10] Name of Exit Code: [03/27/13 14:26:10] (DupAPI::GetReturnCode): *** Unable to find DUP value for: [03/27/13 14:26:10] Exit Code set to: 1 (0x1)[03/27/13 14:26:10] Result: FAILURE
What I need to do to get this one to install?
I'm not able to install Intel Management Engine Interface (MEI) Driver. During Installation a message pops up saying, "The setup failed to install one or more drivers." I downloaded the latest version of the above software but still didn't work. I'm using Windows 7 Ultimate 64bit.
View 7 Replies View RelatedI purchased HP 15 r014tx windows 8.1 pre installed I want to downgrade to windows 7 but I can't install in it. method to install it . If any one has the same laptop and install windows 7
View 7 Replies View RelatedI bought a pair of blueooth headsets and i want to use them with my HP 15 notebook PC. but i need a bluetooth driver.
View 5 Replies View RelatedMy pc (G72 laptop) screen failed to unlock...despite using right password.It' showing ; user profile login failed!
View 4 Replies View RelatedI have recently purchased HP 15-d009TU Notebook PC. It came with DOS installed. I have installed Windows 7 64 bit OS. I have downloaded the drivers listed in Drivers & Download section in HP.com but most of these drivers (Intel chipset driver, Graphics driver, Audio driver, etc.) do not work. While trying to install, most of them says that it does not meet minimum system requirements although all the system requirements mentioned in the requirements list are present.
Now, I am unable to use even the USB ports in my laptop.
the wireless driver provided just won't install to my notebook.
The hardware IDs of the network controller are:
PCIVEN_1814&DEV-3290&SUBSYS_18EC103C&REV_00
PCIVEN_1814&DEV-3290&SUBSYS_18EC103C
PCIVEN_1814&DEV-3290&CC_028000
PCIVEN_1814&DEV-3290&CC_0280
I have Win7 64bit.
I have this HP envy 17 j000eb notebook with Windows 8 that I really would like to get rid of.
I managed to install Windows 7 on it, but it doesn't recognise some hardware.
Luckily audio and video works as well as the touchpad and DVD-rom, but I don't have any of network adapters installed, nor USB, and I still cannot find any drivers for them.
It shows a dozen of pieces of hardware needed to be installed.
I replaced hard drive with SSD and installed windows 7 ultimate (X64) on my HP Pavilion G4 notebook. However, I am not able to install switchable graphics on my laptop now.
I have tried this
1. Installed HPSA and ran update and tuneup. It asked me to update "AMD High-Definition Graphics Driver" but it failed with multiple retries and after some time now it doesnt ask to do this update at all. Now everything is green in HPSA but I am still not able to switch the graphics
2. Tried to download from HP drivers page but it says "AMD Catalyst Mobility cannot be downloaded due to incompatible harware/software on your computer"
3. Tried uninstalling the driver but windows updates the drivers automatically.
4. I also updated BIOS as suggested at [URL] ..... but still no luck......
Product Name: HP Pavilion g4 Notebook PC
Operating System: Windows 7 Ultimate 64-bit Service Pack 1
Product number : LQ375PA#AB
I got my laptop but did not do a clean install. I just removed all the bloatware I could think of. Is there a guide to do just that though, get rid of all the stuff that shouldn't be there so that you essentially have a clean install without all the bloat or footprints of it?
View 9 Replies View RelatedI can't install my integrated webcam. After downloading the driver and opening the file installation starts and then suddenly it just ends with the message there was an error during installing.
So the thing I've done are: installing the drivers, which failed.
I've also looked in the device managemer app but could find anything of a camera.
I will try to make this short and understandable......
I bought a XPS M1330 iwth Vista Home Premium Bios A07 in January 2008.
April 2008 I tried to install updates and it messed up my Microsoft Office 2007 so I got it back working and did not mess with anymore updates.
Around June 2008 I started having the notorious battery issues. The battery ran down while I was on it and the battery has never worked since. At first it said connected,
but not charging but then it eventually died while I was trying to fix the problem and now it says battery not detected and it says the ac adapter is not recognized (I have the original AC adapter sent with the computer) .....
I have had an aspire 5920g for about 18 months now and it was all working fine until I updated the graphic drivers, but the drivers stopped installing halfway through and now I can't install any graphic drivers.
I tried to install my original drivers and they won't install. The system keeps freezing and I think thats the problem.
I've tried making a recovery disc but erecovery won't recognize blank DVD's and acer 'support' are only too happy to grab you by your feet, turn you upside down and let all your money fall out so they can charge you for a reovery disc - absolutely ridiculous - instead of actually trying to help me.
And also for some reason a yellow triangle appeared next to the ACEYTS4Y IDE controller a week after I got it but up until now didn't seem to cause any problems.
Did the HD test and it failed, begins to boot but goes to black screen w/ cursor. What I was told when I called HP and from what I reasearched myself you can't just pop another HD in without encountering problems and even another dead HD. Is it the software in the laptop or are some HDs not compatible? Is there an HD that I can use without having issues? The old HD is a Samsung HM 121 Hl 120GB 5400 SATA-150.
View 6 Replies View RelatedI swear it is always something with this product. I made a bootable USB flash drive and put Windows 7 on it. I have 2 M1330's, the only difference between them is CPU/RAM/HDD. One of them boots just fine off the USB drive, the other doesn't. They are both running the A15 BIOS. What am I missing here? I've compared the BIOS settings side by side and they are identical.
View 6 Replies View RelatedAre all Nvidia GPU's designed to fail?
All my systems in my sig have replaced GPU's in a less than a year.
Is this what I get for trying to get a performance GPU's?
Kind of ennoying because I hate the tech's to come to my place and rape my system - I'm not saying all techs do, but I only had one guy who was really careful w/ my system when he was replacing parts. Others just didn't give a damn, which even lead to replacing my M1330.
I caught him when some plastic part from mobo flew off my system, and when he closed the system up, the system refused to boot up lol.
my XPS gen 1 w/ ATI still runs okay at my mom's place.
I've noticed since installed windows 7 and even before my reformatted and was on vista that my XPS1530 was having some major slow downs.
I can still game, etc but sometimes when extracting files the entire system will stop, no browsing or music. Even when openning mp3 files it can do this like as if the entire drive is loading.
Then today I thought of the WD dianostic tools and it failed! It said: Cable Test::Write sector error. Anyone know what that could mean? Broken cable? If so what can I replace it with?
I have a Dell XPS M1730 with 8800 GTX SLI still in warranty that broke down. The reason : error code 43 aka one of the video cards is burned. That is what the guys at the service told me right now.
I have been reading the forums here and saw that many of you guys have the same problem and got the option for a replacement, more exactly , Alienware.
My situation is this , my laptop has been in service for more than 2 weeks and today i got an e-mail saying one of the video cards is broken and that they ordered a new one from DELL and its due to arrive in 7 -10 days. They did not ask me anything if i agree or not.
What i read is that this laptop is not in production anymore and so is the 8800 gtx card cause of bad engineer manufacturing ....
SOME UPDATES COULD NOT BE INSTALLED
The following updates were not installed:
Microsoft .NET Framework 1.1 Service Pack 1 Security Update for Windows 2000,
Windows XP, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2 (KB953297)
Last week, I think it was last week, I did some Windows updates. Restarted. Came up with Windows Failed To Start.
So then yesterday I was uninstalling some games that I haven't played in awhile. Defraged after that. Restarted my computer. And it happened again Windows Failed To Start. Put my windows cd in. Got into Windows. After everything was loaded, I decided to restart again. Never uninstalled anything or deleted anything this time. Restarted.
i juse upgraded my sr46gd's bios,and it failed.....
i need to use it tomorrow,is there any way i can do it? i mean re-flash the bios
i have a sony vaio vgn-ns290j laptop and i was told I needed to do a bios update..well i downloaded the bios driver from the sony website..started doing the update..and mid way through the laptop blue screened. Now when I go to turn it on it gets power but does not post..Is there a way I can reset it back to the default..?? why does sony offer a driver that bricks your motherboard?
View 7 Replies View RelatedI've got a DV6000 here that seems to have some sort of motherboard or HDD problem.
I load up an XP Pro installation and everything seems to work fine until it gets to "Setup is now loading Windows" at which point the installation just hangs. Native SATA is turned off. Tried it twice, too.
I've tried the installation with a Windows 7 Beta DVD as well, and the installation also hangs shortly after Windows finishes loading its files. I tried Windows 7 with native SATA turned on and off.
I'm not 100% sure that the HDD is ok as I don't have anything with which to test it, but the installation will get past this point in my E6400.
I'm not that familiar with HP computers, so I'm wondering if I'm missing something obvious or if there's a hardware problem.
You know how you're supposed to be able to change the brightness with fn + up/down keys? Well its not working.
Tried reinstalling the video driver and bios.
About a week ago, I had my motherboard replaced due to overheating.
Yesterday, before I had a chance to shut it down properly, I removed the AC power from the laptop and the laptop immediately powered off. I tried again, and the same thing happened.
I called Dell and asked for a warranty replacement and after determining that the battery had indeed failed, the XPS tech support rep told me that the battery is only covered for one year as it's a consumable and they offer a separate battery warranty, so she could not replace it.
So I explained to her that they did not offer that option when I purchased my system (as far as I recall) and I understand the cells wear out and don't hold a charge as they do when they are new, but, regardless, for the battery to completely fail is a defect and should be covered for the length of the system's limited warranty .....
So I tried updating my BIOS to version A14, the current one on Dell's site. Running Windows 7 Ultimate 64, btw. It seemed to update fine, but when it restarted, I got a black screen.
I waited about 20 minutes, powered off, then back on. It booted into Windows, now however my keyboard does not work. Most keys do not work, and the ones that do produce incorrect characters.
Also, whenever I restart Windows, it does not reboot. It will hang at a black screen until I power off and back on. Currently typing this on a USB keyboard.
When I go into setup, it does say version A14, so I'm assuming it went through, but for some reason is not compatible with my system. Can I downgrade to fix this, and if so, where can I find an older BIOS version?