Dell :: Windows Failed To Start Once Again
Jan 4, 2009
Last week, I think it was last week, I did some Windows updates. Restarted. Came up with Windows Failed To Start.
So then yesterday I was uninstalling some games that I haven't played in awhile. Defraged after that. Restarted my computer. And it happened again Windows Failed To Start. Put my windows cd in. Got into Windows. After everything was loaded, I decided to restart again. Never uninstalled anything or deleted anything this time. Restarted.
View 9 Replies
ADVERTISEMENT
Jan 29, 2013
We have a Dell Laptop N7010 on windows 7 (bought Oct 2010) that started freezing up and is now giving the "Windows failed to Start" message. We have tried the two options:
Launch Startup Repair (recommended) and Start Windows Normally. Have tried to select each but no luck. The Startup Repair takes awhile but nothing happens and we are right back to this screen. Then, in reading other logs with this problem the suggestion was to run a diagnostics check.So, chose F12 and ran the Preboot System Assessment Build 4124 and then the Boot Diagnostic Utility Partition
The following errors appear:
Error Code 0F00:65D
Msg: Disk - DST Self-test Read Error
& also get
Error Code 0F00:133C
Msg: Disk - No suitable disk media is present
(This one was related to SATA DVD + RW...)
I then tried to select F8 to set the system back to factory settings but do not get anywhere. It seems the only options are F2 or F12.
View 5 Replies
View Related
Jan 16, 2013
I turn on the laptop Inspiron 1545 and keep getting an error message that says, "WINDOWS BOOT MANAGER... Windows failed to start.... Then to gives me 3 steps but when I click F8 nothing happens!!! I insert the cd and it takes forever to do a diagnostic check.
View 9 Replies
View Related
Jan 29, 2013
The hard drive went bad on my Inspiron M5030. I had made system recovery DVDs (Win7) when I first got it, so I replaced the hard drive and restored the system from the DVDs to the new hard drive. All went great, and Win 7 worked perfectly until I shut the system down (restarts work fine). After a shutdown, and upon startup, I get this error:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
Insert your Windows installation disc and restart your computer.
Choose your language settings, and then click "Next."
Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
I have tried going in the bios and the system sees the new hard drive. I also tried all the Dell diagnostics (F12), and all passed, including the hard drive.
There is no option to "Repair" once I boot from the Recovery DVDs, only to restore the system completely, which I've done twice now with the same results.
It seems that the lack of a recovery partition on the new hard drive might be to blame? I don't know. I'm out of options at this point.
View 6 Replies
View Related
Jul 28, 2013
I've got this on my HP G6 2053ef, and I've got an error message stating that "an error ocurred while attempting to read the boot configuration data" and also File: BootBCD Status: 0xc000000f
View 7 Replies
View Related
Oct 14, 2008
I've got a problem with the laptop Lenovo T410s. I've put the new HDD on it (tried even the same with a different HDD too), and started to instal WIN 7 64-bit from the recovery disks. I used to do it many times so far with different Lenovo laptops without any problems. But this time, a while before the end of the instalation (when processing the sdrivebackup.wim) it stops and comes with a statement: " the recovery process has been finished, please ...." (but I see that the progres bar is far awayfrom 100%) , and finishes the instalation, reboot the computer and it comes the screen with the statement from the Windows Boot Manager:
"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem (...)
File: Windowssystem32winload.exe
Status: 0xc000000f
Info: The selected entrycould not be loaded because the application is missing or corrupt"
I read a lot about the ways to solve similar problems, but they don't work on my case. The strange thing is, that I can instal WIN 8 or WIN7 from regular Windows instalation disks (not from Lenovo recovery, but from normal universal Windows instalation disks).
As I told before, I tried it in 2 different HDD disks with the same effect. It looks that the recovery instalation stops before the end without instaling some files which are missing later during starting the system.
View 9 Replies
View Related
Nov 4, 2014
I have a hp pavilion g7, operating with windows 7As of this evening, my laptop is failing to start up and freezes on the 'starting up' page display. After doing several of the recommended options, I ran the start up test which has failed.
The display screen reads-Memory test: passedSmart check: passedShort dst: failedFailure id: GU6E00-63479L-MFPX01-60TP03Product id: A7A44UANBAHard disk 1Start up test: failed
View 1 Replies
View Related
May 24, 2013
I'm currently using my laptop for 2 months and today when I shut down my Dell Inspiron 15 a while ago and open it again after an hour I continuously get this error
Your PC ran into Problem and it needs to restart. We're just collecting some error info, and then we'll restart for you.
If you'd like to know more you can search online later for this error. 0xc000021a
After it automatically restart it says: RECOVERY .... Your PC couldn't start properly
After multiple tries, the operating system on your pc failed to start, so it needs to be repaired Error code: 0xc0000001
You'll need to use the recovery tools on your installation media. If you don't have an installation media (like a disc or USB devices), contact your system administrator or PC manufacturer.
View 15 Replies
View Related
May 7, 2010
I just got my new system, and wanted to remove the crapware before creating my recovery disks. I did that, then ran the Sony utility to create the recovery disks. I did not install anything.
One thing I uninstalled was SQL Server. I have no need of it.
Building the recovery froze at various stages of completion... 44%, 27%, 21%. I got an alert with the error, "Failed to start database service". I finally caught that error right away and dismissed -- then the system finished building the recovery disks.
Great -- now I have to wonder, are the recovery disks even valid?
Also, what database service does the system want, and what process wants it? I now get this error at arbitrary times. Sometimes on startup. Usually whenever I do anything with install/remove programs. So is this some new Windows 7 enhancement to the registry? Have I created a time bomb in my system by deleting SQL Server? If Windows 7 needs this, why did it let me delete it?
So far I wish I had a DOS machine. It's unfortunate that my work requires me to use Windows -- the OS treats me badly, and I can't use my new machine until I can predict whether the initial setup is valid.
View 3 Replies
View Related
Nov 28, 2014
After putting the power on, nothing happen. It gives some kind of blue background. But it's not the critical error blue screen. It's some kind of windows-bitmap.
Using Esc and F2 I could do a System Test. The Short DST (don't know what that means...) says: FAILED.....
It gives details on the FAILURE ID : 64SP28-5HB7AC-XD003F-60VF03.... What should I do next?
The notebook is a HP, model DV6-3160SD, Running W7 on it. Don't know the bit-version (and can not check it).....
View 5 Replies
View Related
Oct 16, 2009
SOME UPDATES COULD NOT BE INSTALLED
The following updates were not installed:
Microsoft .NET Framework 1.1 Service Pack 1 Security Update for Windows 2000,
Windows XP, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2 (KB953297)
View 7 Replies
View Related
Jan 2, 2015
My pc (G72 laptop) screen failed to unlock...despite using right password.It' showing ; user profile login failed!
View 4 Replies
View Related
Apr 1, 2013
I've had my Dell Inspiron 1545 for a couple of years and it ran fine until recently I noticed that I couldn't update ANYTHING, Itunes, adobe, java, AVG... ect. so when I looked into what could have cause this problem I noticed a lot of the windows updates had failed, so of course I reran the updates and turned my computer off when it directed me too and no luck they still failed I need this computer for school or at least long enough for me to buy a new one.
View 1 Replies
View Related
Dec 6, 2013
I have a new Inspiron 15 3521. I tried to update to Windows 8.1 several times. It downloads to 50% and then says Installing for a few seconds and then Getting PC Ready for a few seconds then it starts downloading again. Steps taken so far
1. I ran Windows Update and the Intel Storage Controller 7 Series Controller needed to be updated. The update failed.
2. I went to Dell's Driver Support site and it detected the same driver needed to be updated. I ran the update and it installed successfully. I restarted the PC. I ran the Dell driver update again just to be sure and it said it needed to be update. I tried it 3 times and every time it said success but it never updated.
3. Downloaded driver from Dell and tried to install from Device Manager. It said the driver was up to date.
I googled this and it appears to be a common problem but no solution was stated. Surely others are having this issue.
View 4 Replies
View Related
May 7, 2009
I was install new windows 7 x64, i have turn on AHCI, then when installation was finish and reboot windows start and freez, i only see black screen and white curosr.
When i turn off ahci i was fine, but i need ahci to turbo memory.
View 4 Replies
View Related
Dec 7, 2013
Windows 7 64bit on my T510 has died. When logging in, it hangs on the login screen forever. Windows recovery failed too. It ran for 8 hours and reported error (something like error in restoring a file and disk is full, though my C drive is half empty). After that all the Windows restoration points are gone. So I suppose I have to do factory reset.
My question is, I made two additional partitions on my hard drive using external tools, which store all of my data. So when I do factory reset, will these two partitions be overwritten? How I can recover the system while keeping all my data?
View 2 Replies
View Related
Sep 8, 2012
I get the "failed configuring windows updates reverting changes" message when i try to update my computer, how can i make sure that the updates go through?
View 9 Replies
View Related
Aug 29, 2013
My YOGA 11 S came with Windows 8.0. I upgraded to Windows 8.0 Pro W - Media Center without an issue a few weeks ago. Today I have twice attempted to install the WIN 8.1 Upgrade from the Store. Both attempts failed and rolled it back to WIN 8 pro. It's a stock machine, no mods at all.
View 9 Replies
View Related
May 18, 2009
1. cant trust windows for bios update
2. dont flash the bios unless told so by a qualified tech or acer
3. cant reflash/install orig bios via usb thumb drive
4. one option is to take back to acer and get slugged $$$ cos not covered
by warranty.
5. second option is to take bios chip out and have it reflashed.
6. third option is to buy a new bios chip.
7. fourth option i to buy a new motherboard
8. NEVER p!$$ off your gf/wife
View 4 Replies
View Related
Jan 16, 2015
i have an aspire one. AO725 is the model. my wireless internet driver went wacky when i updated to widows 8.1 and i re-installed the driver. a day later it is not connecting to the internet again.
View 1 Replies
View Related
May 21, 2014
I'm not able to install Intel Management Engine Interface (MEI) Driver. During Installation a message pops up saying, "The setup failed to install one or more drivers." I downloaded the latest version of the above software but still didn't work. I'm using Windows 7 Ultimate 64bit.
View 7 Replies
View Related
Jul 17, 2007
i've been aware of the bluetooth widcomm and the logitech software causes the moment where you'll get a black screen after the windows loading screen then you just need to restart the laptop to enter into windows.
i really think that this is the cause in my case because whenever i disabled the logitech webcam, i don't get any locked up, although when i enable it, then restart the machine, i don't usually get the locked up.
The weird part is that when i leaved the laptop at least for some few hours (note that i enabled the logitech webcam here), the issue arises, so i need to restart the laptop using the power button once to get inside windows.
My solution here is to disable the logitech webcam which i don't like because whenever i need the camera the laptop will ask me to restart the computer.
I would like to ask if there is any other solution for this? any new software?
i don't like to uninstall any software unless its really the solution.
View 15 Replies
View Related
Sep 30, 2012
I'm using Dell Studio 1555. I've use it around 3 years. Last week my laptop start making up problem.
Firstly it will suddenly restart while i'm using it. Sometimes it will come up blank screen and need me to restart back.
After that during start up my dell logo will take times to pop up. And will ask me to repair my window.
I've read some post here said that it maybe because of the CMOS battery and I've already change it and dell logo is pop up a little bist faster than before.
But right now my laptop could not be start up. When I power up, the LED button at the On/off button is ok.
The fan also running. When I plug in my Iphone it will be charge but there is nothing on the screen.
I've also put on external monitor but also didn't show anything.
And also there is no sound @ beep during my start up.
View 9 Replies
View Related
Feb 14, 2013
So i start up my dell today. Worked fine lastnight, no issues. At the dell screen(just the dell name, black screen) i see this pop up. "Start pxe over ipv4" so i wrote that down.
Then i get pxe-e18:server response time out. Great i think to myself. Next is : Start pxe over ipv6. After a bit i see Pxe-e16:no offer received.
Laptop is an inspiron 3520 running windows 8. Would like to know what this thing means, online searching hasnt worked.
View 15 Replies
View Related
Aug 11, 2009
My PC worked fine for the first few days and then all of a sudden about 1/2 the time I would try booting up I would get past the BIOS post screen and then would only see a blinking underscore cursor in the upper left and it wouldn't load Windows at all.
I've reinstalled Vista SP2 clean, tried a clean install of Win7 RTM (fully legal) and then Vista SP2 clean - all with the same result of 50% or thereabouts the PC not getting past the blinking cursor undersco
View 4 Replies
View Related
Oct 19, 2009
What does everyone think about starting a dedicated thread for the XPS 1640 (and 1645?) with Windows 7? ("Official 1640/1645 and Windows 7 Thread")
I think starting now, there will be a flurry of driver updates, behaviors, tips, questions, etc.,
and it seems it would benefit everyone to have all those in one place instead of having to search through a myriad of individual posts
View 10 Replies
View Related
Jan 14, 2014
who came across with slow start up and sleep issues in windows 8.1. ( Dell Inspiron 15-3537).I recently upgraded from windows 8 to 8.1. After installing all the drivers found that fast start up not working and laptop does not awake from "sleep" state.
Actually reinstalling the Intel Video driver solved the problem. When I was going to install video driver, it was said that a newer version is already installed. However neglected that and downgraded the video driver. that 8.1 is faster than 8.you install the latest driver given in dell website.
View 4 Replies
View Related
Jan 12, 2015
My Inspiron 5421 won't start. I can hear the drive start and after a few seconds I get a 4-beep code (RAM read/write failure). The warranty expired about 6 months ago.
View 3 Replies
View Related
Apr 28, 2013
My Dell Studio 1555 won't start anymore. When I want to turn it on, I get a beeping signal (2 beeps) and nothing happens. I tried all possible troubleshooting tips from the dell website (disconnecting all power and hold power button, reconnect to power, checked battery with the button on the battery, all fine, can't get into bios because computer doesn't start at all) but nothing works. Recently I also checked if the motherboard is connected properly and there is no issue either.
I also purchased a new dell adapter because my old one was a little bit damaged. The adapter is like the old one, and it's originally dell and the correct one for the studio 1555 so it can't be the adapter. Laptop also doesn't start when the battery is not in and it's only connected to the power.
View 2 Replies
View Related
May 19, 2014
I purchased a new Dell XPS 11 9P33 a few days ago and the Windows logo button located on the touch screen is randomly vibrating and switching to the Windows start menu in Windows 8.1. The Windows button will randomly vibrate and switch to the start menu even when no one is touching the laptop. It seems to start slow at first happening once every few minutes then it gets worse so that the Windows button is switching to the start menu rapidly several times in a row making the laptop unusable.
Rebooting the laptop doesn't seem to work, the issue comes right back in a few minutes. This happens when viewing the BIOS without being logged into Windows so it appears to be a hardware issue. The local computer store had another Dell XPS 11 in stock so I exchanged it for the other one but now the new XPS 11 has the exact same issue that the first XPS 11 had. It has BIOS version A00 installed which appears to be the latest BIOS version. It's a great laptop otherwise and I would love to keep it, is there any possibility this will be fixed in an upcoming BIOS update?
View 8 Replies
View Related
