I downloaded VLC as a movie viewer. I used to used Media Player, which I understand and was easy to make playlists. However, most times I start a downloaded movie it plays in QuickTime, which I hate. How can I make VLC my default movie player? I am using Safari.
View 4 Repliesway to import a .AVI file into the iTunes movie Library. I tried to drag and drop it, copy and paste, and it didn't work. Would there be an easier way to make an .AVI file into a .m4v, and then import it that way?
View 10 Replies View RelatedThe system default setting of the adjust plan brightness is DC 40% and AC 100%,
now when unplug it 40% on DC mode, then plug in AC, found LCD brightness have not change to 100%, still keep with 40%. Reboot one unit with 3 cycles on DC mode; also duplicate this phenomenon after plug in AC adapter.
(the default brightness on AC always change from 100% to 40% ) any one face this problem ?
I have recently bought a Dell Inspiron 17, 5000 series with a 17" monitor and am running Windows 8.1.On previous laptops that I have had, when I have pressed the Number Lock key the first time, it has activated it and it has remained active no matter how many times I turned the machine on and off, which is ideal as I have several spreadsheets running, so need to enter numbers and currencies quickly. However, the Inspiron 17 loses the Number Lock memory when it is turned off, so every time I turn it back on again I have to remember to activate it again.
Possible to apply a setting that will keep the Number Lock active, ie so when I press a number key it will work no matter how many times I turn the laptop on and off?
Vista's defafault settings for "Power Saver" sets the minimum and maximum processor state as ZERO percent for battery. I don't understand this. If I open performance monitor the processor is shown as 80% max on AC power. If I disconnect the AC power while on "Power Saver" the monitor shows 40% max frequency. Why ZERO percent as default settings, to me that would mean it wouldn't even run.
Certainly for running light stuff it runs a lot cooler, the fan hardly cutting in at all.
I just bought a new Dell 5520 with switchable graphics. It has 2 graphic cards:
Intel (R) HD Graphics 4000, and
AMD Radeon HD 7670M
Now, here is my problem, whenever i try to run any game I have to switch to the ADM card. But some games ask to choose a Graphics Adapter at which point I can only select the intel HD Graphics Card and not the AMD one. I tried to set High Graphics setting with AMD Catalyst Controller but the game does not seem to detect it. What do i do?? Is there any way I can select AMD card as my Default Graphics Adapter?
I'm currently using an external disk as back-up with Time machine and I also put movies on it to declutter my laptop. I recently noticed when trying to share a movie with a friend that it's not detected by PCs.
Is there a way to do so without having to erase the disk?
I am getting the following persistent error in Event Viewer on my brand new x220:
Faulting application name: HyperW7Svc64.exe, version: 1.0.0.1, time stamp: 0x4cf5de0b
Faulting module name: HyperW7Svc64.exe, version: 1.0.0.1, time stamp: 0x4cf5de0b
Exception code: 0xc0000005
Fault offset: 0x000000000000d248
Faulting process id: 0x35c
Faulting application start time: 0x01cc1678fdbedc11
Faulting application path: C:Program FilesLenovoRapidBootHyperW7Svc64.exe
Faulting module path: C:Program FilesLenovoRapidBootHyperW7Svc64.exe
Report Id: 41b6ea8b-826c-11e0-af33-f0def15ccf15
so im going around to install windows 7 through boot camp, got my blackbook ready, i must know which OS will boot by default if i dont touch anything? or am i doomed to hold the option key or something every time? just started installing snow leopard too
View 10 Replies View RelatedI'm using MAC os 10.6.1 and my MBP region is Russian(Ukraine) I want to set my default language in applications (to type - not menu language) as English. How to do it? For some reason all application start and change my Input Source to Russian every time.
View 3 Replies View RelatedI'm new to Open Office Mac and when I try to print it says no default printer found.
View 10 Replies View RelatedI have tonnes of home video clips which can't be more than 6 hours total in recording but are actually frikkin 15GB total in size.
I copied them on my HD straight from the camcorder, and now I need to make a DVD out of it. Now I realize no DVD in the world will hold 15GB, but the thing is, as I said its just 5-6 hours and its 15GB because its uncompressed.
So I need a software which'll do the dirty work for me: compress and make one DVD out of these clips.
I'd like the DVD to have the feature of being able to let me skip to different video clips etc. by clicking "previous" "next".
I'm encoding MKV to PS3AVCHD and the temp for the GPU is hovering around 90C. I will be encoding it for ~12 hours.
Should I be concern about it? The palm rest doesn't get too warm
just curious. read the review that the 9-cell can last 4 hours. wondering how the 6-cell will last.
View 7 Replies View RelatedI picked up a VPCZ112GX/S from the Sony Style store this evening. I've taken a metric-sh*t ton of pictures that I'll be posting over multiple posts.
I also have a video of the first-boot sequence that I'll try to upload this evening.
System specifications are HERE. First one who asks what is in it, gets smacked
I purchased this model primarily to evaluate the 128GB SSD. This configuration has two 64GB Samsung MMCRE28G drives configured in RAID0 (Stripe). I'll post a new thread on my findings this weekend, if somebody else doesn't beat me to the punch. I also have a VPCZ11FHX/XQ on order with the 512GB SSD.
I DON'T HAVE MANY COMMENTS ON THE MACHINE AS I JUST FINISHED TAKING THE PICTURES BELOW. I will say that the previous generation Z charger works with the new Z. I haven't taken the new one out of the box.
I also have a video of the first-boot sequence that I'll try to upload this evening. In addition, I did a video showing the duration from power-on to loading Windows with the RAID prompt enabled and disabled. This will go in the SSD thread.
well my signature series Z11 with everything but the kitchen sink was delivered today. A little over 6 weeks from order to delivery but I'm not complaining as it is here right now !
So, without too much further ado, here are some pics and opinion and what is supposed to be the ultimate new Vaio Z
When i try to play a 1080p movie over hdmi on my tv, it doesn't run smoothly ( i think its called framedrops?)
The videocard is a 9300m GS and since i've got hybrid graphics, a driver update is not possible.
The laptop is a vaio z21wn.
I've tried multiple things (coreAVC, MPC, VLC, etc..) but none seem to give better output.
Are there other solutions to this problem?
It is an automatic drive. My computer says the bluray drive is working right. Tried right clicking and ejecting and hitting the eject button. It is an automatic slot drive. Tried windows software to find problem and it couldn't work either. It worked just 10 mins before it happened. It is a windows 8 pro OS. HL-DT-ST DVDRWBD CA10N is the drive windows calls it.
View 2 Replies View Relatedyesterday i open my laptop(model 6530s) and clean motherboard but after setup when i start laptop that time on top right corner showing one message MOUSE NOT DELETED and mouse pad not working any more ..Now what can i doi tryed to open motherboard battery but still same ...
another problem when i watched movie some of website laptop suddenly going off ..also when i try to do somthing on bios that time also going trun off
I have a Inspiron 1525. Recently I have tried to watch movies. Soon after the movies start my laptop shutdown. There was a time I could watch movies but not now. It continually shuts down within a few minutes.
View 1 Replies View RelatedI play dvds on my hp 2000 windows 8 cyberlink and it won't respond....
View 2 Replies View RelatedInspiron 17R N7110 has no power, I was watching movie and the laptop just froze, after waiting a few minutes I performed a hard power reset, machine was restarting, abruptly shut off and has been dead since.
Tried the power reset by removing the battery and holding the power button for the static discharge ... and so on. No luck. Machine has no lights on front, it is completely dead, battery was 100% charged. Tried two charger cables, both have green lights till I plug them into the machine then green lamps die.
I think it would be the DC power connector or the motherboard... or something else that I have not thought of yet.
When I'm surfing, watching a movie or whatever, my screen adjusts the brightness automatically. How do I stop it from doing that?
View 9 Replies View RelatedI was just wondering, what power setting do you all run your computers on? Balanced, power saver, or high performance? Is there a benefit to running balanced? Also, do any of you have custom power settings such as the ones dell offers, if so how do those work for you?
View 10 Replies View RelatedI would like to put Vista on it. Do I need to setup the XP which came on the hard drive or can I just put the Vista disk in and install that .....
View 8 Replies View RelatedI just bought a new Dell E6500 for my BA/MA. I had a Sony vaio SZ 430 for two years and it was a huge waste, Bloatware, slow operating system, warping case, and a cpu which would run at 178 F during idle. Anyway I just bought a Dell Latitude E6500 for 1044USD here are some specs.
Intel Core 2 Duo P8600, 2.40GHz, 1066MHz 3M L2 Cache, Dual Core
3.0GB DDR2-800MHz, 2 DIMMS
250GB Hard Drive 9.5MM 7200RPM FFS
15.4 inch Wide Screen WXGA LEDLCD
Its running a windows Vista Downgrade to XP professional
I am trying to set up a quick reliable business machine and part 1 is clean install exactly what do I need (resource DVD) and are there any threads to direct to me also does the machine come preinstalled with vista or XP? I avoided the bluetooth, camera, and fingerprint reader and fancy graphics card because I never used these on the Sony and had a millions of issues with drivers. Sorry I am coming from a childhood of macs and a bad experience of PC's my plan is to clean install right out of the box to avoid losing any important files. Thanks for any help I am getting the unit on the 30th so there is some time if I need to get some drivers dl'ed I did get the backlit key board I fell in love with it since it first came out on my pops old powerbook
The microphone is "active" all the time, touching the area around it and you can hear it through the speakers. Opening the Realtek device manager and the Mic is ticked in the top row of three "Speakers (ticked) Digital out (unticked) and Mic (Ticked). How do you turn it off ?
View 5 Replies View RelatedI have an elitebook 820 with windows 7. I would like to know how i can change setting of the touchpad on the laptop. I looked in the control panel but there is no touchpad menu. i found on other discussion that the touchpad setting can be found in the Mouse menu on the tab "device hardware" but such Tab doesn't exist.
How and where can i change the touchpad setting on my computer?
My Father has given me his Acer Aspire 5315. It is full of stuff i dont even need. It is quite slow aswell. I was just wondering is there a way i can delete all programs but keep Windows. I would like it so it exactly how it was in it came out of the box with all drivers installed. I only want to do this because i dont have a Windows Vista Disc or any Driver's for the laptop.
View 5 Replies View RelatedMy question:
I will be going to mainland China in 2 weeks. I bought a electrical converter. I am confused as to use the "High" or "Low" setting on the converter for my Z690?
Nothing on the Sony charger on wattage! I see a 19.5V Output and Input of 100-240V /1.5A and 50-60Hz
The converter/transformer has a high switch for appliances between 50 and 1650 watts and a low switch for equipment under 50 watts.
So if the Z690 charger is over 50W, I set the switch to High? I am just concerned that I will damage the laptop since the High goes up to 1650 watts?