Dell :: XPS M1530 Does Not Sleep When Lid Closed
Apr 6, 2009
I've had my Dell XPS M1530 Notebook for just over a year now and I've been having a problem with the lid and getting the notebook to sleep when closed almost since day one!
Essentially, closing the lid does not put the computer to sleep! The screen stays on and the computer stays on. I've checked in the power options and they are all correctly configured to sleep, but I've also tried configuring them to hibernate but this still does not work. I've tried almost all of the software options and settings that I can think of and also opening up the computer to see if there were any loose connections, but everything seems fine!?
View 4 Replies
ADVERTISEMENT
Feb 15, 2013
Just received a brand new Inspiron 17R SE 7720 and it won't come out of sleep mode after the lid has been closed. Power's fine (battery and mains lead) and sleep mode when the lids up is fine. If I set the power management to hibernate when the lid is closed that's fine as well.
Quick resumption of services via sleep mode is important to the way I work.
View 6 Replies
View Related
Feb 8, 2009
My wife and daughter both have Dell Inspiron 1525's. My daughter's works flawlessly while my wife's has one irritating glitch. When the lid is closed, instead of going into sleep mode, it reboots itself. It doesn't complete itself though it always stops at the "windows shutdown improperly how do you want to restart" or something like that screen...it's the dos screen that says do you want to start windows normally or in safe mode, etc.
When it does this it never shuts off so I'll get home from work or I'll get up in the morning to find the fan has run all night...It was purchased in august and I'd hate for my wife to prematurely burn this thing up.
I've gone into ms config and one by one tried to isolate what the problem could be. Sometimes I have it narrowed down or actually got the culprit because once in awhile it'll do what it's supposed to do....then next time the lid gets closed it goes back to the existing problem.
View 14 Replies
View Related
Oct 18, 2009
My 1410 has a very strange problem. If I put it to sleep with the lid open, it will properly stay asleep for hours and hours.
However, if I then close the lid, it will always wake up within 5 minutes (I can tell by the status lights). This happens regardless of the lid-closing action I have specified in Windows (hibernate, sleep, none).
If I tell it to hibernate on lid-closure, it will hibernate properly. If I tell it to sleep on lid closure, and close the lid, it will go to sleep and then quickly wake up again. What the hell could be doing this, and how can I fix it?
The laptop is a bone-stock aspire 1410, running windows 7-64, with up-to-date drivers and the latest BIOS (happened with old BIOS too).
View 4 Replies
View Related
Dec 3, 2012
So I have an Inspiron 17R SE 7720 that has all the latest drivers with BIOS A11 (Win 7 Ultimate x64)... I have all the power settings configured for correctly for sleep (no hybernate), however no matter what I try, I can't get the laptop to wake when the lid is closed via USB keyboard.
I'm using Logitech's Wave MK560 combo (unifying receiver) - both the keyboard/mouse have the wake option enabled in their hardware settings. I also have wake from USB enabled in the BIOS.
The interesting thing is that if I put the computer to sleep with the lid open, I can make it sleep/wake it from the Logitech devices. With the lid closed, I can only make it sleep - the only way to wake it up is to open the lid and press the power button.
Cliffs Notes:
Lid Open : CAN sleep/wake from USB Keyboard/Mouse
Lid Closed : Can ONLY sleep - won't wake unless I open Lid&press power button
View 16 Replies
View Related
Aug 20, 2013
I have an Inspiron 15R (5537) that has all the latest drivers with Dell BIOS A01 (Windows 8). I have the options for closing the lid set at "Do Nothing" for both battery and plugged in, however no matter what I try, when the lid is closed I can't get the laptop to wake via USB keyboard or mouse.
Both the keyboard and mouse have the wake option enabled in their hardware settings. I also have wake from USB enabled in the BIOS.
The interesting thing is that if I put the computer to sleep with the lid open, I can make it wake it from the keyboard or mouse. But with the lid closed, the only way to wake it up is to open the lid and press the power button.
Summary:
Lid Open : CAN wake from USB Keyboard/Mouse.
Lid Closed : Won't wake unless I open lid and press power button.
View 11 Replies
View Related
Feb 17, 2009
I use my Dell laptop as an HTPC, I have never had this problem before but now all the sudden I'm having this problem.
View 10 Replies
View Related
Nov 23, 2009
The last day, I close the lid and the computer, theoretically, enters way sleep (or standby.).
On having turned to open the lid, the PC it was in StandBy but it does not wake up
I have tried all the keys, even I have turn off the laptop and turn on but it not wake up The screen is displayed black, without cursor, characters...no displays anything!
CD-Rom drive not runs either.
The laptop is in "sleep" eternally!
View 12 Replies
View Related
Jul 13, 2009
Situation : I finish surfing web and I wanna give it a little break. I close the lid.
I have set it to goto sleep when lid closed (if any1 suggested this). I come back open up but the laptop didnt go to sleep, HDD activity is minimal but I can hear it spinning.
Also the screen is still bright but black, I can still change the brightness though with the Fn+upArrow or Fn+downArrow. In order to return to functional state I have to HARDreset.
View 6 Replies
View Related
Oct 24, 2008
ive been having the problem where when i put my laptop to sleep, i cant get it to wake up again!
I press the power button and the blue lights flash etc. however the screen just remains black!
I believe other Dell users are having the same problem, ive searched around a bit and found other posts, but no answers yet?
View 10 Replies
View Related
Dec 5, 2008
I have a XPS M1530, And the screen doesn't go off when I close my laptop. I have contacted dell about it. They replaced the mobo, the LCD Screen, the Palm rest. And it still doesn't go off... I'm wonder what it can be...
View 10 Replies
View Related
Jan 24, 2009
I recently upgraded the video driver on my m1210 and now when I have the lid closed the lcd will randomly turn on and stay on.
I didn't have this problem before I updated the display driver. Has anyone else had this problem and is there a fix for it?
View 7 Replies
View Related
Mar 10, 2008
with this new driver my LCD does not shut off when i close the lid.. is there any fix for this? the dell website drivers worked for this, and i sleep with my laptop next to me and the light MUST be off when i sleep.
View 15 Replies
View Related
Apr 7, 2009
Is this by design? I never noticed it before, and I'm wondering if it's always been that way, or if something has recently gone wrong.
I have it set not to go to standby or anything when I close the lid, but it seems like it should still turn the backlight off to conserve battery.
View 3 Replies
View Related
Jan 3, 2010
I decided to reinstall everything and make some hardware upgrades. Fisrt of all I upgraded BIOS, DVD firmware etc. Then I installed Win7x64 (proffesional), previously I had Ultimate RTM version.
After all almost everything is working fine. System is working great except one thing - something is wrong about power management. Sleep, hibernation and poweroff option is working ok. There is problem with lid only - when it's closed external monitor is turned off (that's ok) and main LCD is black (but backlited).
Music is still playing, but also that soon is gone (I always play that from Internet). Fans are working as usual, LCD is not completely turned off, music stops, keyboard is somehow working (i.e. Fn+F10 - dvd key), but I can't do anything with computer then.
The only thing that is working then it's holding down power button to turn off computer hard.
In power options I tried to change some options about lid. On plugged in - closing lid: do nothing .....
View 7 Replies
View Related
Dec 29, 2014
I have a dell inspiron 3521 and lately it has been restarting whenever I close the lid. It has suffered no impacts and it is relatively new.
View 1 Replies
View Related
Aug 26, 2009
So I use my 24" LCD external with my mbp lid closed but there seems to be a problem.
After I'm done using the computer, how do I put it to sleep? Normally I would just shut the lid, but the lid is already closed.
So what I did was I just put it sleep manually through the taskbar at the top. But when I woke up this morning my laptop had its fan blowing and the laptop was pretty warm. Almost as if the laptop was still on all night.
Anyone else experience this? If so how do you put it to sleep?
View 10 Replies
View Related
Apr 16, 2010
Where is the sensor that senses when the lid is closed on the laptop? It hasn't worked properly since I got my laptop back from Acer repair a year ago.
View 10 Replies
View Related
Feb 25, 2009
Can I run the notebook closed and just have it hooked up to an external monitor?
View 7 Replies
View Related
May 5, 2010
I bought my Acer Aspire 5738G laptop last november and this month I experienced for the first time my laptop shutting down by itself while playing cs-source.
The laptop is quite hot and upon searching the net found out that it's most likely due to overheating.
My question is about the ventilation at the bottom of 5738G.
Is it supposedly closed? No holes/slots? Cause I think it's the cause of overheating.
The system doesn't have a way to take-in air
It's like it was designed to be a bottom vent for air intake but then forgot to make holes in it.
I also searched for it's manual and confirmed that it is a ventilation slot.
It even says there "do not cover or obstruct the opening of the fan".
(I've got a screen shot attached. I'm talking about part 6. That part of my laptop doesn't have holes/slots but clearly there should be according to the manual.
View 10 Replies
View Related
May 17, 2009
I just found this weird occurence. I often use my Vaio Z with external monitor. So most of the time I have my lid closed. Accidentally I was opening my Network Status and noticed that my wireless speed was only 1Mbps which was pretty aweful for an N speed. I was pulling my hair off, trying to figure out the problem with the setting. By looking at the signal, it was still pretty decent 3 bars.
Finally I found out that, whenever I opened the Sony Z lid , the speed would jumped up to 90Mbps and over maximizing around 150Mbps. Surprisingly the signal quality remained the same around 3 bars.
Did anybody experience this as well? Is it normal? Why did this happen?
I already turned off power management for wireless Intel 5100 AGN as well.
View 5 Replies
View Related
Dec 13, 2009
I have a MacBook pro which I was using this morning on battery power, closed the lid to take a break, now it won't start up again. Tried plugging in the mains but nothing?
The small 'sleep' light at the front isn't pulsating as normal but is on all the time.
View 8 Replies
View Related
Sep 9, 2014
I got my w540 in about 2 weeks ago, and finally had a chance to start migrating everything to it last week. I bring my laptop(s) to and from work everyday and right now I'm bringing a w520 and my new w540. But everyday since I started bringing my w540 home with me when I get home the laptop is running when I take it out of my bag.
So yesterday and this morning, I made 100% sure the laptop was in sleep mode and nothing was running before I put the laptop in the bag. I get to work 15 minutes later and the laptop bag is about 150 degrees because the w540 is running even through the lid is closed.
View 2 Replies
View Related
Jul 2, 2014
I just received my Lenovo X1 Carbon; it's a very good product and I really like it. Everything is working as expected (fast & smooth) except one thing: laptop works kinda strange with the closed lid
My product code is 20A70037US, I'm running Windows 8.1 Pro.
I've chosen (in power options) that laptop does nothing when lid is closed. Yes, it works but... I'm using TeamViewer to connect to laptop; it works but TeamViewer periodically loses connection and displays message "The screen can't be captured at this moment..", Microsoft installer (I'm installing Visual Studio 2013) is paused (!), and Google Chrome won't render pages (but Internet Explorer works fine).
If I open the lid, all symptoms described above are disappear: installer resumes downloading, Chrome render html pages correctly and TeamViewer works fine (no periodical messages shown).
For me it looks like laptop not in "normal" operational state but kinda under power saving.
I've set power option to "High performance" (laptop is plugged) but it doesn't work.
View 4 Replies
View Related
Aug 15, 2009
Is it right, that there is no action possible for the power button when the lid is closed?
When I am at home I connected the Z to my external display and dont want to open and close the lid every time when I am powering up or down the Z.
View 7 Replies
View Related
Jan 2, 2009
I cleaned my over-1-year old DV6563 laptop since the heat sink was filled with dust inside. Anyways, I got everything back together, but unfortunally the inverter lamp on my monitor went dead (I got a replacement off Ebay and the monitor works again).
However I have a slight issue. Every time I close down the laptop lid, the screen stays on (it doesn't turn off the screen). I even set windows to go into stand-by when the lid is closed and it does not turn off the screen or go into stand-by (unless I press Fn+Sleep).
I even installed Windows XP to see if it was a Vista issue...however the problem still exists. I do have the lastest Nvidia drivers too.
View 10 Replies
View Related
Oct 29, 2013
After being closed for a short time when I open my pavilion g6-1b60 I have a flashing light on cap lock and my wireless light is amber and the scren stays black.
View 1 Replies
View Related
Jan 17, 2015
My Acer aspire switch 10 automatically turns itself off if it is charging and the lid is closed, when i tru to use it i find it hard to turn on and 99% or th time i need to hold the poer button for 10-15 seconds once or twice for it to power on. Never used to do this when i got it but not sure if it is windows being buggy or hardware...
View 3 Replies
View Related
Jun 20, 2014
When my E531 is connected to Onelink Dock Pro and the lid is closed, at least 50% of times it won't boot up. When I open the lid, either there is a boot screen or the screen is blank. Usually when I hold the power button for a few seconds and then try again, computer boots normally. For me it seems this is some kind of a BIOS issue because Windows is not booted yet. Sometimes the problem occurs when the lid is open too. Without the dock the computer functions properly.
At first i had a BIOS version 1.23 (which I didn't found on the internet btw) and then tried to fix a problem by downgrading to 1.22. I also changed several BIOS options reagarding the booting process. I have the computer on a shelf where the lid cannot be opened.
View 9 Replies
View Related
Feb 25, 2014
I've updated my Intel Wireless LAN Driver to 17.0.2.5 and since then every time I close the lid (I'm connected through a OneLink docking station) the wifi stop functioning normal (connects to network but shows "Limited" and practically not functioning). If I open back the lid everything goes back to normal, either directly on the laptop or while still working through the docking station.
I'm using a Yoga S1....
View 1 Replies
View Related
