HP 2000-2C27CL OS/Software :: Windows 8 Failure Configuring Updates And Reverting
Apr 5, 2014
I have a HP laptop model 2000-2C27CL running Windows 8 that I was given because the person cracked the screen. I have removed the bad screen and I am waiting for a replacement screen to be delivered. In the meantime I have hooked this laptop up to a external monitor. I reformatted the computer and get into Windows with no problem. I got all of the driver updates that the HP Update Center said it needed. I then proceed to get updates for the Win8 OS itself.. they download, install, and upon reboot I get the message...
"Failure configuring Windows updates Reverting changes Do not turn off your computer."
So I reformatted the computer again (very time consuming with Win8 IME) and the same thing happens all over again....
"Failure configuring Windows updates Reverting changes Do not turn off your computer."
View 5 Replies
ADVERTISEMENT
Apr 27, 2014
Product Name :- HP Pavilion g6-2202tx Notebook PC
Operating System :- windows 8 pre-installed
I just factory reset my hp pavilion g6 laptop with recovery media and after reset i tried to update and it showed downloading updates and its on 0% for half hr then updates where downloaded and installed and during restart I get this message :- "Failure configuring Windows updates. Reverting changes. Do not turn off your computer" for more than 1hr ...
View 8 Replies
View Related
Sep 20, 2014
This computer is my friends. I don't know what she did to it. I have fixed it before but this has been running a for hours and the same message stays there.
"HP 2000 error failure configuring windows update revertong changes do not turn off computer"
I forgot too say it is Windows 8.
View 1 Replies
View Related
Nov 15, 2014
I own a Probook 4740s. It came preinstalled with Windows 8 and HP security tools. Recently I decided to upgrade to Windows 8.1 and in order to do this I had to uninstall HP security tools. I succeded uninstalling and updating Windows. After a day of usage the computer hanged. I refreshed it using HP recovery. As the OS version was old it updated itself after a day or two. The update went fine. After booting windows the next day It started configuring updates. Something went wrong and it failed with : "Failure configuring windows updates reverting changes". It hanged up and never finished. I refreshed again believing it didn't properly refresh. The whole thing happened again.
After refreshing again and then completlly reinstalling windows the problem persists. By this point I refreshed the computer 4 times and reinstalled Windows 1 time. I tried turning off all non-windows services and updating as per this forum : [URL] ... but it didn't work. It failed with:"Failure configuring windows changes. Reverting changes"...
HP Probook 4740s
Product number: H5K32EA#BED
OS: Windows 8 pro 64-bit
View 3 Replies
View Related
Feb 28, 2013
My Dell Inspiron 1525 has suddenly decided not to turn on. I get up to a Windows Vista screen where it says "Configuring updates stage 3/3" and then it restarts itself again and again. I can't get it to do anything else. Before it wasn't even getting that far and it was restarting itself and giving me the option to launch startup repair which I did. I tried to restore the system but I was told that there were no system restore points. I turned it off and on again and it then started to take me up to the configuring updates page but no further than that and I no longer get the launch startup repair option. I have also been having a problem with the battery where every time I turn it on it says "ac power adapter wattage and type cannot be determined" and then won't charge so I can only run it when plugged in but at the moment I would just like to get it to turn on!
View 1 Replies
View Related
Dec 20, 2014
msg hard drive
0-S/N WXN1E53EN501
Short self test unsuccessful
Tried other diagnosis, no joy
View 1 Replies
View Related
Sep 8, 2012
I get the "failed configuring windows updates reverting changes" message when i try to update my computer, how can i make sure that the updates go through?
View 9 Replies
View Related
Jan 24, 2015
I brought my Inspiron 600m back to life and did a fresh install of Windows XP SP2. After that I began installing drivers for it from Dell.com at the following link.
[URL] ....
Now there wasn't any drivers that other recommended like chipset/system drivers available when searching by service tag. However if you search by model (600m) a lot more come up. Im not sure if I should download any of them.
My problem is it cannot connect to the internet and the ethernet port is dead. I have no error messages. I tried LAN connections using an ethernet cable to another machine and it does not take.
I am running Intel PROSet/Wireless and it does see nearby networks but cannot connect. It says configuration failed. I have read all the usual documents for troubleshooting but no solution yet. I have heard there where some flaws with this model and some of the equipment.
View 3 Replies
View Related
Apr 30, 2014
Every time I run the Client System Update tool and check for updates I get the error message "Check for updates failed"
I have a Dell Latitude E6430 running Windows 7 SP1 64 bit and I am connected to the internet...
View 2 Replies
View Related
Aug 31, 2009
Does anyone think it likely we will see some kind of hardware updates to the Dell laptop range to accompany the release of Windows 7??
I'm thinking processors/graphics cards etc.
View 5 Replies
View Related
Dec 2, 2009
While I'm still a fan of Dell, who ever is in charge of releasing updates needs to be fired at Dell, these updates are worthless
The Video update driver for the intel 4500 video is crap still Areo problem the A08 bios update fixes the video it seems but cause about 5 other problems
few windows 7 drivers in all ......
View 10 Replies
View Related
Jan 7, 2009
One of the several Dell techs I have had to talk to told me not to turn on Windows updates after my last restore to factory settings. Anyone else ever been told this?
Sounds ridiculous. The guys name was JoJo (sp?). He told me I couldn't install any updates. Not SP1, nothing.
He said that Dell and MS were working on "issues" that would be cleared up in 2-3 months. Curiously, this is around the expiration of my warranty.
View 3 Replies
View Related
Jun 23, 2009
Just got the laptop today. Went to Windows Updates out of the box and boom, it shuts down. A LOT. I managed to get the 64 bit updates in but it keeps shutting down for the rest. System Restore doesn't seem to manner.
The bottom of the laptop is hot to the touch after 2 hours worth of idle usage spent on updating windows....
Specs
Intel Core 2 Duo Processor T6400
4GB (2/2) DDR2 667 SDRAM
320GB hard drive
Blu-ray Disc Drive
9600
NVIDIA GeForce 9600M GS
The only changes I've made is removing some annoying bloatware, but I didn't expect problems this fast and this early.
I hope this is not a heating issue because I would hesitate to get a replacement. 6930 owners...have you had this problem before. Does it get hot a lot? I hope it doesn't explode if I try to play Left 4 Dead on it.
View 5 Replies
View Related
Apr 1, 2010
I am getting error code 80070490 every time I try to do Windows updates. I have done the system restore as far back as I could and this did not solve the problem. I am going to be putting a new hard drive in the computer, but would like this problem to be resolved first.
View 4 Replies
View Related
Sep 29, 2014
I love everything about my yoga2 pro, except, when I got it I installed a win 8.1 upgrade because windows told me to. everything seemed to be fine.
After that, the system asked me to install another upgrade. when trying to install that one it said it could not install and was undoing the changes. I read some forums awhile back and it talked about a particular update that needed to be uninstalled before you could proceed. I tried to do that, but it wouldn't let me uninstall the initial 8.1 that i installed.
I let it go because it was asking me like every month or so to automatically shut me down and install updates. But now it forces me to install updates every two days and then can't update so, it undoes it changes and it takes like 30-45 minutes or so. Plus, i do need to get it to be able to accept the updates at some point.
I'm thinking I have to wipe everything and start from scratch??
View 4 Replies
View Related
Apr 1, 2013
I've had my Dell Inspiron 1545 for a couple of years and it ran fine until recently I noticed that I couldn't update ANYTHING, Itunes, adobe, java, AVG... ect. so when I looked into what could have cause this problem I noticed a lot of the windows updates had failed, so of course I reran the updates and turned my computer off when it directed me too and no luck they still failed I need this computer for school or at least long enough for me to buy a new one.
View 1 Replies
View Related
Nov 17, 2014
My Acer is having real trouble with Windows Updates. They download, then some of them install and I have to restart. BUT then it tells me most of them have failed, and now I have 56 updates that I'm told need downloading and installing. When I do the update/install I don't do anything else as the laptop is just so slow at the best of times.
Should I swap from Wi-Fi to an Ethernet cable?
My Acer laptop, (not a touch screen), specs are: Aspire V5-123-12104060nkk, Model ZHL Windows 8.1 - AMD E - Series (E1 - 2100, 1 GHz, 1 MB) - 29.5 cm (11.6") LED - 16:9 HD - Active Matrix TFT Colour LCD - ComfyView - AMD Radeon HD 8210 - 4 GB DDR3 SDRAM - 500 GB Serial ATA. It's a 64-bit.
View 2 Replies
View Related
Nov 16, 2014
My Acer is having real trouble with Windows Updates. They download, then some of them install and I have to restart. BUT then it tells me most of them have failed, and now I have 56 updates that I'm told need downloading and installing. When I do the update/install I don't do anything else as the laptop is just so slow at the best of times. Should I swap from Wi-Fi to an Ethernet cable?
My Acer laptop, (not a touch screen), specs are: Aspire V5-123-12104060nkk, Model ZHL Windows 8.1 - AMD E - Series (E1 - 2100, 1 GHz, 1 MB) - 29.5 cm (11.6") LED - 16:9 HD - Active Matrix TFT Colour LCD - ComfyView - AMD Radeon HD 8210 - 4 GB DDR3 SDRAM - 500 GB Serial ATA. It's a 64-bit.
View 2 Replies
View Related
Feb 22, 2015
I have been trying to use the Live Updater and it is saying there are no updates I have installed the Acer Updater which is saying no updates and I can see that my Laptop has lots of updates from the software and drivers website.
View 3 Replies
View Related
Nov 11, 2009
hard time, reverting this machine back to XP.
The network driver should be a Atheros 5007E, For some reason its not working.
I got this laptop free and seeing i have a Enterprise edition of XP. I figure i'd wipe out this old VISTA.
where to get XP drivers for this card? As the other drivers i've figured out already.
View 3 Replies
View Related
Nov 12, 2013
I keep getting blue screens complaining about igdpmd64.sys x00000050. I noticed on the day that I suddenly started getting blue screens Windows installed a bunch of windows 7 x64 updates. Does the recent windows updates can cause this?
At times I cannot even reboot normally when it occurs. I have had to restore to a previous version.
View 9 Replies
View Related
Nov 27, 2014
I have a new Lenovo Z50-75 with FreeDOS - I made a Windows 8.1 installation, and all went fine.
After installing the around 70 updates - at one point it reboots and I get a black screen, right after shortly seeing the Lenovo Logo ( entering BIOS works ).
It is not booting Windows at all - I can not enter Safe Mode therefore, and I do not get any cursor.
The behaviour is reproduceable, done this 2 times. Also when it hangs in the black screen, the van get reall busy, lound and the notebook gets hot.
View 5 Replies
View Related
Jul 8, 2014
I have a HP Envy 15-j040eo that worked fine until about two weeks ago but then it did no longer recognize my wireless-n. At that time I had Win 8.1 64 bit with automatic updates. Other computers and iPhones still recognized my wifi.
After spending hours and days with the HP Support we finally did a complete reset of the computer. Now I have Windows 8 with the updates disabled and wireless-n works fine until I allow windows to update. If windows is allowed to update the computer do not recognize the network anymore. With other than -n networks or with cable it works fine. The only way that me and the HP Support has found get the wifi working is to completely reset the computer. If I only make a refresh the wifi still don't work.
The wireless adapter is a Ralink RT3290 802.11bgn and it works with driver 5.0.25.0 on windows 8. When I first had the issue I tried to update to driver V5.0.46.0 but it still did not find the wifi-n in windows 8.1.
BIOS is updated to latest version and even if I turn automatic updates off the network went dead when upgrading from Windows 8 to 8.1 but on Windows 8 it works as long as I choose not to update the driver for the wireless adaptor.
As I prefer to have windows 8.1 and updated with automatic updates; how can I configure it to still work with wireless-n?
View 4 Replies
View Related
Mar 3, 2015
Everytime windows updates my Acer AO722, windows will not start. This started after I did a factory restore. When shutting down windows updates my system and then windows 7 will not start up after a restart.
View 1 Replies
View Related
Jun 18, 2009
[url]
This is what I have, and I imagine HP probably use the same drivers for most of its late model laptops on windows 7 for the touch activated media button i.e. the back lit strip above the keyboard just below the LED screen that let you activate WIFI, sound. playback..etc..
I have read from several posts that windows 7 install fine on HP laptop just that the touch strip driver does not work with the factory drivers.
View 4 Replies
View Related
Apr 11, 2010
Windows (Vista) Updates shows this update for my Compaq Presario F572US notebook PC: "nVidia - Display - NVIDIA GeForce Go 6100". The size of the download is 64.3MB.
I visited nVidia's website to see whether they had an update; they had none. So, I'm wondering whether I should get this update suggested by Windows Update or ignore it.
View 4 Replies
View Related
Apr 18, 2014
I am having a problem with my Pavilion dv6200
This is third time the same thing is happening to me. After i install some updates, display dimms, and background light became darker. When i restart computer, and enter BIOS, or if i am just looking at the screen before i log on to windows, backlight is normal.
View 9 Replies
View Related
Sep 23, 2014
I just bought my Acer Aspire V5-552g a week ago. Everything seems to be working fine. However, Windows advised me to install updates which I did. After installing the updates the touch gestures are not working anymore. I tried updating my drivers, which I downloaded from the Acer support site, but it did not work. All gestures are not working. What I need to do. Is this a result of updating Windows? How can I undo the update?
View 3 Replies
View Related
Jan 26, 2015
I have an Acer Aspire V3-572g. My laptop came with windows 8.1 installed already. Currently, my pc is being reset to factory settings because I can not figure out how to keep the hdmi from going out after windows updates. The only way I can keep get the hdmi port to work is the factory reset it. The only way from keeping the hdmi working is by turning off windows updater. However, I'd like to figure out how to keep the hdmi working without doing so. My graphics card is Nvidia 840 M. Here are a list of things I've done after my laptop stops recognizing the hdmi.
Uninstall and reinstall the display drivers, both from intel and Nvidia
Update the drivers to be up to date
Downloaded intel's utility manager to keep driver update to date
Downloaded factory installed drivers from Acer's website
Contacting microsoft and have them remotely connect to my laptop
Restored back my laptop to previous working conditions (although the hdmi never worked by going to a restore point)
Swapped hdmi cords and displays
After several hours of researching and trying different things I'm stumped. I bought this computer with the sole purpose of connecting it to a TV. I've also had this issue with another laptop which I returned. This problem isn't a hardware problem as I'm connected to the same monitor with an old desktop using the same cords. I'm guessing there is a compatability issue with windows and the display drivers when there is an update.
View 2 Replies
View Related
Feb 27, 2014
I have a T440, and I've set in BIOS to swap places for fn and ctrl. This works great until the machine goes to sleep or similar. After awakening the machine the keys are back to their original setting, with fn being fn, and ctrl being ctrl.
I havent explored this in detail but just found the machine sporadically losing the setting, but never while I'm working on it. So either from sleep or from locked screen.
I always use FnLk as well and that is also lost when this happens. I have to restart to get back the setting for fn-ctrl swap, but FnLk i can just enable,
I run Windows 8.1 on my T440.
View 4 Replies
View Related
