HP Display :: How To Restore Recovery On G62 B26er
Sep 4, 2014How to restore recovery on g62 b26er
View 3 RepliesHow to restore recovery on g62 b26er
View 3 RepliesRecovery software disapeared from drive d in windows 7 on presario cq62 209wm. How do I restore the program?
View 1 Replies View RelatedI am the original owner of a Dell X1 laptop. Even with the 3 year extended warranty, it is now clearly out of warranty. When we purchased this laptop, it did not come with any recovery or restore CD.
The windows partition finally died of old age with a corrupted file. Won't boot up as a dll is missing.
HOW can I get a recovery/restore CD? It is still running the original Windows XP OS.
I recently bought the XPS 15 and decided to reformat the drive with a clean win7 64bit install using the drivers CD to assist leaving the Dell recovery partition in place
I may now be selling, so attempted a Dell factory restore from the Dell restore partition using F8 on reboot
Following the manual, I hit F8 but cannot see anything relating to the Dell recovery options only win7 recovery options
I did upgrade to the latest bios from the Dell XPS 15 drivers site but surely they wouldnt have removed this options
I have no recovery CD/DVDs either. Why I cant see the F8 recovery options and whats the best option to factory restore?
I had a bad bios flash and now the laptop isn't booting anymore, just turning on and keyboard light flashing twice. i've tried a few methods but noting happened. what is the correct way to restore the bios from a usb
View 9 Replies View RelatedThe hardrive on my dv6-2174ca has died and so I will be replacing it. However, I do not have an install disk for Windows 7, everything was on the now dead drive in a partition.
What do I need to download or purchase from HP? Does HP sell a recovery disk or OS install disk?
I had an HP Pavilion dv6, but some part inside relating to the power failed. Ultimately, the constant cutting of power caused my hard drive to fail. I was able to use HP Recovery Manager to back up my files (music, documents, pictures, etc.). For Christmas, I was gifted a new computer, but it is not an HP. I tried to restore my backup file to my computer but it says that HP Recovery failed. I'm guessing the issue is because the new computer is Lenovo Thinkpad and doesn't have the HP Recovery software. How can I restore my files to my new computer?
View 4 Replies View RelatedIs there any way to restore the recovery parition (D if I deleted that partitino when reinstalling Vista?
View 10 Replies View RelatedI didn't make the disks when I first bought the computer (not sure why not) but I want to make disks for just in case I need to reformat in the future. What are the steps I need to take to do so? I am using Windows Vista Business.
View 10 Replies View RelatedI just bought this laptop 3 months ago and it did not come with a recovery cd. I remember someone told me that the new laptops now a days dont need it. Can someone tell how its done? Its an Hp entertainment laptop turion x2 2.4 ghz, 250 gig hard drive, 2 gig ram.
View 6 Replies View RelatedI'm trying to factory restore my HP Compaq 6510b with Vista. I've not got a recovery disc & laptop didn't come with 1 either. F11 option doesn't work however F8 allows me to access the Advanced Boot Options however there is no repair your computer or system recovery option on the menu.Also there is no recovery manager when searching at the start menu.System restore option doesn't seem to be much supportive as the date available only seems to be in the last few days.Am I wasting my time trying to factory restore or is it time to finally upgrade my once trusty & reliable laptop?
View 5 Replies View RelatedI installed Windows Vista but finally I would like to restore my computer with the Dell factory restore.
At boot, I press F8 but there isn't the "Repair my computer" option anymore...
How can I restore my M1530 with the Recovery partition ?
My friend's comuter's BIOS seems to be dead. When I turn it on the CapsLock light blinks for 2 times and nothing happens on my screen. I tried to remove battery and power cable for some minutes, but nothing changed. I also removed the CMOS battery and replaced it's RAM, but still got the same problem.
I've searched for solutions on everywhere, and most of the times I finally get stuck on this page. The combination of WIN+B seems to have no effect, something that makes sense as I'm almost sure they've deleted the HP_TOOLS partition.
In the page mentioned above, it's said that "a USB key with an HP_TOOLS volume can be used as an alternative". I really have searched everywhere, but I can't find how to create this USB drive. Where to find an extracted version of BIOS so I could restore from that. The only BIOS That I get from the driver's page is one ".exe" which I have to run it on that computer, which is impossible.
One last thing to mention is that I've downloaded the "sp61632" which gives me the "HP UEFI Support Environment Setup". When I try to install it on "USB Flash Drive" it gives me an error, but finally I've installed it locally on my computer, and then transfered its files on a USB Drive.
I renamed that drive to "HP_TOOLS", and the only folders in there are "Hewlett-Packard" > "SystemDiags", and in there can be found 8 items:
CryptRSA.efi
CryptRSA32.efi
SystemDiags.efi
SystemDiags32.efi
SystemDiags.s09
SystemDiags.sig
SystemDiags32.s09
SystemDiags32.sig
Just mentioning it, cause the total size is 2.5MB, and I can't see if thishas to do anything with the BIOS restore. So, to sum up, I need:
BIOS recovery files
a way to create USB drive with HP_TOOLS
Tried, but didn't work:
restart
remove HDD
remove CMOS battery
replace RAMs
WIN+B combination
WIN+B combination, with the flash drive mentioned above connected
The computer is: HP Pavilion DV6-2117ev
Product number: WB331EA#B1A
Operating system: Probably Windows 7 (I don't think this has any importance right now)
I had to buy the recovery disk for my Aspire V5, when I start I change the bios to UEFI with secure enabled, then I use the disk Recovery System, once that I´m in the Acer Console Management, and I Selected the restore full, a pop up came with the message "Please Change your bios to Legacy¨ so I click on the exit button, and I enter to the bios and select the legacy mode, then the acer console management starts and says that the systems recovery fails because this is only for UEFI mode. So I dont know what to do, I have another 4 disk for the recovery but none of this is a booteable disk. Also I tried with UEFI and boot secure disable and same result .
View 1 Replies View RelatedI bricked it with a bios now it shows a blank screen no video. How do i restore it.
View 9 Replies View RelatedI think I downloaded malware with a fake Java update I accidentally downloaded. I believe if I revert to an earlier date, I may solve my problem. I have an hp Probook 6555b using Windows 7.
View 3 Replies View RelatedPavilion G6-SS40SA running Windows 8. I am working on this computer for a friend. Somehow, he managed to get an app on there which ran at startup and resulted in it slowing down internet access to a crawl as well as making the machine virtually unusable . In an effort to get rid of it, he attempted running restore. However, neither destructive or non-destructive options would work. He was getting error messages - firstly 'Unable to reset your PC. A required drive partition is missing', followed by 'The drive where Windows is installed is locked. Unlock the drive and try again'. I managed to locate the program that was causing the problem, and uninstalled it. He asked me to reset the computer to factory state, but unfortunately, this will not work - it starts up, warns that all data will be lost and I confirm that I want to proceed. It then appears to start the process, but almost immediately ends shows a message saying that no changes have been made. Where do I go from here?
View 2 Replies View RelatedI bought a Dell Inspiron N5110 last year. I created two more partitions on my hard drive. Now I want to restore my windows to factory settings, but I cannot go through the restore process.
I am quite sure that the restore partition is physically on the hard drive, but maybe because of creating new partition it cannot find the drive, or the restore program looks to wrong partition. How can I recover with the current conditions.
I had two of the same Windows 8.1 OS on my Y500 (Cloned from original to SSD). Then Last night I tried to 'refresh without affecting your files' option for my OS on the HDD so I have a fresh OS to go back to incase anything happend. then on the Lenovo screen it said that the E: drive was being refreshed as well so I freaked and turned off the computer. NOw I cant access either of the OS's. What should I do? I did do a back up right before and the back up files are still there in a partition I made in the HDD. I used a USB boot of Puppy LInux to see the files on my HDD but it would not let me transfer it to an External Hard Drive. I will Try to install a better linux and try to transfer the OKR files to another Drive.
-how would I go about restoring the back up files if I were to get them on another drive?
Im only just burning the factory DVD restore of my system via Acer eRecovery Management. I should have done this a long time ago right when I first recieved my laptop. What ends up on the factory restore DVD?
Another question, my laptop really has noticably slowed down since purchase. I know this is natural...especially as I currently have lots of games installed...only 9GB currently free on C.
This free space varies drastically day to day as restore points seem to automatically be generated by vista. I think this automatically takes place when vista downloads and installs updates. How can I change this? It's annoying as I have a consitently fluctuating amount of free space on C..I frequently delete these points using Tune Up Utilities 2008 which brings me back to the norm.
Also, the D partition seems like a huge waste of space to just leave as it is. There are 103GB free on this partition with only two windows folders existing on there. I have never touched this partition thinking it is there only for disaster situations, like if vista dies and wants to make an image of itself here.
Is this correct or can I move other files onto this partition? Will this increase performance?
Im just trying to increase the speed of my laptop day to day workings. My girfriend was saying that the D partition can maybe be somehow partitioned to speed up the laptop?
How I can get the original system restore/recovery media for the above machine?
View 3 Replies View RelatedI'm having a Lenovo V480 i5-3230M as you know it pre- install with Windows 7 Pro 64Bit & it has license for Windows 8 Pro 64Bit . I think I want to reinstall my computer but the problem now all the recovery set that Lenovo supplies to me is Windows 8 Pro not the Windows 7 Pro. So, if I'm using the One Key button, are they going to restore my computer to Windows 7 Pro or to Windows 8 Pro?
View 2 Replies View RelatedAcer aspire 5742. HDD crashed. I nstalled WD HDD. Booted with recovery disk. 1st screen US english next. second screen no OS in box. tried restore with image you have created earlier. could not find image. tried other recovery tool, Recovery Management. will not let me click on completely restore system to factory defaults. If I go back and click install drivers the disk has many applications and drivers. Put the old HDD back in and booted from disk. It allowed me to click on restore to default but when finished and restarted nothing. restarted wit f2 and with old drive in shows no HDD
View 6 Replies View RelatedI recently got an E135 that came with Windows 8 preloaded. I really didnt like the new interface so I installed Windows 7 on it. Unfortunatly I forgot to create a recovery stick using this method. Now I'd like to reset it back to Windows 8 but I have no means of forcing the computer to acces the recovery partition.
Method's I've tried: F11 during startup gives me the option to recover Windows 7 from a USB stick. Which is weird because the original OS was Windows 8Rescue and Recovery and OneKey both give me the option to back-up but not to restore from the hidden partition.
Info: Lenovo ThinkPad Edge E135 335972G..Disk Managment shows one HDD divided into: 2x recovery partition, 1x EFI system partition and normal parition.
I purchased my T420 one year ago and have sufficiently "hosed it up" to the point I wanted to do a factory restore. I saved all my data then proceeded to create the CDs from the Q drive factory restore. I followed the instructs for more and more CDs and once I got up to #12 I noted that the time it was taking to create them was down from several minutes to several seconds. When I got to CD number 18 I thought "this is ridicules" and I popped CD 11 back in to look at its content (via Windows Explorer). I noted it had two folders: 1) Factory restore (or something like that) which was over 500 MB in size and 2) something about data. This "data" folder contained 1 KB of data. I then looked at all subsequent CDs (12-18) and they all only contained this data file. So, rather than continuing to make these (basically empty CDs) I stopped.
I then put the first CD in and rebooted the machine. The factory restore started and I swapped CDs until I got to 12. I put 12 in and it said the required data was not present and to insert the next CD. I did this until I ran out of the CDs I had created. I had to "X" out of the restore app and now when I boot I get nothing but a dimly lit screen and a flickering hard drive light! Am I totally hosed here? How many CDs would it have required had I kept making them? I am ( obviously) a novice.
ATrying to do a complete System Restore, and
"WARNING: Your laptop is currently running on battery power. Recovery Manager requires that your laptop is plugged into an AC power outlet."
...but charger is plugged in. Let battery run down a bit and plugged it in, and got same error while it was actively charging battery....
I have a Pavilion dv7-1103ea laptop which I need to restore to factory settings. I created a recovery disk from the system but it has become corrupted. I gave my laptop in for repairs to a local repair shop. My laptop is now working but it is not in the same format as when I purchased it. Is there any way of restoring the laptop to its original format?
View 1 Replies View RelatedI want to install a new ssd-drive, which is empty. I did create a DVD under rescue & recovery. But on startup with the new hdd, it only offers me a restore option, not a NEW system. R&R also only created ONE disc, imho thats not enough, dont I need some more for the whole system?
And I cant backup the whole windows system, because even though its fresh its 80 gig (some data was taken along, dunno which)...
And thats my problem in a nutshell: I cant create discs with ONLY the windows install-system, or rather I dont know how
I now tried 3 times, and R&R burns only ONE disc, and booting from that, it asks for a recovery. I want a new fresh virgin system...
I tried a couple of times, did not work. Had to swap back the old drive to work again.
System: Windows 7 professional
Lenovo L520
I have tried to restore laptop to oringal factory settings using Gateway Recovery Management disks purchased from Gateway. I have booted from System Disk (1 of 4) which ejected and instructed me to insert Recovery Disk 1 which loaded files (100%). Recovery Disk 1 ejected and instructed me to insert Recovery Disk 2 which also loaded files (100%). Then a "Restore Progress"window opened and and the process progressed to 79% and gave the following error messages: "WIMApplyImage fail. Error0x570" and "Fail to Restore Image".
Prior to attempting the Restore process, all I get when I start the Gateway NV59C laptop is the following screen:
Windows Boot Manager
A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.
If you have a windows installation disc, insert the disc and restart your computer. Click “Repair your computer,” and then choose a recovery tool.
Otherwise, to start windows so you can investigate further, press the enter key to display the boot menu, press F8 for Advanced Boot Options, and select Last Known Good. If you understand why the digital signature cannot be verified and want to start windows with this file, temporarily disable the driver signature enforcement.
File: windowssystem32ootwinload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file. what is causing these error messages?
I lost the restore partition on the original SSD that my Yoga 13 shipped with. Is there a collection of drivers and whatnot that would allow me to restore it to factory defaults on my own with a fresh windows installation? I have the win8 key from the BIOS but don't want to lose out on all the required drivers if I were to just reinstall windows myself.
View 1 Replies View Related