HP Envy M6 OS/Software :: Stuck On Logo Screen - Starting Automatic Repair
Nov 18, 2014
So recently I was on my laptop, and I walked away to go handle something it died of no more battery charge pretty normal I left and tried to use my laptop when I came home some hours later, and now it will not proceed to my password screen.It turns on and the circle loader just spins I'm putting this up from my phone seeing as I can't use my laptop. I ran some test that told me it failed because my dst drive , or something hard drive 1, system E I'm not really sure.
Sometimes when I turn it on it will say "starting automatic repair" or something I'll leave it on then the screen just goes black, it'll still be running. I really don't know what's wrong with it...it's very sudden my laptop never occurred problems before. It won't even load when I press f12.I have a HP ENVY m6 sleekbook. It's not touch screen. It has beats audio but, it doesn't have a press able beats audio button. No CD/disk drive I can't load disk in my laptop. The batteries built in Model # m6-k010dxHard drive short dst fails extensive test....
View 8 Replies
ADVERTISEMENT
Dec 25, 2012
My brand new Inspiron 14z remains on the starting DELL screen after boot up.
The initial windows 8 parameters have been registered properly (it seems...) and since the second requested reboot the PC does not go to windows 8. I have been suspecting a hardware problem and ran the full diagnostic (success!). There is nothing into the setup (F2) parameters which looks wrong and none of the boot options (F12) I tried have been successful... Is there a way to run a windows 8 safe mode boot or equivalent (note that I cannot go inside windows 8 top change this kind of option of course), and to move forward?
I desperate to see the someting else than this Dell Logo in the middle of the screen (forever?).
View 4 Replies
View Related
Nov 1, 2014
My lenovo yoga 11 is stuck on boot (preparing automatic repair) for a day now. This tablet is what connects me with family and friends at home (been abroad in Asia for 7 months and counting). I just want it to work again, so if a total reset is needed I'm ok with that.
View 2 Replies
View Related
Jul 19, 2013
Unfortunately I woke up this morning to my Y410P stuck with the Lenovo logo and text saying "Preparing Automatic Repair". After a few moments it will say "Diagnosing your PC " and then "Repairing disk errors. This might take over an hour to complete." Then after a few seconds it restarts and everything happens again.
View 9 Replies
View Related
Dec 2, 2014
I'm very stuck with my Y580, and I'll start by saying that I purchased the laptop about 1.5 years ago, and it came with Windows 8 installed. I didn't like Windows 8 so much, so I decided that I would get Win7. I also decided that I'd put it on an mSATA to speed things up. After doing so, I just formatted the boot partition on the older drive to use for storage. But I kept the recovery partition on there. Everything seemed to work fine until I was recently informed that I should update the BIOS. I followed all of the instructions from Lenovo in updating to the version 8.00, something like 89WW in the file name. Then recently I noticed my temps were realllly hot when gaming... and I don't play graphically demanding games. I monitored my temps and found out that my CPU (i73630QM) was running over 90°c when playing games like LoL, Dishonored, RIFT, Darksiders, and a few others, all on lower settings.
I did some googling about temps and a lot of people were saying that BIOS is often a culprit for high temps. Maybe you've already put two and two together, but it took me until this point to discover that the BIOS I had updated to is a Win8 BIOS, and I'm using Win7. I figured, this is probably a big part of my issue (and even if it's not going to solve the heat issue, I'd still like to have all my ducks in a row and have all my hardware/software/firmware compatible.
As we all very well know from the few years of tampering with these Y580s, the BIOS can't simply just be rolled back. But I figured there had to be a way. After googling around for some time, I ended up trying a few different things; editing the Config file for the earlier version of the Bios (which just resulted in another error and locked up the keyboard and mouse), I tried booting the BIOS image from a USB, but to no avail (I tried both booting from USB and also a force BIOS update, using the fn+B method, which I realize I may be doing incorrectly, as I am not entirely sure what I should name the ROM file... I can't boot windows to use ANDYSTOOL, so I named a bunch of different ROM files with different names that have worked for other people) ... so on and so forth...
The last thing I've tried was Restoring the BIOS to factory settings (within the BIOS) and now the computer will not boot windows. The Lenovo screen Posts, and Windows starts to load, freezes a moment, Blue Screens for a second, then reboots, saying that there is an issue with either Hardware or software, and gives me he option to either boot windows normally (which just results in the same thing again) or to run an automatic repair. I tried the automatic repair and it just sits on the "Preparing Automatic Repair" screen, and will do so for hours with no progress.
View 3 Replies
View Related
Apr 6, 2014
I just got my g500 yesterday (win8, i3) then I am installing autocad 2013 with 30 % battery so i plugged the power cord and remove the battery but after removing the battery it freezes occasionally and the installing of cad got stuck
So I shut down the comp by unplugging the cord, after turning it on it got stuck to a 'scanning and reparing drive (d) : 0%.
I tried something like the preparing automatic repair but after this it will be just a blank sreen for hours.. tried everything
View 9 Replies
View Related
Dec 4, 2014
My mums computer has ended up in a Black screen "Preparing automatic repair" loop and therefore will not boot :(
None of the repair options work from the boot options etc, so I need the OEM win 8.0 installation disk, so that I can at least boot to safe mode and maybe correct from there once out of the boot loop.
View 4 Replies
View Related
Apr 7, 2013
My Dell xps 13 is stuck on the dell logo screen, since its the logo screen i am not even able to go onto bios or boot option or anything, absolutely nothing has been working? is there anything i can do from here? or should i just send it to dell?
View 2 Replies
View Related
Oct 8, 2014
Acer Aspire 5632 stuck on acer logo...
View 4 Replies
View Related
Apr 6, 2013
I have an XPS 13 (L322X) running Windows 8. Yesterday I turned it off with the proper "Shut down" function. Willing to restart it, it never did.
Similarly to the post but without Windows 8 update (nor of other software)!
"I see the Dell logo, then it goes dark (but the screen is on, i can see LED glow at the edge of the screen), nothing happens anymore. If I hit the ESC or Return key I see a progress bar near the bottom of the screen and 'F12 Boot Options' at the lower right corner. There is no indication in the progress bar, so I do not know whether it is showing 0% or 100%. If I do Ctrl-Alt-Delete the laptop starts all over again, Dell logo, dark screen, hit any key, progress bar... and that's it. Hitting the Power button does the same thing, whether I hit it once or hit-and-hold."
I also tried the F12 key, but nothing moves after the "on hold" progress bar. I cannot disconnect the battery, yesterday I unplugged the power adapter and let it run out of battery, restarted but nothing changed.
The only thing I can do is with F2 entering the BIOS but since I am not a tech, I didn't trust to make changes there.
View 2 Replies
View Related
Apr 21, 2013
I have a XPS M1530 that has seen very little use but unfortunately won't boot now. It is stuck on the bios screen that displays the dell logo - the progress bar on this page only displays about 15% complete and will not progress any further under any circumstances. I have performed the diagnostic boot option of holding down the <FN> key before power on and this displays just the caps lock flashing rapidly - the flashing does not halt. The other diagnostic lights (scroll and num lock) remain unlit except at the initial boot they flash once as per normal.
As dell has not published the diagnostic codes. The laptop is "as new" if a few years old now and I would like to keep it for sometime to come - the purchase price at the time was ~£1300. One reason I bought dell was for the after sales care - I understand there have been various issues with this particular series of laptop which is unfortunate but I am hopeful to get it working again at reasonable cost.
View 4 Replies
View Related
Jan 20, 2013
Been working on my laptop all weekend and took an hour break came back and when the laptop tried to boot up got stuck on the dell screen. The screen it is stuck on has the dell emblem in the middle and has inspiron under that and a progress bar that is completely empty. In the bottom left corner is has F2 Setup and below that has F12 Boot Options.
I have tried to turn it on and press F2 all that happens is the F2 becomes highlighted but nothing seems to happen. I can do the same for the F12. I have tried booting it while plugged into wall and when it's not doesn't seem to change anything. I have left it on for a while now and every few minutes the screen goes blank and makes a few clicking noises and a few of the lights on the top corner of bottom part of laptop flash. It then just gets stuck in the same frozen screen.
The laptop has a weeks worth of very important data I need on it....
View 9 Replies
View Related
Mar 6, 2013
I have a Dell Inspiron 1545 that doesn't boot successfully. It gets to the screen indicating "Starting WIndows" and then just sits there. I tried safe booting but when it should be displaying windows files that are loading, the screen just stays blank. I tried selecting "Repair" boot but the system just blinks and returns to the window that asks me to select Repair or Normal Boot. (If I select Normal Boot, it gets to "Starting Windows" and that's it.
I checked out the hard drive externally and it appears the hardware is functioning normally. I successfully booted with Hiren's Boot CD. I would like to attempt a RECOVERY but can't get beyond the Repair screen.
Since Dell doesn't provide an OS disk with the computer that would allow me to reinstall Windows 7...
View 5 Replies
View Related
Dec 18, 2009
I made sure the machine was not in sleep or hibernation mode, and the user states the machine was fine a few hours ago.
I removed the hard drive but that did not change the behavior...
View 9 Replies
View Related
Oct 7, 2013
I got problem with dell laptop, its 2 year old laptop which got stuck on Starting Windows screen ,not able to proceed further.
After checking several posts I tried all the options but it dint work. I tried running diagnostic , I got error message
Error Code: 0f00:1332
hard drive 0 self test log contains previous error.
I run the custom Test and I got this same message .in the custom window where is shows Result I checked the Help tab where I got this message
SATA Hard disk
Disk Drive stores large quantities of computer software and data. The contents of disk drive is preserved when computer is powered off.
Is there any problem with hard disk ?? Is it corrupted ?? Do I need to Replace it ??
View 9 Replies
View Related
Feb 19, 2013
My girlfriends Inspiron 1545 WINDOWS 7 got the blue screen message.
After trying to restore to a prior date it is now stuck in a repair loop.
View 2 Replies
View Related
Oct 21, 2014
I'm stuck in the (windows8) HP pavillion's automatic repair loop and I need to know the safest rest/ way to fix this.
View 6 Replies
View Related
Aug 26, 2014
I got automatic Windows up date last night. After the updates, I can't do anything except turn on the computer, see the HP page, the green log in with password page, then all goes dark blue and freezes. It will not even rcognize the keyboard to back out. It is an HP Envy 20 all in one desktop. I have removed the back, all looks good, everything is secured and in place.
View 1 Replies
View Related
May 8, 2014
My laptop model is DELL XPS 11. when i press the power on button, the Dell logo came out and it loads "preparing automatic repair...", then the whole screen turned black, there is nothing on the screen but I can only see the mouse cursor.
What did i do?I rebooted the laptop and immediately pressed F12 to go into diagnotics. After scanning, there was an error code 2000-0142 and the error message was Hard drive 0 - short self test unsuccessful. I even tried to use recovery media to factory reset my laptop, but it failed.I did not open up my laptop to check for any cable connection problems, because I dont know if it will void my warranty. My laptop is still under warranty.
View 6 Replies
View Related
Apr 18, 2014
I just bought a brand new yoga 2 11 only 10 days ago. I used it this afternoon, closed it up and walked away for a couple hours. This evening I tried to wake it up, and it's stuck on the Lenovo screen. After a while, it said Preparing automatic repair. It spun for 10 minutes and the screen went black. I forced shutdown and walked away, completely frustrated. Now if I try to reboot, all I see is the Lenovo screen. Nothing is happening. What can I do?!
View 3 Replies
View Related
Mar 5, 2013
I have a envy dv6 serial 2ce2502rs6 product b6b49av. It starts up with hp logo and goes to black screen. I tried repair before and it didn't work. I tried the hard restart and it came on and I selected repair and it didn't work again so I selected turn off and now it goes to black screen.
Once unit is powered on keep tapping the F2 key run the diagnostics test . It saysProcessor check passed. Memory quick check passed. Hard drive smart check passed. Hard drive short DST check FAILED.Failure ID OU7ATA-6B877E-QFPK1A-60U503Product iD b6b49avHard drive 1
View 3 Replies
View Related
Mar 14, 2013
This morning when I started my computer, I got a Windows error message giving me two options: to launch Startup Repair to try to repair any errors or to start up normally. I chose error repair and it says it is repairing disk errors and might take an hour to complete. The first time, it said it had fixed errors and I needed to hit "Finish" to restart, which I did, but I ended up with a black screen.
The next time, I chose to start normally, and ended up with a black screen again.
The third time, I did the disk repair again, and go the message that Windows cannot repair my computer automatically, and to hit "finish" to exit and shut down.
I''m still ending up with the black screen. I tried some trouble shooting tips posted in others' forums, but none of the following have worked:
-Draining residual battery power
-Running on-board diagnostics (all areas Passed)
-Rebooting in Safe Mode (I ended up with the black screen again)
View 1 Replies
View Related
Nov 3, 2012
i bought a pavilion G6-2230sa with windows 8 last week It has downloaded automatically the latest updates today and is hanging at 13% every time Message - Configuring windows updates - 13% complete - do not turn off your computer It's been doing this for hours to day and occasionally restarts and starts all over again. How do i get it to complete or stop trying?
View 9 Replies
View Related
Feb 25, 2015
I have a new E1-572G laptop. Long story short, I installed Win 7 on it, and after that, Ubuntu 14.10. I had issues with bootloader, but after fiddling around with legacy/UEFI booting, secure boot, and things like that, I almost successfully configured the laptop. When I selected the ubuntu uefi bootmgr in the bios, in secure boot mode, I rebooted the laptop for what I thought the last time, but then it did not go past the Acer logo. Only combination that works is ctrl+alt+delete. If I remove the hdd, then the acer logo flashes for half a second, and a black screen appears, with a static console cursor at the left upper corner.
I searched a lot in the topic, wanted to reset the bios, but there is no jumper for this, nor can I remove the bios battery. I wanted to reflash the bios, but I could not find proper instructions on this.
View 9 Replies
View Related
Oct 19, 2014
I just bought a HP envy x2 but I'm stuck on the power on password screen. The error code is 68419712.
View 1 Replies
View Related
Apr 12, 2013
I have a Dell Inspiron 1545. So, a few months ago, I got mad at my laptop and slammed the screen down. I think it was taking its sweet time shutting down or something. I can't remember. Anyway, the next time I tried to turn it on, it goes into Startup Repair, and then comes up with a screen of errors, namely "StartupRepairOffline", "Autofailover", "NoOSInstalled". I can go into advanced options and go into DOS command (it comes up to the X drive); I was able to successfully pull off stuff I wanted, but I'm thinking I damaged the hard drive. I've let this sit for awhile, using my daughters' laptop, but now I want mine back and want to repair it. What should I do first? Also, I don't think I have any startup disks or anything like that.
View 5 Replies
View Related
Feb 5, 2013
I bought a new dell inspiron n5050 around 5 months back !!!! it is not starting!!! the dell logo is coming and again it is repeating the same thing !!! i installed xp in the laptop so it is working !!! Earlier i used windows 7 ultimate!!!! But when again installed win 7 it had been installed but again i am facing same problem!!! i have tried change all in boot options but im facing same problem !!! The dell logo is visible again and again but no result!!!
View 2 Replies
View Related
Jul 13, 2014
I have a envy 17 laptop with Windows 8.1 and I was trying to change the display settings after applying one the mouse and all the icons on the desktop disappeared I tried accessing task manager but the screen just switched to a light blue color with no error message. Ive tried restarting it but that hasn't done anything, what to do?
View 9 Replies
View Related
Feb 25, 2014
I tried to install Windows 7 on my computer and it was stuck at "Starting Windows." I turned off the computer (held power button) and when I boot it up it said "Resuming Winfows." Then it went to a black screen. So I turned it off again and it went back to "Resuming Windows." I pressed CTRL + ALT + DELETE and it said resume windows or start windows again. I said start windows again and it went to frozen at "Starting Windows" and I can't boot it up or factory reset.
View 5 Replies
View Related
Apr 13, 2013
My Inspiron N5030 Laptop won't boot it gets stuck after the Dell logo. Then a "_" sign appears at the top left corner of the screen and then it just hangs.
I have already tried the Dell CD and run diagnostics with no problems found. Could it be a software issue or hardware as in malfunctioned hdd?
View 3 Replies
View Related
