HP G6-2230sa OS/Software :: Windows 8 Automatic Update Hangs At 13% - Computer Restarts Gets Stuck At 13% Again
Nov 3, 2012
i bought a pavilion G6-2230sa with windows 8 last week It has downloaded automatically the latest updates today and is hanging at 13% every time Message - Configuring windows updates - 13% complete - do not turn off your computer It's been doing this for hours to day and occasionally restarts and starts all over again. How do i get it to complete or stop trying?
View 9 Replies
ADVERTISEMENT
Dec 2, 2014
I'm very stuck with my Y580, and I'll start by saying that I purchased the laptop about 1.5 years ago, and it came with Windows 8 installed. I didn't like Windows 8 so much, so I decided that I would get Win7. I also decided that I'd put it on an mSATA to speed things up. After doing so, I just formatted the boot partition on the older drive to use for storage. But I kept the recovery partition on there. Everything seemed to work fine until I was recently informed that I should update the BIOS. I followed all of the instructions from Lenovo in updating to the version 8.00, something like 89WW in the file name. Then recently I noticed my temps were realllly hot when gaming... and I don't play graphically demanding games. I monitored my temps and found out that my CPU (i73630QM) was running over 90°c when playing games like LoL, Dishonored, RIFT, Darksiders, and a few others, all on lower settings.
I did some googling about temps and a lot of people were saying that BIOS is often a culprit for high temps. Maybe you've already put two and two together, but it took me until this point to discover that the BIOS I had updated to is a Win8 BIOS, and I'm using Win7. I figured, this is probably a big part of my issue (and even if it's not going to solve the heat issue, I'd still like to have all my ducks in a row and have all my hardware/software/firmware compatible.
As we all very well know from the few years of tampering with these Y580s, the BIOS can't simply just be rolled back. But I figured there had to be a way. After googling around for some time, I ended up trying a few different things; editing the Config file for the earlier version of the Bios (which just resulted in another error and locked up the keyboard and mouse), I tried booting the BIOS image from a USB, but to no avail (I tried both booting from USB and also a force BIOS update, using the fn+B method, which I realize I may be doing incorrectly, as I am not entirely sure what I should name the ROM file... I can't boot windows to use ANDYSTOOL, so I named a bunch of different ROM files with different names that have worked for other people) ... so on and so forth...
The last thing I've tried was Restoring the BIOS to factory settings (within the BIOS) and now the computer will not boot windows. The Lenovo screen Posts, and Windows starts to load, freezes a moment, Blue Screens for a second, then reboots, saying that there is an issue with either Hardware or software, and gives me he option to either boot windows normally (which just results in the same thing again) or to run an automatic repair. I tried the automatic repair and it just sits on the "Preparing Automatic Repair" screen, and will do so for hours with no progress.
View 3 Replies
View Related
May 6, 2014
My Laptop automatically installed the recent windows 8 update during shutdown. After that It is not booting properly. It just restarts repeatedly.
View 3 Replies
View Related
Sep 1, 2014
recently installed an automatic update to windows 8.1. Now I get a black screen after the welcome page. I can load task manager and get to the internet. tried to get to safe mode at startup with f8 but several attempts were unsuccessful. I updated my graphics driver from AMD today and same black screen appears. I also restored sytem to an earlier date using the HP utility with same results - black screen after welcome page.
View 6 Replies
View Related
Aug 26, 2014
I got automatic Windows up date last night. After the updates, I can't do anything except turn on the computer, see the HP page, the green log in with password page, then all goes dark blue and freezes. It will not even rcognize the keyboard to back out. It is an HP Envy 20 all in one desktop. I have removed the back, all looks good, everything is secured and in place.
View 1 Replies
View Related
Dec 31, 2014
computer turns on but wont go to windows, stuck on a Dell screen, press ctrl alt delete 2 option F2 or F12, almost as if windows is no longer installed, wifes computer, not sure if she picked up a virus, computer was working fine till the other day now nothing.
View 4 Replies
View Related
Feb 19, 2015
My daughter's Acer is 2.5 years old and it's running Windows 7. She recently rebooted it last week for a Windows Update and since then it starts up but hangs, with the hard drive light blinking slowly. I ran it in Safe Mode and it gets through CLASSPNP.SYS then hangs. According to articles this is usually a hardware problem. The only option I have with this OS is to bring up the Command Prompt. I've tried System File Checker - no go. System Repair comes back with unknown error and what looks like a bad Driver.
I was able to build a new partition (100+GB) and do a clean install of Windows 7 x64 Ultimate w/ SP1. This went through fine, though I would have to load the Acer drivers for the network card, etc. to finalize it. The point here is that this shows that the hard drive isn't the issue.
My fear is that Windows installed either some sort of driver or other update that has now caused the current OS on her laptop to be unusable. I went to do a System Restore and the only restore point it had was the Critical Update that she rebooted to on 2/13. Trying to roll back to that Restore Point didn't work.
View 5 Replies
View Related
Nov 1, 2014
My lenovo yoga 11 is stuck on boot (preparing automatic repair) for a day now. This tablet is what connects me with family and friends at home (been abroad in Asia for 7 months and counting). I just want it to work again, so if a total reset is needed I'm ok with that.
View 2 Replies
View Related
Nov 18, 2014
So recently I was on my laptop, and I walked away to go handle something it died of no more battery charge pretty normal I left and tried to use my laptop when I came home some hours later, and now it will not proceed to my password screen.It turns on and the circle loader just spins I'm putting this up from my phone seeing as I can't use my laptop. I ran some test that told me it failed because my dst drive , or something hard drive 1, system E I'm not really sure.
Sometimes when I turn it on it will say "starting automatic repair" or something I'll leave it on then the screen just goes black, it'll still be running. I really don't know what's wrong with it...it's very sudden my laptop never occurred problems before. It won't even load when I press f12.I have a HP ENVY m6 sleekbook. It's not touch screen. It has beats audio but, it doesn't have a press able beats audio button. No CD/disk drive I can't load disk in my laptop. The batteries built in Model # m6-k010dxHard drive short dst fails extensive test....
View 8 Replies
View Related
Jul 19, 2013
Unfortunately I woke up this morning to my Y410P stuck with the Lenovo logo and text saying "Preparing Automatic Repair". After a few moments it will say "Diagnosing your PC " and then "Repairing disk errors. This might take over an hour to complete." Then after a few seconds it restarts and everything happens again.
View 9 Replies
View Related
Apr 6, 2014
I just got my g500 yesterday (win8, i3) then I am installing autocad 2013 with 30 % battery so i plugged the power cord and remove the battery but after removing the battery it freezes occasionally and the installing of cad got stuck
So I shut down the comp by unplugging the cord, after turning it on it got stuck to a 'scanning and reparing drive (d) : 0%.
I tried something like the preparing automatic repair but after this it will be just a blank sreen for hours.. tried everything
View 9 Replies
View Related
Jan 17, 2015
I have tried taking the battery out, and letting pc start w/o it, hitting the f8 key and trying each solution, System restore won't work, and each fix I read about won't work either. I hate re installing the oS, as I lose everything on my pc.
View 1 Replies
View Related
Sep 1, 2014
I updated my laptop from windows 8 (when sound worked fine) to windows 8.1 where it doesn't. If I go to the control panel and unistall the realtek drivers, then re-install them the sound works, that is until I switch off (yes I know - don't switch off then ...
When the computer restarts there is no audio....again. the only way I have found to get it working is the uninstall - re-install of the drivers.
View 9 Replies
View Related
Mar 18, 2012
I have a Dell XPS 17 laptop that seems to be stuck in the Startup Repair Loop, and I have tried everything to get out of the startup repair mode, but nothing seems to be working. I have tried F8, Safe Mode, System Restore (to two different dates), and the command prompt, but everything happened to no avail. I even did the Diagnostics test (long version), and that came up with nothing. I purchased the laptop back in October of 2010, and it has Windows 7. The laptop went into this Startup repair loop about a day after it did a Windows "Critical" update. One of the programs that the update tried to install onto my computer was Google Chrome (which it, according to the laptop, failed to install properly). It makes me wonder if the update uninstalled a driver, or turned a driver bad.
Two errors that I repeatedly get are "Corruptfile" and "Autofailover". I truly hope that this is something that can be fixed, and I hope that I will not have to restore my laptop back to it's factory settings.
View 7 Replies
View Related
Nov 22, 2014
I've got a Pavilion g6 2215so.The computer sometimes hangs at startup and the only way to go around it is to unplug the battery and start it up without it.
I thought that maybe there are some newer BIOS drivers or firmware that would solve this.
But I cannot find the drivers for this model at all at the support site.I've tried to have the system identified as well but it doesn't come up with anything really.
View 3 Replies
View Related
Nov 12, 2014
I'm attempting to install Windows 7 (64Bit) on a HP Pavilion G6 2230SA Notebook which was originally delivered with Windows 8.
PCI DeviceSM Bus ControllerUniversal Serial Bus (USB) Controller
View 4 Replies
View Related
Jun 25, 2014
I have an HP Pavilion g6-2293sa Notebook PC, which updated itself automatically last week and as a result the keybard stopped working completely.
I reset the PC to an earlier time point but this did not work. HP's support topics suggested uninstalling my keyboard river, which I did, and then downloading 'original drivers' - but this does not come up as an option on the download page. Likewise, there is no available update under the Driver - Keyboard, Mouse, and Input Devices link.
View 9 Replies
View Related
Sep 20, 2014
This computer is my friends. I don't know what she did to it. I have fixed it before but this has been running a for hours and the same message stays there.
"HP 2000 error failure configuring windows update revertong changes do not turn off computer"
I forgot too say it is Windows 8.
View 1 Replies
View Related
Aug 18, 2014
Since Windows did an automatic update to my CompaqCQ58 laptop (running on Windows 8.1) on 16th August I've lost all sound.
I've read Mario's methods for correcting the fault, but my list of "Installed Updates" does not show KB2962407.
There is an update on 16/8/14 numbered KB2962409. Is this the one I should uninstall and hide, or am I going to lose some other function of the laptop?
Surely I am not the only one affected by this glitch. Are HP bombarding Windows with demands for them to correct their fault, or are we all expected to repair our own machines!
View 5 Replies
View Related
Mar 13, 2013
I updated my friends system to the f.20 bios - and it now comes up that the bios update did not succeed, and then it restarts.
This is an endless loop - which never lets me boot into windows - so I cannot go back to a previous version of the BIOS.
I have been reading around the forums and discovered a method to try an emergency recovery by getting the rompaq bios and holding down the Windows Key + B when I turn on the system.
Just bought an external USB Floppy drive to try this emergency recovery. I tried the USB - but it wouldn't work. I am getting different results here - but not what I want.
With the USB Floppy plugged in: When I hold down Win+B - the caps light flashes for a lot longer now, it looks like it initializes the floppy drive (green light comes on for just a moment) - but then nothing - just flashing caps lock for a bit and then finally a restart again into the doom loop. It never appears to begin to read the floppy disk or search for a bios file.
What am I doing wrong? What can I try? Does the disk need to be leabeled a certain way? Does my BIOS file need to be renamed?
View 5 Replies
View Related
Jan 6, 2015
I have been having several problems with this laptop:
- When the computer boots, it boots extremely sluggish and takes as long as 15 MINUTES to finally be able to use the laptop without issues.
I tried wipping the OS and install Windows 8.1 again (I deleted all the partitions and reinstalled a new copy of windows), it worked a bit, the sluggish boot was reduced from 15 minutes to 2 or 3 minutes. I was updating all the drivers and everything, when suddenly i thought it was a good to update the bios in order to finally fix that problem.
As soon as i started the bios update, the laptop restarted and showed a blue box with the text: "Flashing Boot Block", below, it shows the percentage number and it's stuck on 77%. I have leave the laptop for hours on that screen and the number dont increase. I tried to restart the laptop by doing a hard reset, but as soon as i turn on the laptop the "Flashing boot Block" Box appear and it starts all over again, and again, it gets stuck at 77%.
View 1 Replies
View Related
Apr 6, 2013
I have an XPS 13 (L322X) running Windows 8. Yesterday I turned it off with the proper "Shut down" function. Willing to restart it, it never did.
Similarly to the post but without Windows 8 update (nor of other software)!
"I see the Dell logo, then it goes dark (but the screen is on, i can see LED glow at the edge of the screen), nothing happens anymore. If I hit the ESC or Return key I see a progress bar near the bottom of the screen and 'F12 Boot Options' at the lower right corner. There is no indication in the progress bar, so I do not know whether it is showing 0% or 100%. If I do Ctrl-Alt-Delete the laptop starts all over again, Dell logo, dark screen, hit any key, progress bar... and that's it. Hitting the Power button does the same thing, whether I hit it once or hit-and-hold."
I also tried the F12 key, but nothing moves after the "on hold" progress bar. I cannot disconnect the battery, yesterday I unplugged the power adapter and let it run out of battery, restarted but nothing changed.
The only thing I can do is with F2 entering the BIOS but since I am not a tech, I didn't trust to make changes there.
View 2 Replies
View Related
Mar 26, 2010
I need to clarify some few simple things about win7 x64 and 4810TG with su9400 and HD4330.
The batterylife sucks. Up to 3 hours maximum.
Seems like the automatic graphic-switch does not work. I play CS:Source with 20fps with everything on low.
HDMI does not work.
View 10 Replies
View Related
Oct 21, 2014
I'm stuck in the (windows8) HP pavillion's automatic repair loop and I need to know the safest rest/ way to fix this.
View 6 Replies
View Related
Dec 19, 2014
The hard drive on my Aspire 5745 was replaced (same size 640 GB) when I install Windows, it hangs on the Windows logo as its swirling and about to start. I have checked in the BIOS to disable UEFI boot but unable to see this option.
View 1 Replies
View Related
Nov 25, 2014
I have a Latitude E6320, running Windows 7 SP 1 (64-bit). I have all the required and recommended patches installed. I generally use my laptop on a part-replicator. Recently, my laptop has been restarting when I hibernate my computer using either the on/off switch or the start button on the task bar.
View 3 Replies
View Related
Nov 21, 2011
All Windows, drivers and antivirus are updated and free of virus and/ro coruped files. Chekdisk reports no problem. cannot read Mini DUMP files. Blue screen to quick to read.
View 5 Replies
View Related
Feb 16, 2014
I have just done a restore using OneKey. And Windows 7 has updated itself.
Now, After I log in to windows 7, after 20 seconds, before it initialises all the programs on the laptop, it restarts.
What can I do to stop the laptop from restarting?
View 5 Replies
View Related
Aug 23, 2014
I've tried a hard reset (pulling battery, unplugging power cord and holding power button for 20 seconds), then reinstalled battery, plugged in power cord and started laptop by hitting esc and checking all of the parameters listed - (running tests offered - all came back okay). I tried to do a safe restart with the F8 key, but it did not accept and went to normal startup. What am I missing?
I can't get the screen to stabilize long enough to get a lock on an icon for opening a program or the main page.
View 1 Replies
View Related
Feb 16, 2010
I have a hp pavilion dv5-1170ei and it had problems with the audio and the quick launch buttons after upgrading to Win 7. I decided to update the bios because that was the only thing that i had not updated. Now the computer is frozen with the BIOS update still running. I once had the same problem with a dv5-1199ei and it worked fine after upgrading the BIOS. By the way i upgraded from Vista Home premium to Win 7 Ultimate.
View 9 Replies
View Related
