I reinstalled windows on my laptop, and I go to re enroll my fingerprint with the fingerprint reader. The Fingerprint reader suite says I have no fingers enrolled, but when I go to enroll my finger again, it says the fingerprint is already enrolled. But I can't find it anywhere. I'm assuming the saved fingerprints are saved to the device itself, but I can't seem to import the saved prints.
I'm having trouble with the fingerprint reader on my M4400. I have done a clean install of Windows 7 RC x64, and installed the relevant drivers, but the only software that recognizes the fingerprint reader is Embassy Wave bundled by Dell (which seems a bit, well, clunky ).
I have tried UPEK's Windows 7 software, which installs fine, but it cannot find the fingerprint reader. The same happens with DigitalPersona too; it installs perfectly but can't find the device. The fingerprint reader is listed in the control panel (it shows as '5880', which is the combined Broadcom fingerprint reader, smart card reader etc.), so I'm not sure why nothing but Dell's software can 'see' it.
I have purchased a new laptop (Vostro 3560) with Windows 8 64 Bit. The fingerprint reader stops working, after reinstalling the touchpad and fingerprint reader sometimes the reader starts working again (i.e its detected and I can login to windows by swiping my finger). It says the fingerprint reader is not found (on the Windows Login Screen) and the icon in the DP Fingerprint Software has an x in a red circle.
I just upgraded to Windows 8.1, and now the fingerprint reader doesn't work anymore.
I know that Win 8.1 has built-in biometrics support, so I tried uninstalling HP SimplePass, without success. I updated the drivers to the latest I found (184.108.40.206), I tried uninstalling/reinstalling the drivers, I started the "Windows Biometrics" service, I basically tried everything I could think of.
Right now, the Fingerprint reader drivers are installed correctly and it's detected by the system, but in Control Panel, the "Biometrics" category is not there. Also, in PC Settings => Accounts => SIgn-on, the Fingerprint option is disabled.
I installed Windows 8 on my Vostro 3560 and even installing the new driver for Win8 video card AMD HD 7670 Randeon the note presents several bugs this board, such as:* apps made for Win8 (with technology underground) not roam well with AMD board, where they are fighting or simply leave the slow note.* The computer now does not go into an idle state automatically after the time set in the Power Options, due to various errors that prevent this driver please note the suspended state.* The fingerprint reader no longer works at the log on screen or lock Windows 8. The reader only works when I'm on the desktop or on the start screen, also due to a problem with the video card drivers because it is causing several incompatiblidades system.All these mistakes I vii event log windows.Have I contacted AMD who said that Dell is to update the driver for the notebook has two cards (intel and AMD) and fits Dell make changes and corrections.And then Dell??
Symptom: when trying to enroll a fingerprint, I get the message: 'Use a longer stroke when scanning your fingerprint,' the sensor light turns from green to blinking orange (3 times), then back to green. Same happens when when trying to enroll from Windows PC Setting/ Sign-in Options/ Fingerprint (Add).
What I tried: uninstalling ThinkVantage Fingerprint Software and Driver (to include selecting 'Delete the driver software for this device'), rebooting, using Lenovo System Update to re-install ThinkVantage Fingerprint Software, rebooting. Have also tried to manually install previous versions of the Fingerprint Software to no avail.
I had this similar problem in the past, since upgrading from Windows 8 to 8.1, but the steps above usually resolved it.
I have a new W510 but I cannot get the fingerprint reader working for Windows logon. I have the Lenovo fingerprint software installed. It can enroll my fingerprint with ease, which also shows that the reader works. I have turned on the option "use fingerprint scan instead of password when logging into windows". When I restart Windows, I see a fingerprint logon option, but it still defaults to CTRL+ALT+DELETE. When I pick the fingerprint option and scan my fingerprint, the lght blinks twice and nothing happens. I know from my old W510 that I should be seeing a Lenovo Fingerprint icon on the logon screen, but I just cannot get that to display. What have I missed?
The virtual agent was no support - it gives me a setting that doesn't exist, tells me to reboot, tells me that the first time I log in I will need both fingerprint and password, but afterwards it only needs fingerprint.
Because of a virus, I recently had to reinstall Windows 7 Professional 64-bit. I have gotten everything else working except the fingerprint reader.I have installed the Validity Fingerprint Reader driver from the Dell Support site. The fingerprint reader shows up in the Device Manager. However, the Biometric Devices applet doesn't appear in the Control Panel.
I tried letting Windows update detect the fingerprint reader. It installed a driver for a Synaptics device. This was enough to get the Biometric Devices applet to appear in the Control Panel. However, when I tried to configure the fingerprint reader, I got an error saying no fingerprint management software was installed. I have seen lots of posts online directing me to validityinc.com for drivers or the DigitalPersona software, but Validity Inc. seems to have gone out of business. The DigitalPersona software is available on the Dell Support site for my service tag.
I have even tried installing the Windows 8 Validity Sensor Driver for my laptop, but though it successfully installs, it produces the same results.
I wanted to do a clean install on my new laptop and this is the only thing I can't seem to get working so far. The Validity driver from the HP website is installed but, there's no security software listed for this device. I tried Protecttools and it said it wasn't supported on this device, I also tried Simple Pass and it wouldn't start without crashing. I'm not even sure I'm installing the correct software.
I'm not able to use my finger print reader/simple pass now that I've downloaded windows 8.1 Been reading some of the other questions and difficulties people are having but haven't been able to still get it to work.
I have an HP Envy M6 1125dx 00179-60246-20486-AA0EM 64-bit Intel Core i5 Running Windows 8.1
I have a brand new T540P with a Validity fingerprint reader.
Rougly 80% of the time, the Fingerprint reader is unresponsive at the windows login screen after waking the computer from sleep. It works 100% of the time when booting from an off position, however. Once logged in, it also works 100% of the time. The issue only arises when logging into windows.
Things I have tried
-uninstalling/installing device in device manager and finger print manager pro software -setting fingerprints through both fingerprint manager pro software (lenovo) OR through the built in windows fingerprint control panel options -disabling "allow windows to turn off this device to save power" in device manager.
I should note as well that I have another T540P that I ordered as a replacement. Both models experience the same issue.
Is this a platform wide issue affecting all T540P models?
I have a T440p with Windows 7 Pro. Except on rare occasions, I am unable to log into Windows with my first swipe across the fingerprint reader. The green light is on when I do the first swipe and it immediately goes off and stays off for around 15 seconds, during which time another swipe does nothing. Then the green light will return and a second finger swipe will log me on.
It's made using the fingerprint reader for login impractical, because it's faster to just go to the password screen and log in that way.
Thinkpad T440p: i7-4800MQ | Crucial 16GB DDR3-1600, 9-9-9-24 | Samsung 840 Evo 500GB SSD | Intel 7260 Dual-Band AC Wireless | Windows 7 Pro
i have been trying to figure this out for a week with no luck and even no luck through dell.
I have a new latitude e6400, i originally set my fingerprint, then decided to clean install vista 64 bit, after tons of problems, i then abandoned the effort. Went back to the original vista business 32 bit, however, everytime i turn on my computer, during pre-boot it asks me to scan my finger to get access to my computer, i just want to disable it, but it will not let me, i went into security setting in dell control point, and in that funky embassy software, i cannot find a way to disable the finger print reader, i dont want to uninstall just disable, any insights?
I just received my E6400 from Dell today and setup the fingerprint reader. I noticed it only works when I boot up the notebook and then I scan to get to the windows login screen.
I was wondering If I can set it up so that I scan to login to windows rather than typing in a password. I was also wondering If I could configure it to login to websites for things such as email since I know you can do that with Windows Fingerprint Reader.
i got my studio 17 and as soon as i got it i saw a little youtube video on the fingerprint reader and was wondering if it works well cuz i didnt order it with one but it looks pretty cool and fuctional and i am sick to death of typing in passwords if it is all its cracked up to be is there any way i could buy one and install it myself? thank you for your replies.
When I ordered my E6400, it said on the Dell configuration pages that it would have a UPEK fingerprint reader. I am quite sure I got another fingerprint reader since it says "Broadcom USH CV w/Fingerprint Swipe Sensor" in Device Manager. When I look closely at the quotes I got from the Dell sales guy it doesn't say UPEK anywhere on the E6400 quote but it does say UPEK on the E6500 quote.
Does the E6500 have the same (non-UPEK) fingerprint reader?
Is it possible to get the E6400 with a UPEK fingerprint reader?
I would like to have a laptop with the UPEK fingerprint reader since I ordered a Dell USB UPEK fingerprint reader with my laptop that I intend to use when the computer is in the docking station. The USB UPEK fingerprint reader doesn't work with the fingerprint software on my E6400. I am not 100% sure it will work even if I would have the same brand of fingerprint reader in the laptop but I think it should increase the chance a lot.
This is my first laptop with a fingerprint reader. I dont know much about them but would like to start using it. I cant find much documentation about it other than the Embassy Security Center software but there is a lot to that software (at least thats new to me).
Is this what I need to use for using the fingerprint or password for logging on my computer? What all are you people doing with yours?
My old xp laptop had a password for windows log on but that was much simpler to set.